[DeTomaso] Throttle cable

[Larry Stock]

The stock throttle cable does pull the throttle linkage open.

The Jacketed Steel throttle cables don’t really stretch. They can wear,
fatigue and break, but they don’t stretch. Especially if you rotate that
original Tee bracket forwards to move that cable forward to allow for
throttle cable pull on the Holly Carburetor linkage.

That carb bracket Mike showed helps to get the throttle linkage away from
the intake manifold base so it doesn’t interfere and get stuck open like
mine did once doing an Auto Cross, but it doesn’t help so much with the
angle arc pull of the carburetor butterflies.
Larry Stock

On 1/27/19, 1:08 PM, "Paul Rimov" <rimovp at icloud.com> wrote:

> I bought a Lokar universal 10 foot throttle cable and rerouted it around
>and over the bell housing so it was pulling the throttle linkage rather
>than pushing it. Worked fantastically better than the factory set up.
>Much much much better feedback and feel.
>
>> On Jan 27, 2019, at 11:07 AM, Mike Drew via DeTomaso
>><detomaso at server.detomasolist.com> wrote:
>> 
>> Mike,
>> 
>> Yup. Larry’s option is what Lori and I have on our cars. Moving the
>>cable housing forward with his bracket, or moving the carb pickup point
>>rearwards with the carb bracket I pictured, effectively does the same
>>thing. Moving the cable forward increases the angle the cable is forced
>>to bend to go down into the car, so perhaps it’s better to use the
>>bracket mounted on the carb. It’s twice as expensive though, and I have
>>no personal experience with it.
>> 
>> If you have a vac secondary carb, it’s possible you can get away with
>>everything being stock―I don’t know. For sure something needs to be
>>altered if you have mechanical secondaries though.
>> 
>> Mike
>> 
>> Sent from my iPad
>> 
>>> On Jan 27, 2019, at 11:01, Larry Stock <larrys at panteraparts.com> wrote:
>>> 
>>> Do you have the Throttle cable adaptor bracket that goes on the front
>>>bolt
>>> of the intake manifold? It moves the cable forward about 5/8 of an
>>>inch to
>>> match the centerline of the 4 square Holly carb pattern from The
>>>original
>>> equipment spread bore Autolight Carburetor. The original looks like a
>>>Tee
>>> that the throttle cable sheathing is harnessed in a slot and the Holly
>>>one
>>> looks more like an offset L bracket. If you don¹t have the Holly
>>>bracket
>>> you use up and extra 5/8 of an inch of cable and probably will not be
>>> getting full throttle with the butterflies of the Carburetor. We sell
>>> these for $35.00
>>> Larry Stock
>>> 
>>> On 1/26/19, 8:04 PM, "DeTomaso on behalf of Mike McDougal"
>>> <detomaso-bounces at server.detomasolist.com on behalf of
>>> mdmcdougal at gmail.com> wrote:
>>> 
>>>> Looking for recommendations for a throttle cable.A  I have the
>>>>original
>>>> cable stretched to the max. Needs to be a little longer. To fit a
>>>> holley type carb on a blue thunder intake.
>>>> Thanks.A  MikeA
>>>> _______________________________________________
>>>> 
>>>> 
>>>> Detomaso Email List is not managed by POCA
>>>> Posted emails must not exceed 1.5 Megabytes
>>>> DeTomaso mailing list
>>>> DeTomaso at server.detomasolist.com
>>>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>>> 
>>>> To manage your subscription (change email address, unsubscribe, etc.)
>>>>use
>>>> the links above.
>>>> 
>>>> Members who post to this list grant license to the list to forward any
>>>> message posted here to all past, current, or future members of the
>>>>list.
>>>> They also grant the list owner permission to maintain an archive or
>>>> approve the archiving of list messages.
>>> 
>>> 
>>> _______________________________________________
>>> 
>>> 
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> DeTomaso at server.detomasolist.com
>>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>> 
>>> To manage your subscription (change email address, unsubscribe, etc.)
>>>use the links above.
>>> 
>>> Members who post to this list grant license to the list to forward any
>>>message posted here to all past, current, or future members of the
>>>list. They also grant the list owner permission to maintain an archive
>>>or approve the archiving of list messages.
>> 
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.)
>>use the links above.
>> 
>> Members who post to this list grant license to the list to forward any
>>message posted here to all past, current, or future members of the list.
>>They also grant the list owner permission to maintain an archive or
>>approve the archiving of list messages.
>