[DeTomaso] Fwd: Re: Pedal Casting?

[Dave Londry]

Well ... Now I **have** to get that sintering 3D printer.

Seriously though, I have been watching prices.
Dave


On 4/02/17 8:26 PM, ehpantera wrote:
> Yes.
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
> -------- Original message --------
> From: Dave Londry <davel at emspace.com>
> Date: 4/2/17 9:17 PM (GMT-05:00)
> To: detomasolist <detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Fwd: Re:  Pedal Casting?
>
> Hey wait a minute - you have an NC mill in your basement?
> Dave
>
>
>
> -------- Forwarded Message --------
> Subject: Re: [DeTomaso] Pedal Casting?
> Date: Sun, 2 Apr 2017 03:59:04 +0000 (UTC)
> From: mark skwarek <ehpantera at yahoo.com>
> Reply-To: mark skwarek <ehpantera at yahoo.com>
> To: Scott Bell <scott at saccrestorations.net>, 'Ken Green'
> <kenn_green at yahoo.com>, 'L GRAY' <tipo874a at msn.com>, 'Dave Londry'
> <davel at emspace.com>
> CC: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
>
>
>
> I used Wilwood pedal assy. mounted to an AL plate with the MC being
> raised from the traditional position in the Pantera so that the manual
> pedals are located in the same position as stock pedals. I milled new
> pedals out of billet AL as I did not want to take the chance of welded
> pedal failing at a bad time.
> Mark
>
>
> On Saturday, April 1, 2017 11:24 PM, Scott Bell
> <scott at saccrestorations.net> wrote:
>
>
> No denting of side of trunk required!
>
>
>
>

-- 
Dave Londry
Embedded Spaces Inc. (ESI)
davel at emspace.com

904 429 1937 (SkypeCall FLA)
Skype:embeddedspaces
Canada Numbers
604 721 2278 (cell)
604 589 9182 (shop line)
604 589 9183 (home line)

-------------- next part --------------
   Well ... Now I **have** to get that sintering 3D printer.

   Seriously though, I have been watching prices.
   Dave

   On 4/02/17 8:26 PM, ehpantera wrote:

   Yes.

   Sent from my Verizon, Samsung Galaxy smartphone

   -------- Original message --------
   From: Dave Londry [1]<davel at emspace.com>
   Date: 4/2/17 9:17 PM (GMT-05:00)
   To: detomasolist [2]<detomaso at server.detomasolist.com>
   Subject: [DeTomaso] Fwd: Re:  Pedal Casting?

   Hey wait a minute - you have an NC mill in your basement?
   Dave
   -------- Forwarded Message --------
   Subject: Re: [DeTomaso] Pedal Casting?
   Date: Sun, 2 Apr 2017 03:59:04 +0000 (UTC)
   From: mark skwarek [3]<ehpantera at yahoo.com>
   Reply-To: mark skwarek [4]<ehpantera at yahoo.com>
   To: Scott Bell [5]<scott at saccrestorations.net>, 'Ken Green'
   [6]<kenn_green at yahoo.com>, 'L GRAY' [7]<tipo874a at msn.com>, 'Dave
   Londry'
   [8]<davel at emspace.com>
   CC: [9]detomaso at server.detomasolist.com
   [10]<detomaso at server.detomasolist.com>
   I used Wilwood pedal assy. mounted to an AL plate with the MC being
   raised from the traditional position in the Pantera so that the manual
   pedals are located in the same position as stock pedals. I milled new
   pedals out of billet AL as I did not want to take the chance of welded
   pedal failing at a bad time.
   Mark
   On Saturday, April 1, 2017 11:24 PM, Scott Bell
   [11]<scott at saccrestorations.net> wrote:
   No denting of side of trunk required!
--
Dave Londry
Embedded Spaces Inc. (ESI)
[12]davel at emspace.com

904 429 1937 (SkypeCall FLA)
[13]Skype:embeddedspaces
Canada Numbers
604 721 2278 (cell)
604 589 9182 (shop line)
604 589 9183 (home line)

References

   1. mailto:davel at emspace.com
   2. mailto:detomaso at server.detomasolist.com
   3. mailto:ehpantera at yahoo.com
   4. mailto:ehpantera at yahoo.com
   5. mailto:scott at saccrestorations.net
   6. mailto:kenn_green at yahoo.com
   7. mailto:tipo874a at msn.com
   8. mailto:davel at emspace.com
   9. mailto:detomaso at server.detomasolist.com
  10. mailto:detomaso at server.detomasolist.com
  11. mailto:scott at saccrestorations.net
  12. mailto:davel at emspace.com
  13. Skype:embeddedspaces