[DeTomaso] Holley Sniper

[Ken Green]

 When I called Walbro they didn't want to talk about custom installations and referred me to:
https://www.tanksinc.com/?msclkid=7d321f5a859c1429c2757b24cc95827f
These folks were very helpful and put together a kit for me for an in-tank pump in a deep tank.  

I think Holley and others sell the Tanks Inc. kits with the name changed.

Ken




    On Monday, June 5, 2023 at 12:28:27 PM PDT, richard boschert via DeTomaso <detomaso at server.detomasolist.com> wrote:  
 
   David, Walbro GSL392 is the fuel pump you want. It is the fuel pump
  that Holley used to include before they swapped to a cheaper no name
  chinese replacement.
  I have done several of the sniper swaps and i would not recommend the
  master kit.Holley has been cutting corners with certain add on parts
  like the fuel pump and O2 sensor.Speaking of the O2 sensor,get a Bosch
  17025 sensor and keep the holley supplied one as a backup.
  You should remove the drain plug from the bottom of the fuel tank and
  get a 22mm i believe adapter fitting to then go to the fuel pump
  mounted below the tank on the frame rail.Electric pumps are pushers so
  you want to mount them low and near the fuel supply unlike the engine
  mounted mechanical fuel pump.
  Richard
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   When I called Walbro they didn't want to talk about custom
   installations and referred me to:
   [1]https://www.tanksinc.com/?msclkid=7d321f5a859c1429c2757b24cc95827f
   These folks were very helpful and put together a kit for me for an
   in-tank pump in a deep tank.
   I think Holley and others sell the Tanks Inc. kits with the name
   changed.
   Ken

   On Monday, June 5, 2023 at 12:28:27 PM PDT, richard boschert via
   DeTomaso <detomaso at server.detomasolist.com> wrote:
     David, Walbro GSL392 is the fuel pump you want. It is the fuel pump
     that Holley used to include before they swapped to a cheaper no name
     chinese replacement.
     I have done several of the sniper swaps and i would not recommend the
     master kit.Holley has been cutting corners with certain add on parts
     like the fuel pump and O2 sensor.Speaking of the O2 sensor,get a
   Bosch
     17025 sensor and keep the holley supplied one as a backup.
     You should remove the drain plug from the bottom of the fuel tank and
     get a 22mm i believe adapter fitting to then go to the fuel pump
     mounted below the tank on the frame rail.Electric pumps are pushers
   so
     you want to mount them low and near the fuel supply unlike the engine
     mounted mechanical fuel pump.
     Richard
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [2]DeTomaso at server.detomasolist.com
   [3]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.tanksinc.com/?msclkid=7d321f5a859c1429c2757b24cc95827f
   2. mailto:DeTomaso at server.detomasolist.com
   3. http://server.detomasolist.com/mailman/listinfo/detomaso