[DeTomaso] Clutch master cylinder seal
Doug Braun
doug351c at gmail.com
Thu Sep 9 22:49:40 EDT 2021
Thanks Julian!
The site says: “Please Note, these seal kits will not fit early style CNC master cylinders.
(Call for identifying which CNC style master cylinder style you have)
Have you verified that the seal kit you got, fits your master?
Doug
From: Julian Kift
Sent: Thursday, September 9, 2021 7:35 PM
To: Doug Braun <doug351c at gmail.com>
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Clutch master cylinder seal
Is that the CNC brake master? The owners of CNC Brake retired and shut up shop, I recently got a seal kit from Race Ready products, but afraid I don’t have a cross reference to a generic part from the local Auto Parts store.
https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/
Julian
On Sep 9, 2021, at 19:15, Doug Braun <doug351c at gmail.com <mailto:doug351c at gmail.com> > wrote:
Guys,
Is there an off the shelf hydraulic seal that will fit the aluminum
aftermarket Clutch master cylinder (the one with the knurled, round,
aluminum cap). We have a Pantera that's broken down in Richland, WA on
the trip they're on with Panteras NW so then need it quick.
My cross reference only shows seals for the stock clutch master
cylinder.
Doug Braun
Blue 73L #5505
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Thanks Julian!
The site says: "Please Note, these seal kits will not fit early style
CNC master cylinders.
(Call for identifying which CNC style master cylinder style you have)
Have you verified that the seal kit you got, fits your master?
Doug
From: Julian Kift
Sent: Thursday, September 9, 2021 7:35 PM
To: Doug Braun <doug351c at gmail.com>
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Clutch master cylinder seal
Is that the CNC brake master? The owners of CNC Brake retired and shut
up shop, I recently got a seal kit from Race Ready products, but afraid
I don't have a cross reference to a generic part from the local Auto
Parts store.
[1]https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylind
er-seal-kits/
Julian
On Sep 9, 2021, at 19:15, Doug Braun <[2]doug351c at gmail.com> wrote:
Guys,
Is there an off the shelf hydraulic seal that will fit the aluminum
aftermarket Clutch master cylinder (the one with the knurled, round,
aluminum cap). We have a Pantera that's broken down in Richland, WA
on
the trip they're on with Panteras NW so then need it quick.
My cross reference only shows seals for the stock clutch master
cylinder.
Doug Braun
Blue 73L #5505
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
[4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/
2. mailto:doug351c at gmail.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list