[DeTomaso] "Looseness" between 1st gear vs reverse

[Thomas Törnblom]

 Check that it isn’t just the shifter linkage that is sliding in one of the splines.

Thomas

> 8 dec. 2021 kl. 23:00 skrev Konrad Szwab <kszwab at gmail.com>:
> 
>    So today when driving back from the mechanic (we replaced the brake
>   sensor), by mistake when I downshifted into second gear I did it a bit
>   rough (was going faster than I should and maybe I shouldA have shifted
>   into third).
>   Now when I do reverse there is a bit of play/clack or when I shift from
>   neutral to first gear. If it had a driveshaft or a transmission mount
>   feels like either a loose cardanic joint on the driveshaft or a broken
>   transmission mount.
>   What could I have damaged in my masterful downshifting ? I see no
>   leaks. Some damage to the ZF or maybe a mount or the half shafts ? I
>   drove it up to 100 MPH and all feels fine except for that "looseness"
>   when doing the reverse/1st gear/reverse routine...
>   Thanks,
>   Konrad
> 
> 
> !DSPAM:61b12b0f2437689724155!
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> 
> !DSPAM:61b12b0f2437689724155!