[DeTomaso] Dual points gap setting?

[Sean Korb]

Thank you Larry, I've never been able to figure this out and I have 2
Dwell/Tachometers in my toolbox after letting go of others!  The
textbook instructions never made sense to me. This is the best
explanation I've seen and it makes perfect sense on how to use the
tool now.

sean

On 9/2/22, Larry Stock <larrys at panteraparts.com> wrote:
> Breaker point gap for Minimum smog 71 Engines was .021" but you really
> should really rely on the dwell readings of 24 to 29 degrees of Dwell angle.
> As soon as you set your points and put power to them, there will be electro
> deposited degeneration of the points themselves which will result in a
> change of dwell and your engine timing.
> It is advised to set the points near the minimum dwell of 24 degrees for
> best longer term results as it will change over use.
> If the Dwell angle is too LOW, (under 24 degrees) then the breaker points
> are too WIDE
> If the Dwell angle is too HIGH, (over 29 Degrees) then the Breaker points
> are Too CLOSE
> Larry Stock
> Pantera Parts Connection LC
> 550 Mallory Way
> Carson City NV 89701
> www.PanteraParts.com
> PH  775-283-4411
> Fax 775-283-4410
> Cell 1-800-DeTomaso 800-338-6627
>
>
> On 9/2/22, 9:34 AM, "DeTomaso on behalf of Forest Goodhart"
> <detomaso-bounces at server.detomasolist.com on behalf of forestg at att.net>
> wrote:
>
>        If I remember correctly the setting is .018 per set.
>
>        On Friday, September 2, 2022 at 06:01:36 AM PDT, Panteratime via
>        DeTomaso <detomaso at server.detomasolist.com> wrote:
>          Folks,
>          Hope all is well!  A friend of mine is asking for the gap setting
> on
>          stock distributor points.  (I couldn't find it in my "fat"
> technical
>          information manual.)  Anyone know this Gap setting?
>          Thank you in advance!
>          .
>        _______________________________________________
>        Detomaso Email List is not managed by POCA
>        Posted emails must not exceed 1.5 Megabytes
>        DeTomaso mailing list
>        [1]DeTomaso at server.detomasolist.com
>        [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>        To manage your subscription (change email address, unsubscribe, etc.)
>        use the links above.
>        Members who post to this list grant license to the list to forward
> any
>        message posted here to all past, current, or future members of the
>        list. They also grant the list owner permission to maintain an
> archive
>        or approve the archiving of list messages.
>
>     References
>
>        1. mailto:DeTomaso at server.detomasolist.com
>        2. http://server.detomasolist.com/mailman/listinfo/detomaso
>     _______________________________________________
>
>
>     Detomaso Email List is not managed by POCA
>     Posted emails must not exceed 1.5 Megabytes
>     DeTomaso mailing list
>     DeTomaso at server.detomasolist.com
>     http://server.detomasolist.com/mailman/listinfo/detomaso
>
>     To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
>
>     Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.


-- 
Sean Korb spkorb at gmail.com http://spkorb.org (est 1994)
"Computers are useless.  They can only give you answers." -P. Picasso