[DeTomaso] Holley Sniper
richard boschert
theemonkey at yahoo.com
Mon Jun 5 15:28:19 EDT 2023
David, Walbro GSL392 is the fuel pump you want. It is the fuel pump that Holley used to include before they swapped to a cheaper no name chinese replacement.I have done several of the sniper swaps and i would not recommend the master kit.Holley has been cutting corners with certain add on parts like the fuel pump and O2 sensor.Speaking of the O2 sensor,get a Bosch 17025 sensor and keep the holley supplied one as a backup.You should remove the drain plug from the bottom of the fuel tank and get a 22mm i believe adapter fitting to then go to the fuel pump mounted below the tank on the frame rail.Electric pumps are pushers so you want to mount them low and near the fuel supply unlike the engine mounted mechanical fuel pump.
Richard
-------------- next part --------------
David, Walbro GSL392 is the fuel pump you want. It is the fuel pump
that Holley used to include before they swapped to a cheaper no name
chinese replacement.
I have done several of the sniper swaps and i would not recommend the
master kit.Holley has been cutting corners with certain add on parts
like the fuel pump and O2 sensor.Speaking of the O2 sensor,get a Bosch
17025 sensor and keep the holley supplied one as a backup.
You should remove the drain plug from the bottom of the fuel tank and
get a 22mm i believe adapter fitting to then go to the fuel pump
mounted below the tank on the frame rail.Electric pumps are pushers so
you want to mount them low and near the fuel supply unlike the engine
mounted mechanical fuel pump.
Richard
More information about the DeTomaso
mailing list