[DeTomaso] Fwd: Re: Pedal Casting?

[ehpantera]

Yes. 


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Dave Londry <davel at emspace.com> Date: 4/2/17  9:17 PM  (GMT-05:00) To: detomasolist <detomaso at server.detomasolist.com> Subject: [DeTomaso] Fwd: Re:  Pedal Casting? 
Hey wait a minute - you have an NC mill in your basement?
Dave



-------- Forwarded Message --------
Subject: 	Re: [DeTomaso] Pedal Casting?
Date: 	Sun, 2 Apr 2017 03:59:04 +0000 (UTC)
From: 	mark skwarek <ehpantera at yahoo.com>
Reply-To: 	mark skwarek <ehpantera at yahoo.com>
To: 	Scott Bell <scott at saccrestorations.net>, 'Ken Green' 
<kenn_green at yahoo.com>, 'L GRAY' <tipo874a at msn.com>, 'Dave Londry' 
<davel at emspace.com>
CC: 	detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>



I used Wilwood pedal assy. mounted to an AL plate with the MC being 
raised from the traditional position in the Pantera so that the manual 
pedals are located in the same position as stock pedals. I milled new 
pedals out of billet AL as I did not want to take the chance of welded 
pedal failing at a bad time.
Mark


On Saturday, April 1, 2017 11:24 PM, Scott Bell 
<scott at saccrestorations.net> wrote:


No denting of side of trunk required!




-------------- next part --------------
   Yes.

   Sent from my Verizon, Samsung Galaxy smartphone

   -------- Original message --------
   From: Dave Londry <davel at emspace.com>
   Date: 4/2/17 9:17 PM (GMT-05:00)
   To: detomasolist <detomaso at server.detomasolist.com>
   Subject: [DeTomaso] Fwd: Re:  Pedal Casting?

   Hey wait a minute - you have an NC mill in your basement?
   Dave
   -------- Forwarded Message --------
   Subject: Re: [DeTomaso] Pedal Casting?
   Date: Sun, 2 Apr 2017 03:59:04 +0000 (UTC)
   From: mark skwarek <ehpantera at yahoo.com>
   Reply-To: mark skwarek <ehpantera at yahoo.com>
   To: Scott Bell <scott at saccrestorations.net>, 'Ken Green'
   <kenn_green at yahoo.com>, 'L GRAY' <tipo874a at msn.com>, 'Dave Londry'
   <davel at emspace.com>
   CC: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
   I used Wilwood pedal assy. mounted to an AL plate with the MC being
   raised from the traditional position in the Pantera so that the manual
   pedals are located in the same position as stock pedals. I milled new
   pedals out of billet AL as I did not want to take the chance of welded
   pedal failing at a bad time.
   Mark
   On Saturday, April 1, 2017 11:24 PM, Scott Bell
   <scott at saccrestorations.net> wrote:
   No denting of side of trunk required!