[DeTomaso] Help-Window slow to up!!!

Panteratime panteratime at aol.com
Wed Oct 24 18:30:53 EDT 2018


Switch arrived--installed--perfect!  hey- what grease should i use on window rail, rollers etc??   Thanks Guys!!!   


-----Original Message-----
From: Mike Drew <MikeLDrew at aol.com>
To: Panteratime <panteratime at aol.com>
Cc: forestg <forestg at att.net>; detomaso <detomaso at detomasolist.com>
Sent: Sun, Oct 21, 2018 4:36 pm
Subject: Re: [DeTomaso] Help-Window slow to up!!!

Cliff,

Am I to assume you still have the stock original window switches? They are junk and I am surprised they have lasted this long. The new stock replacement switches are even worse!

You definitely want Bosch switches. Here is everything you need to know about them, including a wiring transmogrifier.


Old-school dot matrix printer from the 1980s...but the facts are still the facts. 
Do an eBay search on the window switch part number and you can find them pretty cheaply. 
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F111059074954
Don’t buy just one.  If you are converting your car from stock switches to bosch, they are just slightly different so you need to buy a pair. They are a hair’s width wider, so you will need to carefully file the outside edges of the openings in the instrument panel.
If you already have Bosch switches, yours is the first i have ever hear of that failed. 
Of course, nobody would be selling them if they didn’t fail eventually, would they? :)
Cheers!
Mike

Sent from my iPad


On Oct 21, 2018, at 12:04, Panteratime via DeTomaso <detomaso at server.detomasolist.com> wrote:





  Forest,





  You are right on the money with your assessment of my description.  So


  I will purchase a switch sir--Thanks


  -----Original Message-----


  From: Forest Goodhart <forestg at att.net>


  To: Panteratime <panteratime at aol.com>; detomaso at detomasolist.com


  <detomaso at detomasolist.com>


  Sent: Sat, Oct 20, 2018 7:40 pm


  Subject: Re: [DeTomaso] Help-Window slow to up!!!


  If I read his description correctly he has a separate motor not


  connected to anything that runs as normal in the down direction but is


  slow in the up direction. This indicates some resistance in the


  circuit, most assuredly in the switch. I do not know if the switch can


  be disassembled and contacts cleaned but if it is an original switch I


  would recommend replacing with a Bosh replacement available from most


  vendors or if someone has switched over to the switches from Pantera


  Electronics there may be some good used ones available. For the cost of


  switches I would not mess with it.


  Forest


    __________________________________________________________________





  From: Panteratime via DeTomaso <detomaso at server.detomasolist.com>


  To: detomaso at detomasolist.com


  Sent: Saturday, October 20, 2018 12:54 PM


  Subject: [DeTomaso] Help-Window slow to up!!!


    Folks,


    Window goes down no problem, I detached the wires to the motor and


    wired up a small 12 volt motor to see if its my switch or motor.  The


    new "test" motor whirled great on the down but very slow on the up.


    Can I assume Switch?  I understand the difference from up/down is


    polarity in the switch?  Can the window switch be dissembled and the


    contact cleaned?  If not--Best place to get another switch?  Also


  what


    grease should I grease rails, mechanism,etc..  inside door.  Thanks


    !!


  _______________________________________________


  Detomaso Email List is not managed by POCA


  Posted emails must not exceed 1.5 Megabytes


  DeTomaso mailing list


  DeTomaso at server.detomasolist.com


  http://server.detomasolist.com/mailman/listinfo/detomaso


  To manage your subscription (change email address, unsubscribe, etc.)


  use the links above.


  Members who post to this list grant license to the list to forward any


  message posted here to all past, current, or future members of the


  list. They also grant the list owner permission to maintain an archive


  or approve the archiving of list messages.


_______________________________________________








Detomaso Email List is not managed by POCA


Posted emails must not exceed 1.5 Megabytes


DeTomaso mailing list


DeTomaso at server.detomasolist.com


http://server.detomasolist.com/mailman/listinfo/detomaso





To manage your subscription (change email address, unsubscribe, etc.) use the links above.





Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   Switch arrived--installed--perfect!  hey- what grease should i use on
   window rail, rollers etc??

   Thanks Guys!!!
   -----Original Message-----
   From: Mike Drew <MikeLDrew at aol.com>
   To: Panteratime <panteratime at aol.com>
   Cc: forestg <forestg at att.net>; detomaso <detomaso at detomasolist.com>
   Sent: Sun, Oct 21, 2018 4:36 pm
   Subject: Re: [DeTomaso] Help-Window slow to up!!!
   Cliff,
   Am I to assume you still have the stock original window switches? They
   are junk and I am surprised they have lasted this long. The new stock
   replacement switches are even worse!
   You definitely want Bosch switches. Here is everything you need to know
   about them, including a wiring transmogrifier.
   image1.png
   Old-school dot matrix printer from the 1980s...but the facts are still
   the facts.
   Do an eBay search on the window switch part number and you can find
   them pretty cheaply.
   [1]https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2
   Fulk%2Fitm%2F111059074954
   Donat buy just one.  If you are converting your car from stock switches
   to bosch, they are just slightly different so you need to buy a pair.
   They are a hairas width wider, so you will need to carefully file the
   outside edges of the openings in the instrument panel.
   If you already have Bosch switches, yours is the first i have ever hear
   of that failed.
   Of course, nobody would be selling them if they didnat fail eventually,
   would they? :)
   Cheers!
   Mike
   Sent from my iPad

     On Oct 21, 2018, at 12:04, Panteratime via DeTomaso
     <[2]detomaso at server.detomasolist.com> wrote:

      Forest,

      You are right on the money with your assessment of my description.
      So

      I will purchase a switch sir--Thanks

      -----Original Message-----

      From: Forest Goodhart <[3]forestg at att.net>

      To: Panteratime <[4]panteratime at aol.com>;
     [5]detomaso at detomasolist.com

      <[6]detomaso at detomasolist.com>

      Sent: Sat, Oct 20, 2018 7:40 pm

      Subject: Re: [DeTomaso] Help-Window slow to up!!!

      If I read his description correctly he has a separate motor not

      connected to anything that runs as normal in the down direction but
     is

      slow in the up direction. This indicates some resistance in the

      circuit, most assuredly in the switch. I do not know if the switch
     can

      be disassembled and contacts cleaned but if it is an original
     switch I

      would recommend replacing with a Bosh replacement available from
     most

      vendors or if someone has switched over to the switches from
     Pantera

      Electronics there may be some good used ones available. For the
     cost of

      switches I would not mess with it.

      Forest

        _________________________________________________________________
     _

      From: Panteratime via DeTomaso
     <[7]detomaso at server.detomasolist.com>

      To: [8]detomaso at detomasolist.com

      Sent: Saturday, October 20, 2018 12:54 PM

      Subject: [DeTomaso] Help-Window slow to up!!!

        Folks,

        Window goes down no problem, I detached the wires to the motor
     and

        wired up a small 12 volt motor to see if its my switch or motor.
      The

        new "test" motor whirled great on the down but very slow on the
     up.

        Can I assume Switch?  I understand the difference from up/down is

        polarity in the switch?  Can the window switch be dissembled and
     the

        contact cleaned?  If not--Best place to get another switch?  Also

      what

        grease should I grease rails, mechanism,etc..  inside door.
     Thanks

        !!

      _______________________________________________

      Detomaso Email List is not managed by POCA

      Posted emails must not exceed 1.5 Megabytes

      DeTomaso mailing list

      [9]DeTomaso at server.detomasolist.com

      [10]http://server.detomasolist.com/mailman/listinfo/detomaso

      To manage your subscription (change email address, unsubscribe,
     etc.)

      use the links above.

      Members who post to this list grant license to the list to forward
     any

      message posted here to all past, current, or future members of the

      list. They also grant the list owner permission to maintain an
     archive

      or approve the archiving of list messages.

     _______________________________________________

     Detomaso Email List is not managed by POCA

     Posted emails must not exceed 1.5 Megabytes

     DeTomaso mailing list

     [11]DeTomaso at server.detomasolist.com

     [12]http://server.detomasolist.com/mailman/listinfo/detomaso

     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.

     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F111059074954
   2. mailto:detomaso at server.detomasolist.com
   3. mailto:forestg at att.net
   4. mailto:panteratime at aol.com
   5. mailto:detomaso at detomasolist.com
   6. mailto:detomaso at detomasolist.com
   7. mailto:detomaso at server.detomasolist.com
   8. mailto:detomaso at detomasolist.com
   9. mailto:DeTomaso at server.detomasolist.com
  10. http://server.detomasolist.com/mailman/listinfo/detomaso
  11. mailto:DeTomaso at server.detomasolist.com
  12. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.png
Type: image/png
Size: 443941 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20181024/df4b0816/attachment.png>


More information about the DeTomaso mailing list