[DeTomaso] Decklid Corner Bumpers

[Larry Finch]

Mike,

These are what I used. Should be available at hardware stores, but here is an eBay auction:



This is what they look like installed on 2511:





Drill and tap a .125 inch steel tab, weld in place. Pay attention to the mounting of the tab so you have some adjustment room

Larry 

Sent from me using a magic, handheld electronic gizmo. 
-------------- next part --------------
   Mike,

   These are what I used. Should be available at hardware stores, but here
   is an eBay auction:

   [cid:AF5EB873-753F-459F-A7AD-CAFC50230ED4-L0-001]

   This is what they look like installed on 2511:

   [cid:F1907B74-3649-45B4-B7DB-56555566D29E-L0-001]

   [cid:0962279F-7889-445E-850E-724BE3A3FA8D-L0-001]

   Drill and tap a .125 inch steel tab, weld in place. Pay attention to
   the mounting of the tab so you have some adjustment room
   Larry
   Sent from me using a magic, handheld electronic gizmo.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 327728 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20220827/65e646d8/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 21557 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20220827/65e646d8/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.jpeg
Type: image/jpeg
Size: 24176 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20220827/65e646d8/attachment-0002.jpeg>