[DeTomaso] Fuel sending unit float
Larry Stock
larrys at panteraparts.com
Sun Feb 4 16:22:07 EST 2018
The Plastics used for the floats are permeable. I put them in my lab oven
at about 125F for a few days and they dry back out.
Larry
On 2/4/18, 1:05 PM, "detomaso-bounces at server.detomasolist.com on behalf of
9johnnypat9 at earthlink.net" <detomaso-bounces at server.detomasolist.com on
behalf of 9johnnypat9 at earthlink.net> wrote:
> I'm sure I could but why make a project out of it. Gas today is so
> corrosive anything plastic available to me questionable to last. Fuel
> tank sealants are hit and miss. I previously fixed a pinhole in this
> float several years ago using a very expensive sealant designed for
> USAF wet wing jets. After time all sealants will yield. The Fiat x19
> float will work but I can't seem to find one. One of the vendors must
> sell these things.
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.
More information about the DeTomaso
mailing list