[DeTomaso] Clutch master cylinder seal

[GERRY ROMACK]

To All,
My CNC clutch failed about a year after installation. The spring that was used internally was chrome plated. The chrome shattered into little pieces resulting in torn seals and a total blow out of the clutch line to remove particles. I did not reuse the unit.
Gerry
> On 09/09/2021 7:49 PM Doug Braun <doug351c at gmail.com> wrote:
> 
>  
> Thanks Julian!  
> 
>  
> 
> The site says: “Please Note, these seal kits will not fit early style CNC master cylinders.
> (Call for identifying which CNC style master cylinder style you have)
> 
>  
> 
> Have you verified that the seal kit you got, fits your master?
> 
>  
> 
> Doug
> 
>  
> 
> From: Julian Kift 
> Sent: Thursday, September 9, 2021 7:35 PM
> To: Doug Braun <doug351c at gmail.com>
> Cc: detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Clutch master cylinder seal
> 
>  
> 
> Is that the CNC brake master? The owners of CNC Brake retired and shut up shop, I recently got a seal kit from Race Ready products, but afraid I don’t have a cross reference to a generic part from the local Auto Parts store.
> 
>  
> 
> https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/
> 
>  
> 
> Julian
> 
> 
> 
> 
> 
> On Sep 9, 2021, at 19:15, Doug Braun <doug351c at gmail.com <mailto:doug351c at gmail.com> > wrote:
> 
>    Guys,
> 
> 
>   Is there an off the shelf hydraulic seal that will fit the aluminum
>   aftermarket Clutch master cylinder (the one with the knurled, round,
>   aluminum cap).  We have a Pantera that's broken down in Richland, WA on
>   the trip they're on with Panteras NW so then need it quick.
> 
> 
>   My cross reference only shows seals for the stock clutch master
>   cylinder.
> 
> 
>   Doug Braun
> 
>   Blue 73L #5505
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com> 
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> 
>    Thanks Julian!
> 
> 
>    The site says: "Please Note, these seal kits will not fit early style
>    CNC master cylinders.
>    (Call for identifying which CNC style master cylinder style you have)
> 
> 
>    Have you verified that the seal kit you got, fits your master?
> 
> 
>    Doug
> 
> 
>    From: Julian Kift
>    Sent: Thursday, September 9, 2021 7:35 PM
>    To: Doug Braun <doug351c at gmail.com>
>    Cc: detomaso at server.detomasolist.com
>    Subject: Re: [DeTomaso] Clutch master cylinder seal
> 
> 
>    Is that the CNC brake master? The owners of CNC Brake retired and shut
>    up shop, I recently got a seal kit from Race Ready products, but afraid
>    I don't have a cross reference to a generic part from the local Auto
>    Parts store.
> 
> 
>    [1]https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylind
>    er-seal-kits/
> 
> 
>    Julian
> 
>      On Sep 9, 2021, at 19:15, Doug Braun <[2]doug351c at gmail.com> wrote:
> 
>      Guys,
>      Is there an off the shelf hydraulic seal that will fit the aluminum
>      aftermarket Clutch master cylinder (the one with the knurled, round,
>      aluminum cap).  We have a Pantera that's broken down in Richland, WA
>    on
>      the trip they're on with Panteras NW so then need it quick.
>      My cross reference only shows seals for the stock clutch master
>      cylinder.
>      Doug Braun
>      Blue 73L #5505
>    _______________________________________________
>    Detomaso Email List is not managed by POCA
>    Posted emails must not exceed 1.5 Megabytes
>    DeTomaso mailing list
>    [3]DeTomaso at server.detomasolist.com
>    [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>    To manage your subscription (change email address, unsubscribe, etc.)
>    use the links above.
>    Members who post to this list grant license to the list to forward any
>    message posted here to all past, current, or future members of the
>    list. They also grant the list owner permission to maintain an archive
>    or approve the archiving of list messages.
> 
> References
> 
>    1. https://www.racereadyproducts.com/cnc-rebuild-kits/cnc-master-cylinder-seal-kits/
>    2. mailto:doug351c at gmail.com
>    3. mailto:DeTomaso at server.detomasolist.com
>    4. http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.