[DeTomaso] FW: 3rd gear?

Joseph F. Byrd, Jr. byrdjf at embarqmail.com
Sat Apr 14 15:47:57 EDT 2018


No experience, just thinking of how linkage works....

If the linkage has loose play, I would expect the shifter lever is hitting the gate and not pushing the transaxle rod far enough.

I have never gotten the values for the Pantera's ZF shifter throws but I have barely legable notes that shows 3rd needs the farthest throw

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf Of Tom Shinrock via DeTomaso
Sent: Saturday, April 14, 2018 14:01 PM
To: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] 3rd gear?

Not sure how relevant it may be to the ZF, but I had a 280Z back in 1979 that I went to shift into 5th and the gear was gone.  I was on a trip back home about 2 hours out when the gear just disappeared.  I shifted into 4th and everything was fine and drove it home.


I took it into the dealer the next day and they told me a nut had backed off and caused the gear to get misaligned.  No damage was done to the tranny.


Tom
5186



-----Original Message-----
From: Rob Dumoulin <rob at dumoulins.net>
To: Ken Green <kenn_green at yahoo.com>
Cc: P - Mail List <detomaso at server.detomasolist.com>
Sent: Sat, Apr 14, 2018 6:59 am
Subject: Re: [DeTomaso] 3rd gear?

That is what I hope also. Has anybody lost a gear before where it
   freely goes into gear but the gear is just not there?

   On Fri, Apr 13, 2018, 11:36 PM Ken Green <[1]kenn_green at yahoo.com>
   wrote:

   Messed up linkage?A  Can at least hope that's it.
   Ken
     __________________________________________________________________

   From: Rob Dumoulin <[2]rob at dumoulins.net>
   To: P - Mail List <[3]detomaso at server.detomasolist.com>
   Sent: Friday, April 13, 2018 8:06 PM
 Subject: [DeTomaso] 3rd gear?
   A  I took the Pantera for a drive today after it had been sitting idle
   for
   A  a few months. Crime, I know, but life happens. Third gear is gone.
   Iean
   A  not even there anymore. There is a very slight grind resistance half
   A  way through the shift gate into 3rd, but nothing major. 4th gear
   A  occasionally puts tranny in 2nd instead which did not happen before,
   A  but all other gears seem to be aligned as usual.A
   A  Thoughts?
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [4]DeTomaso at server.detomasolist.com
   [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:kenn_green at yahoo.com
   2. mailto:rob at dumoulins.net
   3. mailto:detomaso at server.detomasolist.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________


Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SHIFT.bmp
Type: image/bmp
Size: 90118 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20180414/49fd1ee8/attachment.bmp>


More information about the DeTomaso mailing list