[DeTomaso] Steering Column Slip Joint clips
Mike & Elizabeth
mbefthomas2 at gmail.com
Wed Jun 9 11:29:32 EDT 2021
Steve, do you have a part # or description that I could search with to find a pair? Or, could you send me a pair as well. My column is out for the restoration making the swap very easy.
Thanks
Mike Thomas
From: Steve Liebenow <steven.liebenow at att.net>
Sent: Tuesday, June 8, 2021 7:21 PM
To: Mike & Elizabeth <mbefthomas2 at gmail.com>; Mike Drew <mikeldrew at aol.com>
Cc: Detomaso List <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Steering Column Slip Joint clips
DOH!!!!!
CRS setting in fast, so don't recall if I mailed you a pair already, or if "I was gonna see you soon....." sorta deal.....
I will work on getting you another pair!!!
Here's a picture.......shouldn't help a bit right!!!?
These are found in 19700+++ Ford, Merc's, and Lincolns where ever steering columns are found.....! Probably trucks also with collapsible columns. Pre 1970 the top and bottom shaft pieces were "bonded" with injected nylon plastic of some sort which damped the noise and still allowed things to collapse as
needed.
Cheers!
Steve
On Tuesday, June 8, 2021, 3:25:35 PM PDT, Mike Drew <mikeldrew at aol.com <mailto:mikeldrew at aol.com> > wrote:
Mike,
I wrote a tech article in the August 2020 PCNC newsletter detailing a brilliant fix that Stephane Bergeron in Paris came up with. It works amazingly well and preserves the collapsing feature. I implemented it in my car.
Available here:
http://www.panteraclubnorcal.org/h---previous-pcnc-publications
Although I chose to tap the undersized hole I had drilled, arguably that was extra work and it probably would have worked just as well to drill an oversized hole and just let the threads in the welded nut handle the task.
Subsequent to that, Steve Liebenow found appropriate metal clips from a Mercury (I think) which might also do the job. He was supposed to send some to me many. Moths ago for evaluation—Steve?
Mike
Sent from my iPad
On Jun 8, 2021, at 22:25, Mike & Elizabeth <mbefthomas2 at gmail.com <mailto:mbefthomas2 at gmail.com> > wrote:
I've got the classic minor slop in my slip joint steering column. I
remember years ago comments that the two clips on the inner shaft meant
to keep the two shafts tight are no longer available. Has this changed
and/or what are some solutions you've used to eliminate this movement?
Right now it translates to about 1-2" of free-play at the rim of the
steering wheel, just enough to be annoying. I've measured this by
clamping the lower, outer column in a vice, attaching the wheel and
checking for movement. I need to check the universal joint for
movement as well but I can feel movement where the inner shaft inserts
to the lower shaft.
Welding the shaft is not an option for me as the slip joint is a safety
feature.
Thanks
Mike Thomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Steve, do you have a part # or description that I could search with to
find a pair? Or, could you send me a pair as well. My column is out
for the restoration making the swap very easy.
Thanks
Mike Thomas
From: Steve Liebenow <steven.liebenow at att.net>
Sent: Tuesday, June 8, 2021 7:21 PM
To: Mike & Elizabeth <mbefthomas2 at gmail.com>; Mike Drew
<mikeldrew at aol.com>
Cc: Detomaso List <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Steering Column Slip Joint clips
DOH!!!!!
CRS setting in fast, so don't recall if I mailed you a pair already, or
if "I was gonna see you soon....." sorta deal.....
I will work on getting you another pair!!!
Here's a picture.......shouldn't help a bit right!!!?
These are found in 19700+++ Ford, Merc's, and Lincolns where ever
steering columns are found.....! Probably trucks also with collapsible
columns. Pre 1970 the top and bottom shaft pieces were "bonded" with
injected nylon plastic of some sort which damped the noise and still
allowed things to collapse as
needed.
Cheers!
Steve
On Tuesday, June 8, 2021, 3:25:35 PM PDT, Mike Drew
<[1]mikeldrew at aol.com> wrote:
Mike,
I wrote a tech article in the August 2020 PCNC newsletter detailing a
brilliant fix that Stephane Bergeron in Paris came up with. It works
amazingly well and preserves the collapsing feature. I implemented it
in my car.
Available here:
[2]http://www.panteraclubnorcal.org/h---previous-pcnc-publications
Although I chose to tap the undersized hole I had drilled, arguably
that was extra work and it probably would have worked just as well to
drill an oversized hole and just let the threads in the welded nut
handle the task.
Subsequent to that, Steve Liebenow found appropriate metal clips from a
Mercury (I think) which might also do the job. He was supposed to send
some to me many. Moths ago for evaluation--Steve?
Mike
Sent from my iPad
On Jun 8, 2021, at 22:25, Mike & Elizabeth
<[3]mbefthomas2 at gmail.com> wrote:
I've got the classic minor slop in my slip joint steering column. I
remember years ago comments that the two clips on the inner shaft
meant
to keep the two shafts tight are no longer available. Has this
changed
and/or what are some solutions you've used to eliminate this
movement?
Right now it translates to about 1-2" of free-play at the rim of the
steering wheel, just enough to be annoying. I've measured this by
clamping the lower, outer column in a vice, attaching the wheel and
checking for movement. I need to check the universal joint for
movement as well but I can feel movement where the inner shaft
inserts
to the lower shaft.
Welding the shaft is not an option for me as the slip joint is a
safety
feature.
Thanks
Mike Thomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:mikeldrew at aol.com
2. http://www.panteraclubnorcal.org/h---previous-pcnc-publications
3. mailto:mbefthomas2 at gmail.com
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list