[DeTomaso] Clutch master cylinder seal

[Julian Kift]

Doug,

I installed the kit in my master and it functions as it should. I believe there is a CNC square style and round style master, I’m not sure if that is the differentiator between early and late.

Julian

On Sep 9, 2021, at 19:49, Doug Braun <doug351c at gmail.com> wrote:


Thanks Julian!

The site says: “Please Note, these seal kits will not fit early style CNC master cylinders.
(Call for identifying which CNC style master cylinder style you have)

Have you verified that the seal kit you got, fits your master?

Doug

From: Julian Kift
Sent: Thursday, September 9, 2021 7:35 PM
To: Doug Braun <doug351c at gmail.com>
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Clutch master cylinder seal

Is that the CNC brake master? The owners of CNC Brake retired and shut up shop, I recently got a seal kit from Race Ready products, but afraid I don’t have a cross reference to a generic part from the local Auto Parts store.

https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/

Julian


On Sep 9, 2021, at 19:15, Doug Braun <doug351c at gmail.com<mailto:doug351c at gmail.com>> wrote:
   Guys,


  Is there an off the shelf hydraulic seal that will fit the aluminum
  aftermarket Clutch master cylinder (the one with the knurled, round,
  aluminum cap).  We have a Pantera that's broken down in Richland, WA on
  the trip they're on with Panteras NW so then need it quick.


  My cross reference only shows seals for the stock clutch master
  cylinder.


  Doug Braun

  Blue 73L #5505
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com<mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   Doug,

   I installed the kit in my master and it functions as it should. I
   believe there is a CNC square style and round style master, I'm not
   sure if that is the differentiator between early and late.

   Julian

     On Sep 9, 2021, at 19:49, Doug Braun <doug351c at gmail.com> wrote:

   Thanks Julian!


   The site says: "Please Note, these seal kits will not fit early style
   CNC master cylinders.
   (Call for identifying which CNC style master cylinder style you have)


   Have you verified that the seal kit you got, fits your master?


   Doug


   From: Julian Kift
   Sent: Thursday, September 9, 2021 7:35 PM
   To: Doug Braun <doug351c at gmail.com>
   Cc: detomaso at server.detomasolist.com
   Subject: Re: [DeTomaso] Clutch master cylinder seal


   Is that the CNC brake master? The owners of CNC Brake retired and shut
   up shop, I recently got a seal kit from Race Ready products, but afraid
   I don't have a cross reference to a generic part from the local Auto
   Parts store.


   [1]https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylind
   er-seal-kits/


   Julian

     On Sep 9, 2021, at 19:15, Doug Braun <[2]doug351c at gmail.com> wrote:

     Guys,
     Is there an off the shelf hydraulic seal that will fit the aluminum
     aftermarket Clutch master cylinder (the one with the knurled, round,
     aluminum cap).  We have a Pantera that's broken down in Richland, WA
   on
     the trip they're on with Panteras NW so then need it quick.
     My cross reference only shows seals for the stock clutch master
     cylinder.
     Doug Braun
     Blue 73L #5505
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [3]DeTomaso at server.detomasolist.com
   [4]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/
   2. mailto:doug351c at gmail.com
   3. mailto:DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso