[DeTomaso] Clutch slave bracket assembly needed
Ken Green
kenn_green at yahoo.com
Fri Oct 26 16:17:41 EDT 2018
I think I have an original and billet aluminum. I can look tonight. It looks like they would be about $200 for the original including shipping. I'd take half that for the original, I can send photos.
I'm going with hydraulic throw-out bearings so don't need them.
Ken
From: MARK CHARLTON <pantera01826 at rogers.com>
To: Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, October 26, 2018 11:04 AM
Subject: [DeTomaso] Clutch slave bracket assembly needed
Hi guys,
I'm trying to assist a fellow owner who needs a near-complete slave
bracket assembly. Before I hound the various vendors, I thought I'd
check here first. The only parts not needed are the actual slave itself
and the lever arm (lower-most part in this photo).
Please let me know what you have and cost including shipping to 13669
(upstate NY). Many thanks!
Mark Charlton
[1]pantera01826 at rogers.com
[cid:E2A1153F-1BE5-4F1E-B8B2-01569C420EA7 at no-dns-available.example.com]
References
1. mailto:pantera01826 at rogers.com
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I think I have an original and billet aluminum. I can look tonight.
It looks like they would be about $200 for the original including
shipping. I'd take half that for the original, I can send photos.
I'm going with hydraulic throw-out bearings so don't need them.
Ken
__________________________________________________________________
From: MARK CHARLTON <pantera01826 at rogers.com>
To: Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, October 26, 2018 11:04 AM
Subject: [DeTomaso] Clutch slave bracket assembly needed
Hi guys,
I'm trying to assist a fellow owner who needs a near-complete slave
bracket assembly. Before I hound the various vendors, I thought I'd
check here first. The only parts not needed are the actual slave
itself
and the lever arm (lower-most part in this photo).
Please let me know what you have and cost including shipping to 13669
(upstate NY). Many thanks!
Mark Charlton
[1][1]pantera01826 at rogers.com
[cid:[2]E2A1153F-1BE5-4F1E-B8B2-01569C420EA7 at no-dns-available.example.c
om]
References
1. mailto:[3]pantera01826 at rogers.com
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:pantera01826 at rogers.com
2. mailto:E2A1153F-1BE5-4F1E-B8B2-01569C420EA7 at no-dns-available.example.com
3. mailto:pantera01826 at rogers.com
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list