[DeTomaso] 351C Steel Flywheel for Pantera

[MICHAEL DREW]

Garth,

Standard old Ford 164-tooth with 28.8oz imbalance. 

Mike

Sent from my iPhone

> On Nov 16, 2021, at 07:33, Garth Rodericks via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
>    Drawing on the collective wisdom of the group...
>   What is the correct size flywheel for a 351C flywheel in a Pantera?
>   Diameter & tooth count please.
>   My engine (which swallowed the air cleaner stud a few years ago) has a
>   lightweight crankshaft and an aluminum flywheel and was a little too
>   "herky-jerky" at low rpm speeds through a parking lot or in the
>   neighborhood. Anyway, it's almost ready to go back into the Pantera and
>   I'm thinking of changing to a steel flywheel which weighs in half-way
>   between the aluminum Centerforce flywheel and the OEM cast iron
>   flywheel, but I need to know the correct one to order for a Pantera
>   that fits within the ZF bellhousing.
>   Thanks!
>   Garth
>   #4033
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.