[DeTomaso] Diameter of AC Lines
Jeff Detrich
jjdetrich at gmail.com
Thu Sep 1 23:33:15 EDT 2022
Wow. Those would even better if the came with a 90degree bend to go around
corners.
Jeff
6559
On Thu, Sep 1, 2022 at 6:32 PM Larry Finch via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Mike,
>
> Since apparently you have not yet purchased your hoses, I would most
> strongly with sincere urging suggest you look into the hose and fitting
> system originally introduced by Aeroquip as their EZClip system, and
> now available from other sources.
>
> [1]https://youtu.be/a3k1zDGNujI
>
> Those hoses are the smallest of any currently available. I was able to
> pull them through my rocker without any difficulty.
>
> Calculate the length of each size hose you need, six, eight, and 10.
> Determine the fittings you need for each hose size and send in your
> order.
>
> You will be able to install your hoses without any connectors as the
> connectors require no crimping. That is why they were so easy for me to
> install in my rocker panels. Connectors are easily installed by hand
> once your hose length has been accurately established.
>
> In the photo you will see those two hoses installed in 2511 would
> require an oval hole a little over 1 inch wide. The larger hole they
> are passing through was the hole size required for the previous
> "barrier" type hoses installed by Dennis.
>
> [cid:2BE0FBB8-9FD8-4937-B05E-C129657A4379-L0-001]
>
> Thanks for getting the initial word out on these belongs to John
> Taphorn.
>
> I am now a firm convert and you owe yourself a close look.
>
> Larry
>
> Sent from me using a magic, handheld electronic gizmo.
>
> References
>
> 1. https://youtu.be/a3k1zDGNujI
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
Wow. Those would even better if the came with a 90degree bend to go
around corners.A
Jeff
6559
On Thu, Sep 1, 2022 at 6:32 PM Larry Finch via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
A A Mike,
A A Since apparently you have not yet purchased your hoses, I would
most
A A strongly with sincere urging suggest you look into the hose and
fitting
A A system originally introduced by Aeroquip as their EZClip
system, and
A A now available from other sources.
A A [1][2]https://youtu.be/a3k1zDGNujI
A A Those hoses are the smallest of any currently available. I was
able to
A A pull them through my rocker without any difficulty.
A A Calculate the length of each size hose you need, six, eight,
and 10.
A A Determine the fittings you need for each hoseA size and send
in your
A A order.
A A You will be able to install your hoses without any connectors
as the
A A connectors require no crimping. That is why they were so easy
for me to
A A install in my rocker panels. Connectors are easily installed by
hand
A A once your hose length has been accurately established.
A A In the photo you will see those two hoses installed in 2511
would
A A require an oval hole a little over 1 inch wide. The larger hole
they
A A are passing through was the hole size required for the previous
A A "barrier" type hoses installed by Dennis.
A A [cid:2BE0FBB8-9FD8-4937-B05E-C129657A4379-L0-001]
A A Thanks for getting the initial word out on these belongs to
John
A A Taphorn.
A A I am now a firm convert and you owe yourself a close look.
A A Larry
A A Sent from me using a magic, handheld electronic gizmo.
References
A A 1. [3]https://youtu.be/a3k1zDGNujI
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:detomaso at server.detomasolist.com
2. https://youtu.be/a3k1zDGNujI
3. https://youtu.be/a3k1zDGNujI
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list