[DeTomaso] converting to factory ZF side mounts
Rob Dumoulin
rob at dumoulins.net
Tue May 29 12:40:07 EDT 2018
When I got 1488, the rear condenser was removed, so I ordered a complete
fan, shroud, and condenser from a vendor. When I went to install it, I
found the rear mounts for the ZF were in the way of a proper fit. The
vendor mentioned that I would need to update the mounts to side mounts and
that by doing so would also help eliminate clutch chatter. I would tell
you which vendor it was, but to be honest, I do not remember for sure which
one of two and I do not want to give false information.
Rob DuMoulin
904.476.8744
rob at dumoulins.net
www.kbsi.co
http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
On Sun, May 27, 2018 at 11:12 AM, Ken Green via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Maybe the two side mounts add some chassis stiffening?
> Ken
> __________________________________________________________________
>
> From: "espeng at getmail.no" <espeng at getmail.no>
> To: detomaso at server.detomasolist.com
> Cc: espeng at getmail.no
> Sent: Saturday, May 26, 2018 10:39 PM
> Subject: Re: [DeTomaso] converting to factory ZF side mounts
> Ahh, I see. That makes sense.
> Normally there is no need for A/C here in Norway, so mine is removed.
> Espen
> ----- Opprinnelig melding -----
> Espen,
> Yes, the rear mount is likely more than sufficient.
> In my case, however, an upgraded air conditioning condenser required me
> to abandon the rear mount and I have been using another side mount
> supplied by a vendor.
> I just wanted something that looked a little bit nicer, and as most
> other owners, I am cursed with the constant need to change and upgrade
> my car. ;-)
> Larry
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. mailto:DeTomaso at server.detomasolist.com
> 2. http://server.detomasolist.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
-------------- next part --------------
When I got 1488, the rear condenser was removed, so I ordered a
complete fan, shroud, and condenser from a vendor.A When I went to
install it, I found the rear mounts for the ZF were in the way of a
proper fit.A The vendor mentioned that I would need to update the
mounts to side mounts and that by doing so would also help eliminate
clutch chatter.A I would tell you which vendor it was, but to be
honest, I do not remember for sure which one of two and I do not want
to give false information.
Rob DuMoulin
904.476.8744
[1]rob at dumoulins.net
[2]www.kbsi.co
[3]http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
On Sun, May 27, 2018 at 11:12 AM, Ken Green via DeTomaso
<[4]detomaso at server.detomasolist.com> wrote:
A A Maybe the two side mounts add some chassis stiffening?
A A Ken
A A A ____________________________________________________________
______
A A From: "[5]espeng at getmail.no" <[6]espeng at getmail.no>
A A To: [7]detomaso at server.detomasolist.com
A A Cc: [8]espeng at getmail.no
A A Sent: Saturday, May 26, 2018 10:39 PM
A A Subject: Re: [DeTomaso] converting to factory ZF side mounts
A A Ahh, I see. That makes sense.
A A Normally there is no need for A/C here in Norway, so mine is
removed.
A A Espen
A A ----- Opprinnelig melding -----
A A Espen,
A A Yes, the rear mount is likely more than sufficient.
A A In my case, however, an upgraded air conditioning condenser
required me
A A to abandon the rear mount and I have been using another side
mount
A A supplied by a vendor.
A A I just wanted something that looked a little bit nicer, and as
most
A A other owners, I am cursed with the constant need to change and
upgrade
A A my car. ;-)
A A Larry
A A _______________________________________________
A A Detomaso Email List is not managed by POCA
A A Posted emails must not exceed 1.5 Megabytes
A A DeTomaso mailing list
A A [1][9]DeTomaso at server.detomasolist.com
A A [2][10]http://server.detomasolist.com/mailman/listinfo/detomaso
A A To manage your subscription (change email address, unsubscribe,
etc.)
A A use the links above.
A A Members who post to this list grant license to the list to
forward any
A A message posted here to all past, current, or future members of
the
A A list. They also grant the list owner permission to maintain an
archive
A A or approve the archiving of list messages.
References
A A 1. mailto:[11]DeTomaso at server.detomasolist.com
A A 2. [12]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[13]DeTomaso at server.detomasolist.com
[14]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:rob at dumoulins.net
2. http://www.kbsi.co/
3. http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
4. mailto:detomaso at server.detomasolist.com
5. mailto:espeng at getmail.no
6. mailto:espeng at getmail.no
7. mailto:detomaso at server.detomasolist.com
8. mailto:espeng at getmail.no
9. mailto:DeTomaso at server.detomasolist.com
10. http://server.detomasolist.com/mailman/listinfo/detomaso
11. mailto:DeTomaso at server.detomasolist.com
12. http://server.detomasolist.com/mailman/listinfo/detomaso
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list