[DeTomaso] Port matching heads to headers?
Julian Kift
julian_kift at hotmail.com
Thu Mar 22 17:56:53 EDT 2018
"And my engine builder posed a question I do not know how to answer" A: you picked the wrong engine builder!
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, March 22, 2018 1:08 PM
To: Email List Address For Posting
Subject: [DeTomaso] Port matching heads to headers?
All,
Slowly, much like the repairs to 2511, my engine is being assembled, and my engine builder posed a question I do not know how to answer.
I am using the 4-barrel CHI heads and blue thunder intake, 404 stroker, GTS tri-y headers.
Exhaust ports on my heads are not CNC machined but remain as cast.
Question:
What sort of heads to headers port matching should be done?
None? Match to gasket? Or???
Any wisdom you can provide is appreciated.
Thanks,
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
"And my engine builder posed a question I do not know how to answer"
A: you picked the wrong engine builder!
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, March 22, 2018 1:08 PM
To: Email List Address For Posting
Subject: [DeTomaso] Port matching heads to headers?
All,
Slowly, much like the repairs to 2511, my engine is being assembled,
and my engine builder posed a question I do not know how to answer.
I am using the 4-barrel CHI heads and blue thunder intake, 404 stroker,
GTS tri-y headers.
Exhaust ports on my heads are not CNC machined but remain as cast.
Question:
What sort of heads to headers port matching should be done?
None? Match to gasket? Or???
Any wisdom you can provide is appreciated.
Thanks,
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list