[DeTomaso] converting to factory ZF side mounts
Espen Graffer
espeng at getmail.no
Wed May 30 01:51:18 EDT 2018
Thanks, that’s an interesting input!
If this is the reason for changing from rearmount to the stronger sidemount solution, I must reconsider my opinion. I thought they changed only because the rear casing bolts broke.
Anyone else has knowledge about this?
espen in norway
From: Rob Dumoulin [mailto:rob at dumoulins.net]
Sent: 29. mai 2018 18:40
To: Ken Green
Cc: espeng at getmail.no; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] converting to factory ZF side mounts
When I got 1488, the rear condenser was removed, so I ordered a complete fan, shroud, and condenser from a vendor. When I went to install it, I found the rear mounts for the ZF were in the way of a proper fit. The vendor mentioned that I would need to update the mounts to side mounts and that by doing so would also help eliminate clutch chatter. I would tell you which vendor it was, but to be honest, I do not remember for sure which one of two and I do not want to give false information.
Rob DuMoulin
904.476.8744
rob at dumoulins.net
www.kbsi.co
<http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58> http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
On Sun, May 27, 2018 at 11:12 AM, Ken Green via DeTomaso <detomaso at server.detomasolist.com> wrote:
Maybe the two side mounts add some chassis stiffening?
Ken
__________________________________________________________________
-------------- next part --------------
Thanks, that's an interesting input!
If this is the reason for changing from rearmount to the stronger
sidemount solution, I must reconsider my opinion. I thought they
changed only because the rear casing bolts broke.
Anyone else has knowledge about this?
espen in norway
From: Rob Dumoulin [mailto:rob at dumoulins.net]
Sent: 29. mai 2018 18:40
To: Ken Green
Cc: espeng at getmail.no; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] converting to factory ZF side mounts
When I got 1488, the rear condenser was removed, so I ordered a
complete fan, shroud, and condenser from a vendor. When I went to
install it, I found the rear mounts for the ZF were in the way of a
proper fit. The vendor mentioned that I would need to update the
mounts to side mounts and that by doing so would also help eliminate
clutch chatter. I would tell you which vendor it was, but to be
honest, I do not remember for sure which one of two and I do not want
to give false information.
Rob DuMoulin
904.476.8744
[1]rob at dumoulins.net
[2]www.kbsi.co
[3]http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
On Sun, May 27, 2018 at 11:12 AM, Ken Green via DeTomaso
<[4]detomaso at server.detomasolist.com> wrote:
Maybe the two side mounts add some chassis stiffening?
Ken
__________________________________________________________________
References
1. mailto:rob at dumoulins.net
2. http://www.kbsi.co/
3. http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
4. mailto:detomaso at server.detomasolist.com
More information about the DeTomaso
mailing list