[DeTomaso] "All metal" Shifter - Improvement?

[Mike Drew]

Joe,

Now you’re talking!

Pantera Performance Center sells a replacement bearing and rod that was one of the better upgrades on both my car and Lori’s. Although I suppose one could get away with just the bearing alone, they include a rod with a hardened end.

Mike

Sent from my iPad

> On Nov 30, 2022, at 07:05, JFByrd via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
> I might NOT like the answers, But I'll ask any way.
> 
> Would there be an improvement replacing the trunnion rod support with a self-aligning "rod end" bearing?
> In specific an 18mm low friction composite.    I got a pic of one in use years ago from someone.
> (I'm currently in a major dispute with shop and this is one of many reasons)
> Joe
> 
> -----Original Message-----
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Mike Drew via DeTomaso
> ....d
> Subject: Re: [DeTomaso] Cable Shifter - Improvement?
> 
> Mike,
> 
> .....  compared to an all-metal shifter. ...
> Mike
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.