[DeTomaso] DeTomaso Digest, Vol 147, Issue 19
Thomas Törnblom
tipo874 at gmail.com
Mon Sep 19 10:07:36 EDT 2016
Checking the service manual I see that the return line to the water pump
is connected to the top, and this is how it has always been connected on
my car.
Personally I think it makes sense to have it connected to the bottom for
at least two reasons:
1) The coolant is at least in theory cooler at the bottom
2) It will supply coolant longer if there is a leak.
Not sure how easy it would be to reverse the lines on my car. The lines
would have to cross each other.
Thomas
Den 2016-09-19 kl. 15:46, skrev Jerry Knotts:
> When I bought my first Pantera in 2000 I had a heating problem at the
> track. When It would puke about 1/2 gal of coolant it would overheat
> and was hell to try and keep cool. It would sometimes suck the full
> puke tank back in as it cooled and work for a few laps then overheat
> again. I would refill the unit belch it at the radiator and it would
> work again for a while.
> After a couple of disappointing track days, I was under the car and
> followed the radiator lines forward. The engine return was routed from
> the top of the radiator. I found that when the car was rebuilt some
> years before they had replaced the radiator with a "Chevy" style
> radiator which had the lines reversed. My engine return was from the
> top of the radiator and the engine hot was going to the bottom of the
> radiator. Rearranged different radiator hook up hoses and it has been
> fine since.
> Sometimes the obvious isn't
> jerry knotts
> On 9/17/2016 9:56 AM, Julian Kift wrote:
>
> It's great to hear that you now have a functioning cooling system,
> although I have to wonder which of the particular changes contributed
> most, I suspect the thermostat housing being blocked off was a bulk of
> the problem.
>
> I had a similar experience when I got my first Pantera, it overheated
> in traffic, so I jumped on the web found all these articles about
> swapping radiators and fans etc. and duly went and purchased a setup.
> When I got to going through the car checking the thermostat I found it
> was a Windsor style, I swapped it for the correct Cleveland t-stat and
> voila heating issues resolved.
>
> It's just a reminder to check the simple stuff prior to laying out big
> $$$, even now I think there are still a lot of myths' perpetuated about
> these cars... like someone once said "why let the truth get in the way
> of a good story"
>
> Julian
> __________________________________________________________________
>
> From: DeTomaso [1]<detomaso-bounces at server.detomasolist.com> on behalf of
> Owen Cooke [2]<owen at tadhgcooke.com>
> Sent: Saturday, September 17, 2016 2:19 AM
> To: [3]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 19
>
> guys
> i had overheating problems
> i put in a new hall brass rad but my car had bleed pipe from the rad
> back to the swirl tank and no fitting in halls rad for it apart from a
> top bleed screw
> so i made a junction to fit the original bleed screw and the bleed pipe
> to it
> then new mariah (is that the right name) that fir on the stock
> brackets
> and wired them directly from the battery to the relays
> i found the hole under the thermostat was blocked with solder
> i removed that and fitted a new stat
> now all is perfect temp wise - warms up steady and holds the 90c or
> 195f in all conditions
> my gauge with sender in block beside the pump/stat ready 150f but its
> steady and i know what to expect
> very happy with result
> owen cooke
> On 16/09/2016 23:31, [4]detomaso-request at server.detomasolist.com wrote:
> > Send DeTomaso mailing list submissions to
> > [5]detomaso at server.detomasolist.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > [1][6]http://server.detomasolist.com/mailman/listinfo/detomaso
> [2]DeTomaso Info Page
> server.detomasolist.com
> This is the DeTomaso mailing list, a free and open forum for the
> discussion of issues surrounding all DeTomaso automobiles. This is an
> unmoderated mailing list ...
> > or, via email, send a message with subject or body 'help' to
> > [7]detomaso-request at server.detomasolist.com
> >
> > You can reach the person managing the list at
> > [8]detomaso-owner at server.detomasolist.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of DeTomaso digest..."
> >
> >
> > Daily Detomaso List Digest
> >
> > Today's Topics:
> >
> > 1. Fans and shroud (Jack Donahue)
> > 2. Re: Fans and shroud (Himes, Terry (397C))
> > 3. Tires for Grp IV Flared Car (MyCars)
> > 4. Re: Tires for Grp IV Flared Car (LSJ)
> > 5. Re: Fans and shroud (Jack Donahue)
> > 6. Re: Fans and shroud (Jack Donahue)
> > 7. Re: Fans and shroud (Larry Stock)
> > 8. McLeod hydraulic throw out (Cullen McCann)
> > 9. Re: Fans and shroud (Ken Green)
> > 10. McLeod hydraulic throw out (Larry Finch)
> > 11. Re: Tires for Grp IV Flared Car (MyCars)
> > 12. Re: Tires for Grp IV Flared Car (MyCars)
> > 13. Re: McLeod hydraulic throw out (Will Kooiman)
> > 14. Re: McLeod hydraulic throw out (Cullen McCann)
> > 15. Re: McLeod hydraulic throw out (Larry Stock)
> > 16. Re: Sanden Compressors noises (Mike Drew)
> > 17. Re: Sanden Compressors noises (Julian Kift)
> > 18. Re: Sanden Compressors noises (Mike Drew)
> > 19. Re: McLeod hydraulic throw out (Larry Finch)
> > 20. Re: McLeod hydraulic throw out (Cullen McCann)
> > 21. NPC, Need transmission suggestions (michael frazier)
> > 22. Re: Sanden Compressors noises (David Nunn)
> > 23. Re: NPC, Need transmission suggestions (bill)
> > 24. Re: Sanden Compressors noises (bill)
> >
> >
> >
> ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 16 Sep 2016 09:29:46 -0700
> > From: Jack Donahue [9]<demongusta at gmail.com>
> > To: [10]"detomaso at server.detomasolist.com"
> > [11]<detomaso at server.detomasolist.com>
> > Cc: [12]"detomaso at server.detomasolist.com"
> > [13]<detomaso at server.detomasolist.com>
> > Subject: [DeTomaso] Fans and shroud
> > Message-ID: [14]<CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Hey all - A few weeks ago I was talking asking The List about
> radiators - all said-and-done, I decided on the Hall radiator, since I
> wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
> admit it?s because I want to, not necessarily NEED to. It ain?t broke,
> but I am fixing it(?). Didn?t want to admit that, but...Lol. There
> really is an ulterior motive, but I just don?t want to mention it right
> now; but I ran my idea past Brassworks - who says they will
> ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> > Now - fans. I really don?t know the brand name of my fans, but they
> are suckers - about 12? diameter - and the blades are ?curved? -
> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
> since they said they can be - or are - mounted in a shroud that is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal for
> me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 16 Sep 2016 16:54:05 +0000
> > From: "Himes, Terry (397C)" [15]<terry.himes at jpl.nasa.gov>
> > To: Jack Donahue [16]<demongusta at gmail.com>,
> > [17]"detomaso at server.detomasolist.com"
> [18]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Fans and shroud
> > Message-ID: [19]<D4016E9F.92F3B%thimes at jpl.nasa.gov>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Jack,
> >
> > Good stuff. I too am running the original radiator with new fans.
> I'm not going to change it
> > now but I will follow your progress. Someday I will have to deal
> with it. So keep posting and
> > I will keep saving the responses. ;-)
> >
> > Terry
> >
> >
> >
> > "A Purple Heart proves you were smart enough to hatch a plan,
> > stupid enough to try it and lucky enough to survive!"
> >
> > Terry W. Himes
> > JPL Jet Propulsion Laboratory
> > Dawn Spacecraft Team
> > Rosetta Sequence Team Lead
> > Phone: (818) 393-6261
> > Cell: (818) 653-8213
> > Fax: (818) 393-3147
> > [20]thimes at jpl.nasa.gov<[3][21]mailto:thimes at jpl.nasa.gov>
> > ??
> >
> > From: DeTomaso
> <[22]detomaso-bounces at server.detomasolist.com[23]<mailto:detomaso-bounces at ser
> ve
> r.detomasolist.com>> on behalf of Jack Donahue
> <[24]demongusta at gmail.com[25]<mailto:demongusta at gmail.com>>
> > Date: Friday, September 16, 2016 9:29 AM
> > To:
> "[26]detomaso at server.detomasolist.com[27]<mailto:detomaso at server.detomasolist
> .c
> om>"
> <[28]detomaso at server.detomasolist.com[29]<mailto:detomaso at server.detomasolist
> .c
> om>>
> > Cc:
> "[30]detomaso at server.detomasolist.com[31]<mailto:detomaso at server.detomasolist
> .c
> om>"
> <[32]detomaso at server.detomasolist.com[33]<mailto:detomaso at server.detomasolist
> .c
> om>>
> > Subject: [DeTomaso] Fans and shroud
> >
> > Hey all - A few weeks ago I was talking asking The List about
> radiators - all said-and-done, I decided on the Hall radiator, since I
> wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
> admit it?s because I want to, not necessarily NEED to. It ain?t broke,
> but I am fixing it(?). Didn?t want to admit that, but...Lol. There
> really is an ulterior motive, but I just don?t want to mention it right
> now; but I ran my idea past Brassworks - who says they will
> ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> > Now - fans. I really don?t know the brand name of my fans, but they
> are suckers - about 12? diameter - and the blades are ?curved? -
> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
> since they said they can be - or are - mounted in a shroud that is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal for
> me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> >
> [34]DeTomaso at server.detomasolist.com[35]<mailto:DeTomaso at server.detomasolist.
> co
> m>
> > [4][36]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > Jack,
> > Good stuff. I too am running the original radiator with new
> fans. I'm
> > not going to change it
> > now but I will follow your progress. Someday I will have to deal
> with
> > it. So keep posting and
> > I will keep saving the responses. ;-)
> > Terry
> >
> > "A Purple Heart proves you were smart enough to hatch a plan,
> >
> > stupid enough to try it and lucky enough to survive!"
> >
> > Terry W. Himes
> >
> > JPL Jet Propulsion Laboratory
> >
> > Dawn Spacecraft Team
> >
> > Rosetta Sequence Team Lead
> >
> > Phone: (818) 393-6261
> >
> > Cell: (818) 653-8213
> >
> > Fax: (818) 393-3147
> >
> > [[37]1]thimes at jpl.nasa.gov
> >
> > From: DeTomaso [38]<[2]detomaso-bounces at server.detomasolist.com> on
> behalf
> > of Jack Donahue [39]<[3]demongusta at gmail.com>
> > Date: Friday, September 16, 2016 9:29 AM
> > To: [40]"[4]detomaso at server.detomasolist.com"
> > [41]<[5]detomaso at server.detomasolist.com>
> > Cc: [42]"[6]detomaso at server.detomasolist.com"
> > [43]<[7]detomaso at server.detomasolist.com>
> > Subject: [DeTomaso] Fans and shroud
> >
> > Hey all - A few weeks ago I was talking asking The List
> > about radiators - all said-and-done, I decided on the Hall
> radiator,
> > since I wanted brass/copper instead of aluminum. And, yes Mike
> Drew, I
> > have to admit it's because I want to, not necessarily NEED to. It
> ain't
> > broke, but I am fixing it(?). Didn't want to admit that,
> but...Lol.
> > There really is an ulterior motive, but I just don't want to
> mention it
> > right now; but I ran my idea past Brassworks - who says they
> will
> > "build-to-suit" - but the Hall unit looks to be
> "tried-and-proven".
> > Now - fans. I really don't know the brand name of my fans, but
> they are
> > suckers - about 12" diameter - and the blades are "curved" -
> > sickle-shaped. The names that been bouncing around are Mariah,
> SPAL,
> > and Flex-a-lite. I had read someone's post about the
> Flex-a-lite's
> > since they said they can be - or are - mounted in a shroud that
> is a
> > perfect match for the Pantera radiator size. I think. And someone
> > offered-up a part number, but I deleted (or lost) it. All normal
> for
> > me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[44]8]DeTomaso at server.detomasolist.com
> > [9][45]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [5][46]mailto:thimes at jpl.nasa.gov
> > 2. [6][47]mailto:detomaso-bounces at server.detomasolist.com
> > 3. [7][48]mailto:demongusta at gmail.com
> > 4. [8][49]mailto:detomaso at server.detomasolist.com
> > 5. [9][50]mailto:detomaso at server.detomasolist.com
> > 6. [10][51]mailto:detomaso at server.detomasolist.com
> > 7. [11][52]mailto:detomaso at server.detomasolist.com
> > 8. [12][53]mailto:DeTomaso at server.detomasolist.com
> > 9. [13][54]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Fri, 16 Sep 2016 10:03:20 -0700
> > From: MyCars [55]<mycars at comcast.net>
> > To: [56]detomaso at server.detomasolist.com
> > Subject: [DeTomaso] Tires for Grp IV Flared Car
> > Message-ID: [57]<6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
> the
> > rear and wondering what would be a good match for the front.
> >
> > I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
> give
> > the car a bit of rake, but what would the handling be like?
> >
> > Thanks in advance for your thoughts
> >
> > Roy
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Fri, 16 Sep 2016 17:08:50 +0000 (UTC)
> > From: LSJ [58]<lashdeep at yahoo.com>
> > To: MyCars [59]<mycars at comcast.net>, [60]"detomaso at server.detomasolist.com
> "
> > [61]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> > Message-ID: [62]<1287234121.1004140.1474045730621 at mail.yahoo.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > What size wheel up front?
> > ?LSJ
> >
> > central wines-spirits?? est 1934
> >
> > 625 e street nw
> > washington, dc 20004
> > centralwines.com
> >
> > facebook.com/CentralLiquors
> >
> > 202-737-2800
> >
> >
> >
> > From: MyCars [63]<mycars at comcast.net>
> > To: [64]detomaso at server.detomasolist.com
> > Sent: Friday, September 16, 2016 1:03 PM
> > Subject: [DeTomaso] Tires for Grp IV Flared Car
> >
> > I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
> the
> > rear and wondering what would be a good match for the front.
> >
> > I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
> give
> > the car a bit of rake, but what would the handling be like?
> >
> > Thanks in advance for your thoughts
> >
> > Roy
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [65]DeTomaso at server.detomasolist.com
> > [14][66]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> >
> >
> >
> > -------------- next part --------------
> > What size wheel up front?
> >
> > LSJ
> > central
> > wines-spirits est 1934
> > 625 e street nw
> > washington, dc 20004
> > [1]centralwines.com
> > [2]facebook.com/CentralLiquors
> > 202-737-2800
> >
> __________________________________________________________________
> >
> > From: MyCars [67]<mycars at comcast.net>
> > To: [68]detomaso at server.detomasolist.com
> > Sent: Friday, September 16, 2016 1:03 PM
> > Subject: [DeTomaso] Tires for Grp IV Flared Car
> > I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
> for the
> > rear and wondering what would be a good match for the front.
> > I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
> would
> > give
> > the car a bit of rake, but what would the handling be like?
> > Thanks in advance for your thoughts
> > Roy
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[69]3]DeTomaso at server.detomasolist.com
> > [4][70]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [15][71]http://centralwines.com/
> > 2. [16][72]http://facebook.com/CentralLiquors
> > 3. [17][73]mailto:DeTomaso at server.detomasolist.com
> > 4. [18][74]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Fri, 16 Sep 2016 10:13:05 -0700
> > From: Jack Donahue [75]<demongusta at gmail.com>
> > To: "Himes, Terry (397C)" [76]<terry.himes at jpl.nasa.gov>
> > Cc: [77]"detomaso at server.detomasolist.com"
> > [78]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Fans and shroud
> > Message-ID: [79]<09791B61-DE0D-40CC-859D-437A8528952A at gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Terry - I don?t have the original radiator - I currently have a
> Fluidyne with twin suckers, tilted forward, and A/C condenser in front.
> Originally, I wanted to just add a shroud, based on a friend of mine
> who does some serious off-road driving - he swears by a shroud - says
> it really made a difference for him and that I should AT LEAST get one
> for the whole ?Pantera-Heat-Prevention Program. That sounds good -
> (PHPP). Anyway, the more I looked into things, the more I was
> ?converted" to brass/copper as it seems to be more reliable - and more
> repairable (which I like).
> > jack
> >
> >> On Sep 16, 2016, at 9:54 AM, Himes, Terry (397C)
> [80]<terry.himes at jpl.nasa.gov> wrote:
> >>
> >> Jack,
> >>
> >> Good stuff. I too am running the original radiator with new fans.
> I'm not going to change it
> >> now but I will follow your progress. Someday I will have to deal
> with it. So keep posting and
> >> I will keep saving the responses. ;-)
> >>
> >> Terry
> >>
> >>
> >>
> >> "A Purple Heart proves you were smart enough to hatch a plan,
> >> stupid enough to try it and lucky enough to survive!"
> >>
> >> Terry W. Himes
> >> JPL Jet Propulsion Laboratory
> >> Dawn Spacecraft Team
> >> Rosetta Sequence Team Lead
> >> Phone: (818) 393-6261
> >> Cell: (818) 653-8213
> >> Fax: (818) 393-3147
> >> [81]thimes at jpl.nasa.gov <[19][82]mailto:thimes at jpl.nasa.gov>
> >> ??
> >>
> >> From: DeTomaso <[83]detomaso-bounces at server.detomasolist.com
> <[20][84]mailto:detomaso-bounces at server.detomasolist.com>> on behalf of
> Jack Donahue <[85]demongusta at gmail.com <[21][86]mailto:demongusta at gmail.com>>
> >> Date: Friday, September 16, 2016 9:29 AM
> >> To: "[87]detomaso at server.detomasolist.com
> <[22][88]mailto:detomaso at server.detomasolist.com>"
> <[89]detomaso at server.detomasolist.com
> <[23][90]mailto:detomaso at server.detomasolist.com>>
> >> Cc: "[91]detomaso at server.detomasolist.com
> <[24][92]mailto:detomaso at server.detomasolist.com>"
> <[93]detomaso at server.detomasolist.com
> <[25][94]mailto:detomaso at server.detomasolist.com>>
> >> Subject: [DeTomaso] Fans and shroud
> >>
> >> Hey all - A few weeks ago I was talking asking The List about
> radiators - all said-and-done, I decided on the Hall radiator, since I
> wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
> admit it?s because I want to, not necessarily NEED to. It ain?t broke,
> but I am fixing it(?). Didn?t want to admit that, but...Lol. There
> really is an ulterior motive, but I just don?t want to mention it right
> now; but I ran my idea past Brassworks - who says they will
> ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> >> Now - fans. I really don?t know the brand name of my fans, but they
> are suckers - about 12? diameter - and the blades are ?curved? -
> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
> since they said they can be - or are - mounted in a shroud that is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal for
> me.
> >> So - I am ready for opinions/suggestions:
> >> jack
> >> #4348
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [95]DeTomaso at server.detomasolist.com
> <[26][96]mailto:DeTomaso at server.detomasolist.com>
> >> [27][97]http://server.detomasolist.com/mailman/listinfo/detomaso
> <[28][98]http://server.detomasolist.com/mailman/listinfo/detomaso>
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > Terry - I don't have the original radiator - I currently have a
> > Fluidyne with twin suckers, tilted forward, and A/C condenser in
> front.
> > Originally, I wanted to just add a shroud, based on a friend of
> mine
> > who does some serious off-road driving - he swears by a shroud -
> says
> > it really made a difference for him and that I should AT LEAST
> get one
> > for the whole "Pantera-Heat-Prevention Program. That sounds good
> -
> > (PHPP). Anyway, the more I looked into things, the more I was
> > "converted" to brass/copper as it seems to be more reliable -
> and more
> > repairable (which I like).
> >
> > jack
> >
> > On Sep 16, 2016, at 9:54 AM, Himes, Terry (397C)
> > [99]<[1]terry.himes at jpl.nasa.gov> wrote:
> >
> > Jack,
> > Good stuff. I too am running the original radiator with new
> fans. I'm
> > not going to change it
> > now but I will follow your progress. Someday I will have to deal
> with
> > it. So keep posting and
> > I will keep saving the responses. ;-)
> > Terry
> > "A Purple Heart proves you were smart enough to hatch a plan,
> > stupid enough to try it and lucky enough to survive!"
> > Terry W. Himes
> > JPL Jet Propulsion Laboratory
> > Dawn Spacecraft Team
> > Rosetta Sequence Team Lead
> > Phone: (818) 393-6261
> > Cell: (818) 653-8213
> > Fax: (818) 393-3147
> > [[100]2]thimes at jpl.nasa.gov
> > From: DeTomaso [101]<[3]detomaso-bounces at server.detomasolist.com> on
> behalf
> > of Jack Donahue [102]<[4]demongusta at gmail.com>
> > Date: Friday, September 16, 2016 9:29 AM
> > To: [103]"[5]detomaso at server.detomasolist.com"
> > [104]<[6]detomaso at server.detomasolist.com>
> > Cc: [105]"[7]detomaso at server.detomasolist.com"
> > [106]<[8]detomaso at server.detomasolist.com>
> > Subject: [DeTomaso] Fans and shroud
> > Hey all - A few weeks ago I was talking asking The List
> > about radiators - all said-and-done, I decided on the Hall
> radiator,
> > since I wanted brass/copper instead of aluminum. And, yes Mike
> Drew, I
> > have to admit it's because I want to, not necessarily NEED to. It
> ain't
> > broke, but I am fixing it(?). Didn't want to admit that,
> but...Lol.
> > There really is an ulterior motive, but I just don't want to
> mention it
> > right now; but I ran my idea past Brassworks - who says they
> will
> > "build-to-suit" - but the Hall unit looks to be
> "tried-and-proven".
> > Now - fans. I really don't know the brand name of my fans, but
> they are
> > suckers - about 12" diameter - and the blades are "curved" -
> > sickle-shaped. The names that been bouncing around are Mariah,
> SPAL,
> > and Flex-a-lite. I had read someone's post about the
> Flex-a-lite's
> > since they said they can be - or are - mounted in a shroud that
> is a
> > perfect match for the Pantera radiator size. I think. And someone
> > offered-up a part number, but I deleted (or lost) it. All normal
> for
> > me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[107]9]DeTomaso at server.detomasolist.com
> > [10][108]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [29][109]mailto:terry.himes at jpl.nasa.gov
> > 2. [30][110]mailto:thimes at jpl.nasa.gov
> > 3. [31][111]mailto:detomaso-bounces at server.detomasolist.com
> > 4. [32][112]mailto:demongusta at gmail.com
> > 5. [33][113]mailto:detomaso at server.detomasolist.com
> > 6. [34][114]mailto:detomaso at server.detomasolist.com
> > 7. [35][115]mailto:detomaso at server.detomasolist.com
> > 8. [36][116]mailto:detomaso at server.detomasolist.com
> > 9. [37][117]mailto:DeTomaso at server.detomasolist.com
> > 10. [38][118]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Fri, 16 Sep 2016 10:17:31 -0700
> > From: Jack Donahue [119]<demongusta at gmail.com>
> > To: [120]GR2835 at comcast.net
> > Cc: [121]"detomaso at server.detomasolist.com"
> > [122]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Fans and shroud
> > Message-ID: [123]<2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > There-in lies one of my problems - I could never MAKE a shroud. I
> wish I could - maybe out of foil-wrap. I will check out that website,
> thanks.
> >
> >> On Sep 16, 2016, at 10:07 AM, [124]GR2835 at comcast.net wrote:
> >>
> >> Pantera Electronics has recommended fans with part numbers under the
> fan controller button on their website.
> >> I have a stock radiator that was modified for lay down and air
> conditioning condenser up front........I have a fan shroud that I made
> and mounted the 2 sucker fans. 192 thermostat ran 192 in a 14 mile
> traffic jam last year that.took me 90 minutes to get
> through.......temperature was 98 degrees leaving the 2015 Woodward
> Cruise...........my wife complained that she was too cold with the air
> set on the warmest setting.
> >> Good luck
> >> Gerry in Illinois
> >> ----- Original Message -----
> >> From: Jack Donahue [125]<demongusta at gmail.com>
> >> To: [126]detomaso at server.detomasolist.com
> >> Cc: [127]detomaso at server.detomasolist.com
> >> Sent: Fri, 16 Sep 2016 16:29:46 -0000 (UTC)
> >> Subject: [DeTomaso] Fans and shroud
> >>
> >> Hey all - A few weeks ago I was talking asking The List about
> radiators - all said-and-done, I decided on the Hall radiator, since I
> wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
> admit it?s because I want to, not necessarily NEED to. It ain?t broke,
> but I am fixing it(?). Didn?t want to admit that, but...Lol. There
> really is an ulterior motive, but I just don?t want to mention it right
> now; but I ran my idea past Brassworks - who says they will
> ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> >> Now - fans. I really don?t know the brand name of my fans, but they
> are suckers - about 12? diameter - and the blades are ?curved? -
> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
> since they said they can be - or are - mounted in a shroud that is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal for
> me.
> >> So - I am ready for opinions/suggestions:
> >> jack
> >> #4348
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [128]DeTomaso at server.detomasolist.com
> >> [39][129]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> >
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Fri, 16 Sep 2016 11:24:26 -0700
> > From: Larry Stock [130]<larrys at panteraparts.com>
> > To: Jack Donahue [131]<demongusta at gmail.com>
> > Cc: [132]"detomaso at server.detomasolist.com"
> > [133]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Fans and shroud
> > Message-ID: [134]<D4018324.17A0EF%larrys at panteraparts.com>
> > Content-Type: text/plain; charset="ISO-8859-1"
> >
> > Hi Jack,
> >
> > You should be able to use the fans off the Fluidyne, if not we have
> our
> > Maridyne system fans and our own bracket kit and if you need shrouds
> for a
> > full lie-down system, we have those too. Typically we recommend our
> half
> > Lay forward system which minimizes the thru air turbulence.
> >
> >
> >
> >
> >
> >
> > 11041B Defl. Rad. S.S. Lay down for kit $95.00
> > 11042B Stainless deflector right $65.00
> > 11043B Stainless deflector left $65.00
> >
> >
> >
> >
> >
> >
> >
> > 11055B Radiator Puller Fan Shroud SS Mounting brackets set of 3
> $125.00
> > 11055P PPC Puller Fans & Shroud Assy $325.00
> >
> >
> >
> > If the Hall Brass radiator has the stock quick 90 degree hard
> radiator
> > tubes installed, you will not be able to mount a puller fan shroud
> under
> > those tubes, if it has the straight out tubes then you can use 90
> degree
> > molded rubber hoses to clear the Puller shroud like your Fluidyne.
> >
> > Larry Stock
> >
> > Pantera Parts Connection LC
> > 550 Mallory Way
> > Carson City NV 89701
> > [40]www.PanteraParts.com
> > PH 775-283-4411
> > Fax 775-283-4410
> > Cell 1-800-DeTomaso 800-338-6627
> >
> >
> >
> >
> >
> > On 9/16/16, 9:29 AM, "DeTomaso on behalf of Jack Donahue"
> > [135]<detomaso-bounces at server.detomasolist.com on behalf of
> > [136]demongusta at gmail.com> wrote:
> >
> >> Hey all - A few weeks ago I was talking asking The List about
> radiators
> >> - all said-and-done, I decided on the Hall radiator, since I wanted
> >> brass/copper instead of aluminum. And, yes Mike Drew, I have to
> admit
> >> it?s because I want to, not necessarily NEED to. It ain?t broke, but
> I am
> >> fixing it(?). Didn?t want to admit that, but...Lol. There really is
> an
> >> ulterior motive, but I just don?t want to mention it right now; but
> I ran
> >> my idea past Brassworks - who says they will ?build-to-suit? - but
> the
> >> Hall unit looks to be ?tried-and-proven?.
> >> Now - fans. I really don?t know the brand name of my fans, but they
> are
> >> suckers - about 12? diameter - and the blades are ?curved? -
> >> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and
> >> Flex-a-lite. I had read someone?s post about the Flex-a-lite?s since
> they
> >> said they can be - or are - mounted in a shroud that is a perfect
> match
> >> for the Pantera radiator size. I think. And someone offered-up a
> part
> >> number, but I deleted (or lost) it. All normal for me.
> >> So - I am ready for opinions/suggestions:
> >> jack
> >> #4348
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [137]DeTomaso at server.detomasolist.com
> >> [41][138]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >> the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> list.
> >> They also grant the list owner permission to maintain an archive or
> >> approve the archiving of list messages.
> >
> >
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Fri, 16 Sep 2016 14:09:55 -0500
> > From: Cullen McCann [139]<cmccann1972 at gmail.com>
> > To: [140]detomaso at server.detomasolist.com
> > Subject: [DeTomaso] McLeod hydraulic throw out
> > Message-ID:
> >
> [141]<CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Good afternoon!
> >
> > Has anyone installed the McLeod hydraulic throwout bearing that they
> say is
> > Pantera specific for the ZF, and what was your experience? I've had a
> > fantastic experience with them on another performance car
> application.
> >
> > [42][142]https://www.summitracing.com/parts/mcl-1402-22
> >
> > Thank you!!
> > -------------- next part --------------
> > Good afternoon!
> > Has anyone installed the McLeod hydraulic throwout bearing that
> they
> > say is Pantera specific for the ZF, and what was your experience?
> I've
> > had a fantastic experience with them on another performance car
> > application.
> > [1][143]https://www.summitracing.com/parts/mcl-1402-22
> > Thank you!!
> >
> > References
> >
> > 1. [43][144]https://www.summitracing.com/parts/mcl-1402-22
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Fri, 16 Sep 2016 19:27:46 +0000 (UTC)
> > From: Ken Green [145]<kenn_green at yahoo.com>
> > To: Jack Donahue [146]<demongusta at gmail.com>,
> > [147]"detomaso at server.detomasolist.com"
> [148]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Fans and shroud
> > Message-ID: [149]<1796334072.2409059.1474054066544 at mail.yahoo.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Jack,
> > ??? You should be able to find the fan and shroud here:
> >
> [44][150]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
> versal/primary-fans.html
> >
> > From: Jack Donahue [151]<demongusta at gmail.com>
> > To: [152]"detomaso at server.detomasolist.com"
> [153]<detomaso at server.detomasolist.com>
> > Cc: [154]"detomaso at server.detomasolist.com"
> [155]<detomaso at server.detomasolist.com>
> > Sent: Friday, September 16, 2016 9:29 AM
> > Subject: [DeTomaso] Fans and shroud
> >
> > Hey all - A few weeks ago I was talking asking The List about?
> radiators - all said-and-done, I decided on the Hall radiator, since I
> wanted brass/copper instead of aluminum.? And, yes Mike Drew, I have to
> admit it?s because I want to, not necessarily NEED to. It ain?t broke,
> but I am fixing it(?). Didn?t want to admit that, but...Lol. There
> really is an ulterior motive, but I just don?t want to mention it right
> now; but I ran my idea past? Brassworks? - who says they will
> ?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> > Now - fans. I really don?t know the brand name of my fans, but they
> are suckers - about 12? diameter - and the blades are ?curved?? -
> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
> and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
> since they said they can be - or are - mounted in a shroud that is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up? a part number, but I deleted (or lost) it. All normal for
> me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [156]DeTomaso at server.detomasolist.com
> > [45][157]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> >
> >
> > -------------- next part --------------
> > Jack,
> > You should be able to find the fan and shroud here:
> >
> [1][158]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
> > ersal/primary-fans.html
> >
> __________________________________________________________________
> >
> > From: Jack Donahue [159]<demongusta at gmail.com>
> > To: [160]"detomaso at server.detomasolist.com"
> > [161]<detomaso at server.detomasolist.com>
> > Cc: [162]"detomaso at server.detomasolist.com"
> > [163]<detomaso at server.detomasolist.com>
> > Sent: Friday, September 16, 2016 9:29 AM
> > Subject: [DeTomaso] Fans and shroud
> > Hey all - A few weeks ago I was talking asking The List about
> > radiators - all said-and-done, I decided on the Hall radiator,
> since I
> > wanted brass/copper instead of aluminum. And, yes Mike Drew, I
> have to
> > admit itas because I want to, not necessarily NEED to. It ainat
> broke,
> > but I am fixing it(?). Didnat want to admit that, but...Lol.
> There
> > really is an ulterior motive, but I just donat want to mention it
> right
> > now; but I ran my idea past Brassworks - who says they will
> > abuild-to-suita - but the Hall unit looks to be
> atried-and-provena.
> > Now - fans. I really donat know the brand name of my fans, but
> they are
> > suckers - about 12a diameter - and the blades are acurveda -
> > sickle-shaped. The names that been bouncing around are Mariah,
> SPAL,
> > and Flex-a-lite. I had read someoneas post about the
> Flex-a-liteas
> > since they said they can be - or are - mounted in a shroud that
> is a
> > perfect match for the Pantera radiator size. I think. And someone
> > offered-up a part number, but I deleted (or lost) it. All normal
> for
> > me.
> > So - I am ready for opinions/suggestions:
> > jack
> > #4348
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[164]2]DeTomaso at server.detomasolist.com
> > [3][165]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1.
> [46][166]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
> versal/primary-fans.html
> > 2. [47][167]mailto:DeTomaso at server.detomasolist.com
> > 3. [48][168]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 10
> > Date: Fri, 16 Sep 2016 12:35:17 -0700
> > From: Larry Finch [169]<fresnofinches at aol.com>
> > To: Email List Address For Posting [170]<detomaso at server.detomasolist.com>
> > Subject: [DeTomaso] McLeod hydraulic throw out
> > Message-ID: [171]<6C366701-6502-47C0-A0DC-59494515D156 at aol.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Cullen,
> >
> > 2511 came equipped with one of those from Dennis when I purchased it
> in 2002. Since then I have rebuilt the unit twice (three?) and most
> recently did so using what I believe to be their current offering. I
> spoke with and ordered directly from McLeod.
> >
> > My opinion, in brief, is a very simple "NO!!"
> >
> > The current offering was shipped to me with an incorrect input snout
> spacer (I solved that by using the old spacer which luckily I still had
> on hand), and the stainless steel input line, due to its 90? fitting
> where one should have used a 45? fitting, twisted itself, unseen of
> course, within the bell housing when it was connected to the hard line
> attached to the chassis rails. Even stainless steel lines don't hold up
> very long against grinding by a pressure plate.
> >
> > The stainless steel bleed line is about 4 inches too long, sticking
> outside the bell housing in a terrible display of ugly.
> >
> > Finally, my last experience started with me ordering the same rebuild
> kit I had previously used, using the same number off of the previous
> invoice. What I received from them was the rebuild kit for the current
> unit which uses an entirely different set of all rings. I ultimately
> determined that for all three generations of their hydraulic bearing
> McLeod has used exactly the same rebuild kit part number. They added no
> suffix such as a ? A or a ?B which to me seems indicative of a problem
> within the company. No, they no longer support a rebuild kit for the
> first two generations.
> >
> > While you have some experience in using one of these previously, the
> task of establishing proper free play and clearances is quite exacting
> and unforgiving. If you get it wrong there is nothing left to do but
> pull the transaxle and start all over again.
> >
> > The unit I have is now adjusted for the factory shortcomings and as
> has been my experience for over 50,000 miles, the system works just
> fine. Dennis however no longer recommends their installation and based
> on my experience I would not encourage any other owners to venture down
> that road for themselves.
> >
> > Feel free to reach out to me off-line or by phone for more of the
> gory details.
> >
> > Larry
> >
> > Sent from me using a magic, handheld electronic gizmo.
> >
> >
> > ------------------------------
> >
> > Message: 11
> > Date: Fri, 16 Sep 2016 12:50:41 -0700
> > From: MyCars [172]<mycars at comcast.net>
> > To: LSJ [173]<lashdeep at yahoo.com>, [174]"detomaso at server.detomasolist.com"
> > [175]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> > Message-ID: [176]<37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net>
> > Content-Type: text/plain; charset="utf-8"; Format="flowed"
> >
> > Going off memory (my car is still in Seattle) I am in San Diego area.
> > They are 15" Aluminum Weld 5-spoke rims, that I believe are about
> 9.5"
> > wide.
> >
> > On 9/16/2016 10:08 AM, LSJ wrote:
> >> What size wheel up front?
> >> LSJ
> >>
> >> /*central */
> >> /*wines-spirits est 1934
> >> */
> >> /*
> >> */
> >> /*625 e street nw
> >> */
> >> /*washington, dc 20004*/
> >> /*
> >> */
> >> /*centralwines.com <[49][177]http://centralwines.com/>
> >> */
> >> /*
> >> */
> >> /*facebook.com/CentralLiquors
> <[50][178]http://facebook.com/CentralLiquors>
> >> */
> >> /*
> >> */
> >> /*202-737-2800*/
> >>
> >>
> >>
> >>
> >>
> -----------------------------------------------------------------------
> -
> >> *From:* MyCars [179]<mycars at comcast.net>
> >> *To:* [180]detomaso at server.detomasolist.com
> >> *Sent:* Friday, September 16, 2016 1:03 PM
> >> *Subject:* [DeTomaso] Tires for Grp IV Flared Car
> >>
> >> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
> the
> >> rear and wondering what would be a good match for the front.
> >>
> >> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
> give
> >> the car a bit of rake, but what would the handling be like?
> >>
> >> Thanks in advance for your thoughts
> >>
> >> Roy
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [181]DeTomaso at server.detomasolist.com
> <[51][182]mailto:DeTomaso at server.detomasolist.com>
> >> [52][183]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >>
> >>
> > -------------- next part --------------
> > Going off memory (my car is still in Seattle) I am in San Diego
> area.
> > They are 15" Aluminum Weld 5-spoke rims, that I believe are about
> 9.5"
> > wide.
> >
> > On 9/16/2016 10:08 AM, LSJ wrote:
> >
> > What size wheel up front?
> >
> > LSJ
> > central
> > wines-spirits est 1934
> > 625 e street nw
> > washington, dc 20004
> > [1]centralwines.com
> > [2]facebook.com/CentralLiquors
> > 202-737-2800
> >
> __________________________________________________________________
> >
> > From: MyCars [3][184]<mycars at comcast.net>
> > To: [[185]4]detomaso at server.detomasolist.com
> > Sent: Friday, September 16, 2016 1:03 PM
> > Subject: [DeTomaso] Tires for Grp IV Flared Car
> > I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
> for the
> > rear and wondering what would be a good match for the front.
> > I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
> would
> > give
> > the car a bit of rake, but what would the handling be like?
> > Thanks in advance for your thoughts
> > Roy
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[186]5]DeTomaso at server.detomasolist.com
> > [6][187]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [53][188]http://centralwines.com/
> > 2. [54][189]http://facebook.com/CentralLiquors
> > 3. [55][190]mailto:mycars at comcast.net
> > 4. [56][191]mailto:detomaso at server.detomasolist.com
> > 5. [57][192]mailto:DeTomaso at server.detomasolist.com
> > 6. [58][193]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 12
> > Date: Fri, 16 Sep 2016 13:00:36 -0700
> > From: MyCars [194]<mycars at comcast.net>
> > To: [195]detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> > Message-ID: [196]<013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net>
> > Content-Type: text/plain; charset="windows-1252"; Format="flowed"
> >
> > I just checked Weld's website
> >
> [59][197]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
> .html
> >
> > They do not offer a 15" rim 9.5" wide, so I would guess they are 9"
> wide
> >
> >
> > On 9/16/2016 12:50 PM, MyCars wrote:
> >> Going off memory (my car is still in Seattle) I am in San Diego
> area.
> >> They are 15" Aluminum Weld 5-spoke rims, that I believe are
> about 9.5"
> >> wide.
> >>
> >> On 9/16/2016 10:08 AM, LSJ wrote:
> >>
> >> What size wheel up front?
> >>
> >> LSJ
> >> central
> >> wines-spirits est 1934
> >> 625 e street nw
> >> washington, dc 20004
> >> [1]centralwines.com
> >> [2]facebook.com/CentralLiquors
> >> 202-737-2800
> >>
> __________________________________________________________________
> >>
> >> From: MyCars [3][198]<mycars at comcast.net>
> >> To: [[199]4]detomaso at server.detomasolist.com
> >> Sent: Friday, September 16, 2016 1:03 PM
> >> Subject: [DeTomaso] Tires for Grp IV Flared Car
> >> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
> for the
> >> rear and wondering what would be a good match for the front.
> >> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
> would
> >> give
> >> the car a bit of rake, but what would the handling be like?
> >> Thanks in advance for your thoughts
> >> Roy
> >> _______________________________________________
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [[200]5]DeTomaso at server.detomasolist.com
> >> [6][201]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >> Members who post to this list grant license to the list to
> forward any
> >> message posted here to all past, current, or future members of
> the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >>
> >> References
> >>
> >> 1. [60][202]http://centralwines.com/
> >> 2. [61][203]http://facebook.com/CentralLiquors
> >> 3. [62][204]mailto:mycars at comcast.net
> >> 4. [63][205]mailto:detomaso at server.detomasolist.com
> >> 5. [64][206]mailto:DeTomaso at server.detomasolist.com
> >> 6. [65][207]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [208]DeTomaso at server.detomasolist.com
> >> [66][209]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > I just checked Weld's website
> >
> [1][210]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.
> > html
> > They do not offer a 15" rim 9.5" wide, so I would guess they are
> 9"
> > wide
> >
> > On 9/16/2016 12:50 PM, MyCars wrote:
> >
> > Going off memory (my car is still in Seattle) I am in San Diego
> area.
> > They are 15" Aluminum Weld 5-spoke rims, that I believe are about
> 9.5"
> > wide.
> >
> > On 9/16/2016 10:08 AM, LSJ wrote:
> >
> > What size wheel up front?
> >
> > LSJ
> > central
> > wines-spirits est 1934
> > 625 e street nw
> > washington, dc 20004
> > [1]centralwines.com
> > [2]facebook.com/CentralLiquors
> > 202-737-2800
> >
> __________________________________________________________________
> >
> > From: MyCars [3][2][211]<mycars at comcast.net>
> > To: [[[212]3]4]detomaso at server.detomasolist.com
> > Sent: Friday, September 16, 2016 1:03 PM
> > Subject: [DeTomaso] Tires for Grp IV Flared Car
> > I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
> for the
> > rear and wondering what would be a good match for the front.
> > I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
> would
> > give
> > the car a bit of rake, but what would the handling be like?
> > Thanks in advance for your thoughts
> > Roy
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[[213]4]5]DeTomaso at server.detomasolist.com
> > [6][5][214]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [6][215]http://centralwines.com/
> > 2. [7][216]http://facebook.com/CentralLiquors
> > 3. [8][217]mailto:mycars at comcast.net
> > 4. [9][218]mailto:detomaso at server.detomasolist.com
> > 5. [10][219]mailto:DeTomaso at server.detomasolist.com
> > 6. [11][220]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> >
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[221]12]DeTomaso at server.detomasolist.com
> > [13][222]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the li
> > nks above.
> >
> > Members who post to this list grant license to the list to forward
> any message p
> > osted here to all past, current, or future members of the list. They
> also grant
> > the list owner permission to maintain an archive or approve the
> archiving of lis
> > t messages.
> >
> > References
> >
> > 1.
> [67][223]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
> .html
> > 2. [68][224]mailto:mycars at comcast.net
> > 3. [69][225]m[226]69]mailto:4]detomaso at server.detomasolist.com
> > 4. [70][227]m[228]70]mailto:5]DeTomaso at server.detomasolist.com
> > 5. [71][229]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 6. [72][230]http://centralwines.com/
> > 7. [73][231]http://facebook.com/CentralLiquors
> > 8. [74][232]mailto:mycars at comcast.net
> > 9. [75][233]mailto:detomaso at server.detomasolist.com
> > 10. [76][234]mailto:DeTomaso at server.detomasolist.com
> > 11. [77][235]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 12. [78][236]mailto:DeTomaso at server.detomasolist.com
> > 13. [79][237]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 13
> > Date: Fri, 16 Sep 2016 16:26:27 -0400
> > From: Will Kooiman [238]<will.kooiman at gmail.com>
> > To: Larry Finch [239]<fresnofinches at aol.com>, Email List Address For
> > Posting [240]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] McLeod hydraulic throw out
> > Message-ID: [241]<D401CD29.16A666%will.kooiman at gmail.com>
> > Content-Type: text/plain; charset="ISO-8859-1"
> >
> > Wow.
> >
> > I have one in my Cobra, and so far it has worked perfectly.
> >
> > My Cobra came with an external slave from a Volvo that was readily
> > available 20 years ago, but is now unobtanium. Rather than building
> a new
> > bracket for a different slave, I switched to a McLeod slave.
> >
> > At any rate, as I said, it has worked perfectly - so far.
> >
> > --
> > Will
> >
> >
> >
> >
> >
> > On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> > [242]<detomaso at server.detomasolist.com> wrote:
> >
> >> Cullen,
> >>
> >> 2511 came equipped with one of those from Dennis when I purchased it
> in
> >> 2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >> did so using what I believe to be their current offering. I spoke
> with
> >> and ordered directly from McLeod.
> >>
> >> My opinion, in brief, is a very simple "NO!!"
> >>
> >> The current offering was shipped to me with an incorrect input snout
> >> spacer (I solved that by using the old spacer which luckily I still
> had
> >> on hand), and the stainless steel input line, due to its 90? fitting
> >> where one should have used a 45? fitting, twisted itself, unseen of
> >> course, within the bell housing when it was connected to the hard
> line
> >> attached to the chassis rails. Even stainless steel lines don't hold
> up
> >> very long against grinding by a pressure plate.
> >>
> >> The stainless steel bleed line is about 4 inches too long, sticking
> >> outside the bell housing in a terrible display of ugly.
> >>
> >> Finally, my last experience started with me ordering the same
> rebuild kit
> >> I had previously used, using the same number off of the previous
> invoice.
> >> What I received from them was the rebuild kit for the current unit
> which
> >> uses an entirely different set of all rings. I ultimately determined
> that
> >> for all three generations of their hydraulic bearing McLeod has used
> >> exactly the same rebuild kit part number. They added no suffix such
> as a
> >> ? A or a ?B which to me seems indicative of a problem within the
> company.
> >> No, they no longer support a rebuild kit for the first two
> generations.
> >>
> >> While you have some experience in using one of these previously, the
> task
> >> of establishing proper free play and clearances is quite exacting
> and
> >> unforgiving. If you get it wrong there is nothing left to do but
> pull the
> >> transaxle and start all over again.
> >>
> >> The unit I have is now adjusted for the factory shortcomings and as
> has
> >> been my experience for over 50,000 miles, the system works just
> fine.
> >> Dennis however no longer recommends their installation and based on
> my
> >> experience I would not encourage any other owners to venture down
> that
> >> road for themselves.
> >>
> >> Feel free to reach out to me off-line or by phone for more of the
> gory
> >> details.
> >>
> >> Larry
> >>
> >> Sent from me using a magic, handheld electronic gizmo.
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [243]DeTomaso at server.detomasolist.com
> >> [80][244]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >> the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> list.
> >> They also grant the list owner permission to maintain an archive or
> >> approve the archiving of list messages.
> >
> >
> >
> > ------------------------------
> >
> > Message: 14
> > Date: Fri, 16 Sep 2016 15:50:41 -0500
> > From: Cullen McCann [245]<cmccann1972 at gmail.com>
> > To: Will Kooiman [246]<will.kooiman at gmail.com>
> > Cc: Email List Address For Posting
> [247]<detomaso at server.detomasolist.com>,
> > Larry Finch [248]<fresnofinches at aol.com>
> > Subject: Re: [DeTomaso] McLeod hydraulic throw out
> > Message-ID:
> >
> [249]<CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Thank you Larry. You answered my question perfectly. I am like Will,
> I have
> > one on my Cobra as well, with a ford Top Loader and its been there
> for
> > several years and Ive always loved it. I actually bought one that was
> "new"
> > but several generations old, and when I called McLeod to inquire
> about
> > fresh O-rings, they sent me a brand new unit just to "ensure a
> positive
> > experience". I installed it with a performance clutch and a
> scattershield,
> > bled it according to the instructions and that was about 4 years ago.
> > Havent had a lick of trouble. (knocking on wood now).
> >
> > the frame rails on my cobra are 24" apart and I couldn't fit the
> clutch
> > fork between the side of the bellhousing and the frame rail, and ive
> had a
> > bad experience with performance clutches and cables breaking in the
> > past...so I went the hydraulic route and have loved it.
> >
> > however... I will certainly consider carefully this drama as I set up
> my P
> > car. I have a plan B with an external slave also, if I choose not to
> use
> > the factory unit. Thank you sir.
> >
> > Cullen
> >
> > On Fri, Sep 16, 2016 at 3:26 PM, Will Kooiman
> [250]<will.kooiman at gmail.com>
> > wrote:
> >
> >> Wow.
> >>
> >> I have one in my Cobra, and so far it has worked perfectly.
> >>
> >> My Cobra came with an external slave from a Volvo that was readily
> >> available 20 years ago, but is now unobtanium. Rather than building
> a new
> >> bracket for a different slave, I switched to a McLeod slave.
> >>
> >> At any rate, as I said, it has worked perfectly - so far.
> >>
> >> --
> >> Will
> >>
> >>
> >>
> >>
> >>
> >> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >> [251]<detomaso at server.detomasolist.com> wrote:
> >>
> >>> Cullen,
> >>>
> >>> 2511 came equipped with one of those from Dennis when I purchased
> it in
> >>> 2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >>> did so using what I believe to be their current offering. I spoke
> with
> >>> and ordered directly from McLeod.
> >>>
> >>> My opinion, in brief, is a very simple "NO!!"
> >>>
> >>> The current offering was shipped to me with an incorrect input
> snout
> >>> spacer (I solved that by using the old spacer which luckily I still
> had
> >>> on hand), and the stainless steel input line, due to its 90?
> fitting
> >>> where one should have used a 45? fitting, twisted itself, unseen of
> >>> course, within the bell housing when it was connected to the hard
> line
> >>> attached to the chassis rails. Even stainless steel lines don't
> hold up
> >>> very long against grinding by a pressure plate.
> >>>
> >>> The stainless steel bleed line is about 4 inches too long, sticking
> >>> outside the bell housing in a terrible display of ugly.
> >>>
> >>> Finally, my last experience started with me ordering the same
> rebuild kit
> >>> I had previously used, using the same number off of the previous
> invoice.
> >>> What I received from them was the rebuild kit for the current unit
> which
> >>> uses an entirely different set of all rings. I ultimately
> determined that
> >>> for all three generations of their hydraulic bearing McLeod has
> used
> >>> exactly the same rebuild kit part number. They added no suffix such
> as a
> >>> ? A or a ?B which to me seems indicative of a problem within the
> company.
> >>> No, they no longer support a rebuild kit for the first two
> generations.
> >>>
> >>> While you have some experience in using one of these previously,
> the task
> >>> of establishing proper free play and clearances is quite exacting
> and
> >>> unforgiving. If you get it wrong there is nothing left to do but
> pull the
> >>> transaxle and start all over again.
> >>>
> >>> The unit I have is now adjusted for the factory shortcomings and as
> has
> >>> been my experience for over 50,000 miles, the system works just
> fine.
> >>> Dennis however no longer recommends their installation and based on
> my
> >>> experience I would not encourage any other owners to venture down
> that
> >>> road for themselves.
> >>>
> >>> Feel free to reach out to me off-line or by phone for more of the
> gory
> >>> details.
> >>>
> >>> Larry
> >>>
> >>> Sent from me using a magic, handheld electronic gizmo.
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA
> >>> Posted emails must not exceed 1.5 Megabytes
> >>> DeTomaso mailing list
> >>> [252]DeTomaso at server.detomasolist.com
> >>> [81][253]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>> the links above.
> >>>
> >>> Members who post to this list grant license to the list to forward
> any
> >>> message posted here to all past, current, or future members of the
> list.
> >>> They also grant the list owner permission to maintain an archive or
> >>> approve the archiving of list messages.
> >>
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [254]DeTomaso at server.detomasolist.com
> >> [82][255]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >> the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> list.
> >> They also grant the list owner permission to maintain an archive or
> approve
> >> the archiving of list messages.
> >>
> > -------------- next part --------------
> > Thank you Larry. You answered my question perfectly. I am like
> Will, I
> > have one on my Cobra as well, with a ford Top Loader and its been
> there
> > for several years and Ive always loved it. I actually bought one
> that
> > was "new" but several generations old, and when I called McLeod
> to
> > inquire about fresh O-rings, they sent me a brand new unit just
> to
> > "ensure a positive experience". I installed it with a performance
> > clutch and a scattershield, bled it according to the instructions
> and
> > that was about 4 years ago. Havent had a lick of trouble.A
> (knocking
> > on wood now).
> > the frame rails on my cobra are 24" apart and I couldn't fit the
> clutch
> > fork between the side of the bellhousing and the frame rail, and
> ive
> > had a bad experience with performance clutches and cables
> breaking in
> > the past...so I went the hydraulic route and have loved it.
> > however... I will certainly consider carefully this drama as I
> set up
> > my P car. I have a plan B with an external slave also, if I
> choose not
> > to use the factory unit.A Thank you sir.
> > Cullen
> >
> > On Fri, Sep 16, 2016 at 3:26 PM, Will Kooiman
> > [256]<[1]will.kooiman at gmail.com> wrote:
> >
> > Wow.
> > I have one in my Cobra, and so far it has worked perfectly.
> > My Cobra came with an external slave from a Volvo that was
> readily
> > available 20 years ago, but is now unobtanium.A Rather than
> > building a new
> > bracket for a different slave, I switched to a McLeod slave.
> > At any rate, as I said, it has worked perfectly - so far.
> > --
> > Will
> > On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >
> > [257]<[2]detomaso at server.detomasolist.com> wrote:
> > >Cullen,
> > >
> > >2511 came equipped with one of those from Dennis when I
> purchased it
> > in
> > >2002. Since then I have rebuilt the unit twice (three?) and most
> > recently
> > >did so using what I believe to be their current offering. I
> spoke with
> > >and ordered directly from McLeod.
> > >
> > >My opinion, in brief, is a very simple "NO!!"
> > >
> > >The current offering was shipped to me with an incorrect input
> snout
> > >spacer (I solved that by using the old spacer which luckily I
> still
> > had
> > >on hand), and the stainless steel input line, due to its 90ADEG
> > fitting
> > >where one should have used a 45ADEG fitting, twisted itself,
> unseen of
> > >course, within the bell housing when it was connected to the
> hard line
> > >attached to the chassis rails. Even stainless steel lines don't
> hold
> > up
> > >very long against grinding by a pressure plate.
> > >
> > >The stainless steel bleed line is about 4 inches too long,
> sticking
> > >outside the bell housing in a terrible display of ugly.
> > >
> > >Finally, my last experience started with me ordering the same
> rebuild
> > kit
> > >I had previously used, using the same number off of the previous
> > invoice.
> > >What I received from them was the rebuild kit for the current
> unit
> > which
> > >uses an entirely different set of all rings. I ultimately
> determined
> > that
> > >for all three generations of their hydraulic bearing McLeod has
> used
> > >exactly the same rebuild kit part number. They added no suffix
> such as
> > a
> > >A A or a AB which to me seems indicative of a problem within the
> > company.
> > >No, they no longer support a rebuild kit for the first two
> > generations.
> > >
> > >While you have some experience in using one of these previously,
> the
> > task
> > >of establishing proper free play and clearances is quite
> exacting and
> > >unforgiving. If you get it wrong there is nothing left to do but
> pull
> > the
> > >transaxle and start all over again.
> > >
> > >The unit I have is now adjusted for the factory shortcomings and
> as
> > has
> > >been my experience for over 50,000 miles, the system works just
> fine.
> > >Dennis however no longer recommends their installation and based
> on my
> > >experience I would not encourage any other owners to venture
> down that
> > >road for themselves.
> > >
> > >Feel free to reach out to me off-line or by phone for more of
> the gory
> > >details.
> > >
> > >Larry
> > >
> > >Sent from me using a magic, handheld electronic gizmo.
> > >_______________________________________________
> > >
> > >
> > >Detomaso Email List is not managed by POCA
> > >Posted emails must not exceed 1.5 Megabytes
> > >DeTomaso mailing list
> > >[[258]3]DeTomaso at server.detomasolist.com
> > >[4][259]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >
> > >To manage your subscription (change email address, unsubscribe,
> etc.)
> > use
> > >the links above.
> > >
> > >Members who post to this list grant license to the list to
> forward any
> > >message posted here to all past, current, or future members of
> the
> > list.
> > >They also grant the list owner permission to maintain an archive
> or
> > >approve the archiving of list messages.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[260]5]DeTomaso at server.detomasolist.com
> > [6][261]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [83][262]mailto:will.kooiman at gmail.com
> > 2. [84][263]mailto:detomaso at server.detomasolist.com
> > 3. [85][264]mailto:DeTomaso at server.detomasolist.com
> > 4. [86][265]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 5. [87][266]mailto:DeTomaso at server.detomasolist.com
> > 6. [88][267]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 15
> > Date: Fri, 16 Sep 2016 13:53:15 -0700
> > From: Larry Stock [268]<larrys at panteraparts.com>
> > To: Will Kooiman [269]<will.kooiman at gmail.com>, Larry Finch
> > [270]<fresnofinches at aol.com>, Email List Address For Posting
> > [271]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] McLeod hydraulic throw out
> > Message-ID: [272]<D401A883.17A144%larrys at panteraparts.com>
> > Content-Type: text/plain; charset="EUC-KR"
> >
> > The basic problem is that the bell housing is too confined and not
> > ventilated well enough to dissipate the heat. The Superformance is
> using a
> > Quick Time bell housing that has much more ventilation than the
> DeTomaso
> > Bell housing. Just another reason not to run those Plugs that some
> vendors
> > offer, that close off the inspection hole at the left hand top of the
> bell
> > housing. That is the only heat dissipation vent there is.
> > Larry
> >
> > On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> > [273]<detomaso-bounces at server.detomasolist.com on behalf of
> > [274]will.kooiman at gmail.com> wrote:
> >
> >> Wow.
> >>
> >> I have one in my Cobra, and so far it has worked perfectly.
> >>
> >> My Cobra came with an external slave from a Volvo that was readily
> >> available 20 years ago, but is now unobtanium. Rather than building
> a new
> >> bracket for a different slave, I switched to a McLeod slave.
> >>
> >> At any rate, as I said, it has worked perfectly - so far.
> >>
> >> --
> >> Will
> >>
> >>
> >>
> >>
> >>
> >> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >> [275]<detomaso at server.detomasolist.com> wrote:
> >>
> >>> Cullen,
> >>>
> >>> 2511 came equipped with one of those from Dennis when I purchased
> it in
> >>> 2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >>> did so using what I believe to be their current offering. I spoke
> with
> >>> and ordered directly from McLeod.
> >>>
> >>> My opinion, in brief, is a very simple "NO!!"
> >>>
> >>> The current offering was shipped to me with an incorrect input
> snout
> >>> spacer (I solved that by using the old spacer which luckily I still
> had
> >>> on hand), and the stainless steel input line, due to its 90?
> fitting
> >>> where one should have used a 45? fitting, twisted itself, unseen of
> >>> course, within the bell housing when it was connected to the hard
> line
> >>> attached to the chassis rails. Even stainless steel lines don't
> hold up
> >>> very long against grinding by a pressure plate.
> >>>
> >>> The stainless steel bleed line is about 4 inches too long, sticking
> >>> outside the bell housing in a terrible display of ugly.
> >>>
> >>> Finally, my last experience started with me ordering the same
> rebuild kit
> >>> I had previously used, using the same number off of the previous
> invoice.
> >>> What I received from them was the rebuild kit for the current unit
> which
> >>> uses an entirely different set of all rings. I ultimately
> determined that
> >>> for all three generations of their hydraulic bearing McLeod has
> used
> >>> exactly the same rebuild kit part number. They added no suffix such
> as a
> >>> ? A or a ?B which to me seems indicative of a problem within the
> company.
> >>> No, they no longer support a rebuild kit for the first two
> generations.
> >>>
> >>> While you have some experience in using one of these previously,
> the task
> >>> of establishing proper free play and clearances is quite exacting
> and
> >>> unforgiving. If you get it wrong there is nothing left to do but
> pull the
> >>> transaxle and start all over again.
> >>>
> >>> The unit I have is now adjusted for the factory shortcomings and as
> has
> >>> been my experience for over 50,000 miles, the system works just
> fine.
> >>> Dennis however no longer recommends their installation and based on
> my
> >>> experience I would not encourage any other owners to venture down
> that
> >>> road for themselves.
> >>>
> >>> Feel free to reach out to me off-line or by phone for more of the
> gory
> >>> details.
> >>>
> >>> Larry
> >>>
> >>> Sent from me using a magic, handheld electronic gizmo.
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA
> >>> Posted emails must not exceed 1.5 Megabytes
> >>> DeTomaso mailing list
> >>> [276]DeTomaso at server.detomasolist.com
> >>> [89][277]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>> the links above.
> >>>
> >>> Members who post to this list grant license to the list to forward
> any
> >>> message posted here to all past, current, or future members of the
> list.
> >>> They also grant the list owner permission to maintain an archive or
> >>> approve the archiving of list messages.
> >>
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [278]DeTomaso at server.detomasolist.com
> >> [90][279]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >> the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> list.
> >> They also grant the list owner permission to maintain an archive or
> >> approve the archiving of list messages.
> >>
> >
> >
> >
> > ------------------------------
> >
> > Message: 16
> > Date: Fri, 16 Sep 2016 14:11:22 -0700
> > From: Mike Drew [280]<MikeLDrew at aol.com>
> > To: David Nunn [281]<dnunn at telus.net>
> > Cc: "[282]<detomaso at server.detomasolist.com>"
> > [283]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Message-ID: [284]<C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > All,
> >
> > Here is a photo of the IPSCO water pump idler pulley setup. Note
> there is no alternator in view, as this car is fitted with a flat
> firewall kit that moves the alternator outboard of the A/C system.
> >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image.jpeg
> > Type: image/jpeg
> > Size: 594482 bytes
> > Desc: not available
> > URL:
> <[91][285]http://server.detomasolist.com/pipermail/detomaso/attachments/2016
> 0916/33a69e52/attachment-0001.jpeg>
> > -------------- next part --------------
> >
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 15, 2016, at 15:41, "David Nunn" [286]<dnunn at telus.net> wrote:
> >
> >> Rob,
> >>
> >> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
> It
> >> eliminates the "fitted", non-adjustable belt and makes it
> adjustable.
> >> It sure makes installation a lot easier. It's not listed on
> IPSCO's web
> >> site so you have to call or e-mail to get details.
> >>
> >> Also, IPSCO has an idler pulley kit that makes installation and
> belt
> >> tensioning a breeze.
> >>
> >> [1][287]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >>
> >> References
> >>
> >> 1. [92][288]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [289]DeTomaso at server.detomasolist.com
> >> [93][290]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > ------------------------------
> >
> > Message: 17
> > Date: Fri, 16 Sep 2016 21:16:34 +0000
> > From: Julian Kift [291]<julian_kift at hotmail.com>
> > To: David Nunn [292]<dnunn at telus.net>, Mike Drew [293]<MikeLDrew at aol.com>,
> > [294]"detomaso at server.detomasolist.com"
> [295]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Message-ID:
> >
> [296]<CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.prod.out
> look.com>
> >
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Mike,
> >
> >
> > It gets even better, that looks to be a different idler again, the
> one that was previously linked appears to go in the stock location, but
> was adjustable from the front negating the usual need to get a wrench
> on the rear.
> >
> > Julian
> > ________________________________
> > From: DeTomaso [297]<detomaso-bounces at server.detomasolist.com> on behalf
> of Mike Drew via DeTomaso [298]<detomaso at server.detomasolist.com>
> > Sent: Friday, September 16, 2016 2:11 PM
> > To: David Nunn
> > Cc: [299]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > All,
> >
> > Here is a photo of the IPSCO water pump idler pulley setup. Note
> there is no alternator in view, as this car is fitted with a flat
> firewall kit that moves the alternator outboard of the A/C system.
> >
> > [[300]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> >
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 15, 2016, at 15:41, "David Nunn" [301]<dnunn at telus.net> wrote:
> >
> >> Rob,
> >>
> >> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
> It
> >> eliminates the "fitted", non-adjustable belt and makes it
> adjustable.
> >> It sure makes installation a lot easier. It's not listed on
> IPSCO's web
> >> site so you have to call or e-mail to get details.
> >>
> >> Also, IPSCO has an idler pulley kit that makes installation and
> belt
> >> tensioning a breeze.
> >>
> >> [1][302]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >>
> >> References
> >>
> >> 1. [94][303]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >
> [[95][304]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg][305]<http:
> //ww
> w.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm>
> >
> > Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking
> ...<[96][306]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm>
> > [97]www.ipsco.org
> > Pantera Idler Pulley Assembly . Replacement for factory Idler Pulley,
> this assembly allow adjustment without trying to hold a wrench behind
> the bracket to tighten in ...
> >
> >
> >
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [307]DeTomaso at server.detomasolist.com
> >> [98][308]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [309]DeTomaso at server.detomasolist.com
> > [99][310]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > Mike,
> >
> > It gets even better, that looks to be a different idler again,
> the one
> > that was previously linked appears to go in the stock location,
> but was
> > adjustable from the front negating the usual need to get a wrench
> on
> > the rear.
> > Julian
> >
> __________________________________________________________________
> >
> > From: DeTomaso [311]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> > Mike Drew via DeTomaso [312]<detomaso at server.detomasolist.com>
> > Sent: Friday, September 16, 2016 2:11 PM
> > To: David Nunn
> > Cc: [313]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > All,
> > Here is a photo of the IPSCO water pump idler pulley setup. Note
> there
> > is no alternator in view, as this car is fitted with a flat
> firewall
> > kit that moves the alternator outboard of the A/C system.
> >
> [[314]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> > Mike
> > Sent from my iPhone
> > On Sep 15, 2016, at 15:41, "David Nunn" [315]<dnunn at telus.net> wrote:
> > > Rob,
> > >
> > > If I'm not mistaken, IPSCO sells a kit that modifies Kirk's
> kit. It
> > > eliminates the "fitted", non-adjustable belt and makes it
> > adjustable.
> > > It sure makes installation a lot easier. It's not listed on
> IPSCO's
> > web
> > > site so you have to call or e-mail to get details.
> > >
> > > Also, IPSCO has an idler pulley kit that makes installation
> and
> > belt
> > > tensioning a breeze.
> > >
> > > [1][316]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > >
> > > References
> > >
> > > 1. [1][317]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > [2][Idler%20Pulley.jpg]
> > [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
> > [100]www.ipsco.org
> > Pantera Idler Pulley Assembly . Replacement for factory Idler
> Pulley,
> > this assembly allow adjustment without trying to hold a wrench
> behind
> > the bracket to tighten in ...
> > > _______________________________________________
> > >
> > >
> > > Detomaso Email List is not managed by POCA
> > > Posted emails must not exceed 1.5 Megabytes
> > > DeTomaso mailing list
> > > [318]DeTomaso at server.detomasolist.com
> > > [4][319]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >
> > > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > >
> > > Members who post to this list grant license to the list to
> forward
> > any message posted here to all past, current, or future members
> of the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [320]DeTomaso at server.detomasolist.com
> > [5][321]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [101][322]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 2. [102][323]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 3. [103][324]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 4. [104][325]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 5. [105][326]http://server.detomasolist.com/mailman/listinfo/detomaso
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image.jpeg
> > Type: image/jpeg
> > Size: 594482 bytes
> > Desc: image.jpeg
> > URL:
> <[106][327]http://server.detomasolist.com/pipermail/detomaso/attachments/201
> 60916/ed6ee2dd/attachment-0001.jpeg>
> >
> > ------------------------------
> >
> > Message: 18
> > Date: Fri, 16 Sep 2016 14:18:39 -0700
> > From: Mike Drew [328]<MikeLDrew at aol.com>
> > To: Julian Kift [329]<julian_kift at hotmail.com>
> > Cc: David Nunn [330]<dnunn at telus.net>, [331]"detomaso at server.detomasolist.c
> om"
> > [332]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Message-ID: [333]<7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com>
> > Content-Type: text/plain; charset=us-ascii
> >
> > Julian,
> >
> > Yes, he mentioned two different products for different applications
> but only had a link for the stock replacement idler. My photo shows the
> idler that replaces the alternator to tension the water pump belt.
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 16, 2016, at 14:16, Julian Kift [334]<julian_kift at hotmail.com>
> wrote:
> >
> >> Mike,
> >>
> >> It gets even better, that looks to be a different idler again,
> the one
> >> that was previously linked appears to go in the stock location,
> but was
> >> adjustable from the front negating the usual need to get a wrench
> on
> >> the rear.
> >> Julian
> >>
> __________________________________________________________________
> >>
> >> From: DeTomaso [335]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> >> Mike Drew via DeTomaso [336]<detomaso at server.detomasolist.com>
> >> Sent: Friday, September 16, 2016 2:11 PM
> >> To: David Nunn
> >> Cc: [337]<detomaso at server.detomasolist.com>
> >> Subject: Re: [DeTomaso] Sanden Compressors noises
> >>
> >> All,
> >> Here is a photo of the IPSCO water pump idler pulley setup. Note
> there
> >> is no alternator in view, as this car is fitted with a flat
> firewall
> >> kit that moves the alternator outboard of the A/C system.
> >>
> [[338]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> >> Mike
> >> Sent from my iPhone
> >> On Sep 15, 2016, at 15:41, "David Nunn" [339]<dnunn at telus.net> wrote:
> >>> Rob,
> >>>
> >>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
> It
> >>> eliminates the "fitted", non-adjustable belt and makes it
> >> adjustable.
> >>> It sure makes installation a lot easier. It's not listed on
> IPSCO's
> >> web
> >>> site so you have to call or e-mail to get details.
> >>>
> >>> Also, IPSCO has an idler pulley kit that makes installation and
> >> belt
> >>> tensioning a breeze.
> >>>
> >>> [1][340]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >>>
> >>> References
> >>>
> >>> 1. [1][341]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> [2][Idler%20Pulley.jpg]
> >> [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
> >> [107]www.ipsco.org
> >> Pantera Idler Pulley Assembly . Replacement for factory Idler
> Pulley,
> >> this assembly allow adjustment without trying to hold a wrench
> behind
> >> the bracket to tighten in ...
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA
> >>> Posted emails must not exceed 1.5 Megabytes
> >>> DeTomaso mailing list
> >>> [342]DeTomaso at server.detomasolist.com
> >>> [4][343]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >>> Members who post to this list grant license to the list to forward
> >> any message posted here to all past, current, or future members
> of the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >> _______________________________________________
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [344]DeTomaso at server.detomasolist.com
> >> [5][345]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >> Members who post to this list grant license to the list to
> forward any
> >> message posted here to all past, current, or future members of
> the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >>
> >> References
> >>
> >> 1. [108][346]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 2. [109][347]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 3. [110][348]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 4. [111][349]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> 5. [112][350]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [351]DeTomaso at server.detomasolist.com
> >> [113][352]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> >
> > ------------------------------
> >
> > Message: 19
> > Date: Fri, 16 Sep 2016 14:19:14 -0700
> > From: Larry Finch [353]<fresnofinches at aol.com>
> > To: Email List Address For Posting [354]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] McLeod hydraulic throw out
> > Message-ID: [355]<78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Heat?
> >
> > As I previously wrote, I have over 50,000 miles using one of the
> McLeod systems.
> >
> > Those 50,000 miles have all been WITH a black plastic plug in the
> hole that some wish to call a ventilation hole rather than an
> inspection hole. Your choice, I don't really care.
> >
> > Whatever heat issues may or may not be present, with or without a
> plug, have never appeared to be an issue in any way, shape or form in
> my many years of experience.
> >
> > I am all ears if Larry or anyone else has history that supports a
> failure of the McLeod unit from excessive heat.
> >
> > Larry
> >
> > Sent from me using a magic, handheld electronic gizmo.
> >
> >> On Sep 16, 2016, at 1:53 PM, Larry Stock [356]<larrys at panteraparts.com>
> wrote:
> >>
> >> The basic problem is that the bell housing is too confined and not
> >> ventilated well enough to dissipate the heat. The Superformance is
> using a
> >> Quick Time bell housing that has much more ventilation than the
> DeTomaso
> >> Bell housing. Just another reason not to run those Plugs that some
> vendors
> >> offer, that close off the inspection hole at the left hand top of
> the bell
> >> housing. That is the only heat dissipation vent there is.
> >> Larry
> >>
> >> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> >> [357]<detomaso-bounces at server.detomasolist.com on behalf of
> >> [358]will.kooiman at gmail.com> wrote:
> >>
> >>> Wow.
> >>>
> >>> I have one in my Cobra, and so far it has worked perfectly.
> >>>
> >>> My Cobra came with an external slave from a Volvo that was readily
> >>> available 20 years ago, but is now unobtanium. Rather than
> building a new
> >>> bracket for a different slave, I switched to a McLeod slave.
> >>>
> >>> At any rate, as I said, it has worked perfectly - so far.
> >>>
> >>> --
> >>> Will
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >>> [359]<detomaso at server.detomasolist.com> wrote:
> >>>
> >>>> Cullen,
> >>>>
> >>>> 2511 came equipped with one of those from Dennis when I purchased
> it in
> >>>> 2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >>>> did so using what I believe to be their current offering. I spoke
> with
> >>>> and ordered directly from McLeod.
> >>>>
> >>>> My opinion, in brief, is a very simple "NO!!"
> >>>>
> >>>> The current offering was shipped to me with an incorrect input
> snout
> >>>> spacer (I solved that by using the old spacer which luckily I
> still had
> >>>> on hand), and the stainless steel input line, due to its 90?
> fitting
> >>>> where one should have used a 45? fitting, twisted itself, unseen
> of
> >>>> course, within the bell housing when it was connected to the hard
> line
> >>>> attached to the chassis rails. Even stainless steel lines don't
> hold up
> >>>> very long against grinding by a pressure plate.
> >>>>
> >>>> The stainless steel bleed line is about 4 inches too long,
> sticking
> >>>> outside the bell housing in a terrible display of ugly.
> >>>>
> >>>> Finally, my last experience started with me ordering the same
> rebuild kit
> >>>> I had previously used, using the same number off of the previous
> invoice.
> >>>> What I received from them was the rebuild kit for the current unit
> which
> >>>> uses an entirely different set of all rings. I ultimately
> determined that
> >>>> for all three generations of their hydraulic bearing McLeod has
> used
> >>>> exactly the same rebuild kit part number. They added no suffix
> such as a
> >>>> A or a ?B which to me seems indicative of a problem within the
> company.
> >>>> No, they no longer support a rebuild kit for the first two
> generations.
> >>>>
> >>>> While you have some experience in using one of these previously,
> the task
> >>>> of establishing proper free play and clearances is quite exacting
> and
> >>>> unforgiving. If you get it wrong there is nothing left to do but
> pull the
> >>>> transaxle and start all over again.
> >>>>
> >>>> The unit I have is now adjusted for the factory shortcomings and
> as has
> >>>> been my experience for over 50,000 miles, the system works just
> fine.
> >>>> Dennis however no longer recommends their installation and based
> on my
> >>>> experience I would not encourage any other owners to venture down
> that
> >>>> road for themselves.
> >>>>
> >>>> Feel free to reach out to me off-line or by phone for more of the
> gory
> >>>> details.
> >>>>
> >>>> Larry
> >>>>
> >>>> Sent from me using a magic, handheld electronic gizmo.
> >>>> _______________________________________________
> >>>>
> >>>>
> >>>> Detomaso Email List is not managed by POCA
> >>>> Posted emails must not exceed 1.5 Megabytes
> >>>> DeTomaso mailing list
> >>>> [360]DeTomaso at server.detomasolist.com
> >>>> [114][361]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>>
> >>>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>>> the links above.
> >>>>
> >>>> Members who post to this list grant license to the list to forward
> any
> >>>> message posted here to all past, current, or future members of the
> list.
> >>>> They also grant the list owner permission to maintain an archive
> or
> >>>> approve the archiving of list messages.
> >>>
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA
> >>> Posted emails must not exceed 1.5 Megabytes
> >>> DeTomaso mailing list
> >>> [362]DeTomaso at server.detomasolist.com
> >>> [115][363]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>> the links above.
> >>>
> >>> Members who post to this list grant license to the list to forward
> any
> >>> message posted here to all past, current, or future members of the
> list.
> >>> They also grant the list owner permission to maintain an archive or
> >>> approve the archiving of list messages.
> >>
> >
> >
> > ------------------------------
> >
> > Message: 20
> > Date: Fri, 16 Sep 2016 16:38:06 -0500
> > From: Cullen McCann [364]<cmccann1972 at gmail.com>
> > To: Larry Stock [365]<larrys at panteraparts.com>
> > Cc: Email List Address For Posting
> [366]<detomaso at server.detomasolist.com>,
> > Larry Finch [367]<fresnofinches at aol.com>
> > Subject: Re: [DeTomaso] McLeod hydraulic throw out
> > Message-ID:
> >
> [368]<CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > well, I have the quicktime bellhousing for the ZF on 4653. I forgot
> to
> > mention that. Also didn't consider it would be relevant. hmmmm.
> >
> > On Fri, Sep 16, 2016 at 3:53 PM, Larry Stock
> [369]<larrys at panteraparts.com>
> > wrote:
> >
> >> The basic problem is that the bell housing is too confined and not
> >> ventilated well enough to dissipate the heat. The Superformance is
> using a
> >> Quick Time bell housing that has much more ventilation than the
> DeTomaso
> >> Bell housing. Just another reason not to run those Plugs that some
> vendors
> >> offer, that close off the inspection hole at the left hand top of
> the bell
> >> housing. That is the only heat dissipation vent there is.
> >> Larry
> >>
> >> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> >> [370]<detomaso-bounces at server.detomasolist.com on behalf of
> >> [371]will.kooiman at gmail.com> wrote:
> >>
> >>> Wow.
> >>>
> >>> I have one in my Cobra, and so far it has worked perfectly.
> >>>
> >>> My Cobra came with an external slave from a Volvo that was readily
> >>> available 20 years ago, but is now unobtanium. Rather than
> building a new
> >>> bracket for a different slave, I switched to a McLeod slave.
> >>>
> >>> At any rate, as I said, it has worked perfectly - so far.
> >>>
> >>> --
> >>> Will
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >>> [372]<detomaso at server.detomasolist.com> wrote:
> >>>
> >>>> Cullen,
> >>>>
> >>>> 2511 came equipped with one of those from Dennis when I purchased
> it in
> >>>> 2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >>>> did so using what I believe to be their current offering. I spoke
> with
> >>>> and ordered directly from McLeod.
> >>>>
> >>>> My opinion, in brief, is a very simple "NO!!"
> >>>>
> >>>> The current offering was shipped to me with an incorrect input
> snout
> >>>> spacer (I solved that by using the old spacer which luckily I
> still had
> >>>> on hand), and the stainless steel input line, due to its 90?
> fitting
> >>>> where one should have used a 45? fitting, twisted itself, unseen
> of
> >>>> course, within the bell housing when it was connected to the hard
> line
> >>>> attached to the chassis rails. Even stainless steel lines don't
> hold up
> >>>> very long against grinding by a pressure plate.
> >>>>
> >>>> The stainless steel bleed line is about 4 inches too long,
> sticking
> >>>> outside the bell housing in a terrible display of ugly.
> >>>>
> >>>> Finally, my last experience started with me ordering the same
> rebuild kit
> >>>> I had previously used, using the same number off of the previous
> invoice.
> >>>> What I received from them was the rebuild kit for the current unit
> which
> >>>> uses an entirely different set of all rings. I ultimately
> determined that
> >>>> for all three generations of their hydraulic bearing McLeod has
> used
> >>>> exactly the same rebuild kit part number. They added no suffix
> such as a
> >>>> ? A or a ?B which to me seems indicative of a problem within the
> company.
> >>>> No, they no longer support a rebuild kit for the first two
> generations.
> >>>>
> >>>> While you have some experience in using one of these previously,
> the task
> >>>> of establishing proper free play and clearances is quite exacting
> and
> >>>> unforgiving. If you get it wrong there is nothing left to do but
> pull the
> >>>> transaxle and start all over again.
> >>>>
> >>>> The unit I have is now adjusted for the factory shortcomings and
> as has
> >>>> been my experience for over 50,000 miles, the system works just
> fine.
> >>>> Dennis however no longer recommends their installation and based
> on my
> >>>> experience I would not encourage any other owners to venture down
> that
> >>>> road for themselves.
> >>>>
> >>>> Feel free to reach out to me off-line or by phone for more of the
> gory
> >>>> details.
> >>>>
> >>>> Larry
> >>>>
> >>>> Sent from me using a magic, handheld electronic gizmo.
> >>>> _______________________________________________
> >>>>
> >>>>
> >>>> Detomaso Email List is not managed by POCA
> >>>> Posted emails must not exceed 1.5 Megabytes
> >>>> DeTomaso mailing list
> >>>> [373]DeTomaso at server.detomasolist.com
> >>>> [116][374]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>>
> >>>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>>> the links above.
> >>>>
> >>>> Members who post to this list grant license to the list to forward
> any
> >>>> message posted here to all past, current, or future members of the
> list.
> >>>> They also grant the list owner permission to maintain an archive
> or
> >>>> approve the archiving of list messages.
> >>>
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA
> >>> Posted emails must not exceed 1.5 Megabytes
> >>> DeTomaso mailing list
> >>> [375]DeTomaso at server.detomasolist.com
> >>> [117][376]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >>> the links above.
> >>>
> >>> Members who post to this list grant license to the list to forward
> any
> >>> message posted here to all past, current, or future members of the
> list.
> >>> They also grant the list owner permission to maintain an archive or
> >>> approve the archiving of list messages.
> >>>
> >>
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [377]DeTomaso at server.detomasolist.com
> >> [118][378]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> >> the links above.
> >>
> >> Members who post to this list grant license to the list to forward
> any
> >> message posted here to all past, current, or future members of the
> list.
> >> They also grant the list owner permission to maintain an archive or
> approve
> >> the archiving of list messages.
> >>
> > -------------- next part --------------
> > well, I have the quicktime bellhousing for the ZF on 4653. I
> forgot to
> > mention that. Also didn't consider it would be relevant. hmmmm.
> >
> > On Fri, Sep 16, 2016 at 3:53 PM, Larry Stock
> > [379]<[1]larrys at panteraparts.com> wrote:
> >
> > The basic problem is that the bell housing is too confined and
> not
> > ventilated well enough to dissipate the heat. The Superformance
> is
> > using a
> > Quick Time bell housing that has much more ventilation than the
> > DeTomaso
> > Bell housing. Just another reason not to run those Plugs that
> some
> > vendors
> > offer, that close off the inspection hole at the left hand top
> of
> > the bell
> > housing. That is the only heat dissipation vent there is.
> > Larry
> > On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> > [380]<[2]detomaso-bounces at server.detomasolist.com on behalf of
> > [[381]3]will.kooiman at gmail.com> wrote:
> > >Wow.
> > >
> > >I have one in my Cobra, and so far it has worked perfectly.
> > >
> > >My Cobra came with an external slave from a Volvo that was
> readily
> > >available 20 years ago, but is now unobtanium.A Rather than
> > building a new
> > >bracket for a different slave, I switched to a McLeod slave.
> > >
> > >At any rate, as I said, it has worked perfectly - so far.
> > >
> > >--
> > >Will
> > >
> > >
> > >
> > >
> > >
> > >On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> > >[382]<[4]detomaso at server.detomasolist.com> wrote:
> > >
> > >>Cullen,
> > >>
> > >>2511 came equipped with one of those from Dennis when I
> purchased
> > it in
> > >>2002. Since then I have rebuilt the unit twice (three?) and
> most
> > recently
> > >>did so using what I believe to be their current offering. I
> spoke
> > with
> > >>and ordered directly from McLeod.
> > >>
> > >>My opinion, in brief, is a very simple "NO!!"
> > >>
> > >>The current offering was shipped to me with an incorrect
> input
> > snout
> > >>spacer (I solved that by using the old spacer which luckily I
> > still had
> > >>on hand), and the stainless steel input line, due to its
> 90ADEG
> > fitting
> > >>where one should have used a 45ADEG fitting, twisted itself,
> > unseen of
> > >>course, within the bell housing when it was connected to the
> hard
> > line
> > >>attached to the chassis rails. Even stainless steel lines
> don't
> > hold up
> > >>very long against grinding by a pressure plate.
> > >>
> > >>The stainless steel bleed line is about 4 inches too long,
> > sticking
> > >>outside the bell housing in a terrible display of ugly.
> > >>
> > >>Finally, my last experience started with me ordering the same
> > rebuild kit
> > >>I had previously used, using the same number off of the
> previous
> > invoice.
> > >>What I received from them was the rebuild kit for the current
> unit
> > which
> > >>uses an entirely different set of all rings. I ultimately
> > determined that
> > >>for all three generations of their hydraulic bearing McLeod
> has
> > used
> > >>exactly the same rebuild kit part number. They added no
> suffix
> > such as a
> > >>A A or a AB which to me seems indicative of a problem within
> the
> > company.
> > >>No, they no longer support a rebuild kit for the first two
> > generations.
> > >>
> > >>While you have some experience in using one of these
> previously,
> > the task
> > >>of establishing proper free play and clearances is quite
> exacting
> > and
> > >>unforgiving. If you get it wrong there is nothing left to do
> but
> > pull the
> > >>transaxle and start all over again.
> > >>
> > >>The unit I have is now adjusted for the factory shortcomings
> and
> > as has
> > >>been my experience for over 50,000 miles, the system works
> just
> > fine.
> > >>Dennis however no longer recommends their installation and
> based
> > on my
> > >>experience I would not encourage any other owners to venture
> down
> > that
> > >>road for themselves.
> > >>
> > >>Feel free to reach out to me off-line or by phone for more of
> the
> > gory
> > >>details.
> > >>
> > >>Larry
> > >>
> > >>Sent from me using a magic, handheld electronic gizmo.
> >
> > >>_______________________________________________
> > >>
> > >>
> > >>Detomaso Email List is not managed by POCA
> > >>Posted emails must not exceed 1.5 Megabytes
> > >>DeTomaso mailing list
> > >>[[383]5]DeTomaso at server.detomasolist.com
> > >>[6][384]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >>
> > >>To manage your subscription (change email address, unsubscribe,
> etc.)
> > use
> > >>the links above.
> > >>
> > >>Members who post to this list grant license to the list to
> forward
> > any
> > >>message posted here to all past, current, or future members of
> the
> > list.
> > >>They also grant the list owner permission to maintain an
> archive or
> > >>approve the archiving of list messages.
> > >
> > >
> > >_______________________________________________
> > >
> > >
> > >Detomaso Email List is not managed by POCA
> > >Posted emails must not exceed 1.5 Megabytes
> > >DeTomaso mailing list
> > >[[385]7]DeTomaso at server.detomasolist.com
> > >[8][386]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >
> > >To manage your subscription (change email address, unsubscribe,
> etc.)
> > use
> > >the links above.
> > >
> > >Members who post to this list grant license to the list to
> forward any
> > >message posted here to all past, current, or future members of
> the
> > list.
> > >They also grant the list owner permission to maintain an archive
> or
> > >approve the archiving of list messages.
> > >
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[387]9]DeTomaso at server.detomasolist.com
> > [10][388]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1. [119][389]mailto:larrys at panteraparts.com
> > 2. [120][390]mailto:detomaso-bounces at server.detomasolist.com
> > 3. [121][391]mailto:will.kooiman at gmail.com
> > 4. [122][392]mailto:detomaso at server.detomasolist.com
> > 5. [123][393]mailto:DeTomaso at server.detomasolist.com
> > 6. [124][394]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 7. [125][395]mailto:DeTomaso at server.detomasolist.com
> > 8. [126][396]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 9. [127][397]mailto:DeTomaso at server.detomasolist.com
> > 10. [128][398]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > ------------------------------
> >
> > Message: 21
> > Date: Fri, 16 Sep 2016 21:46:51 +0000
> > From: michael frazier [399]<red3644 at hotmail.com>
> > To: [400]"detomaso at server.detomasolist.com"
> > [401]<detomaso at server.detomasolist.com>
> > Subject: [DeTomaso] NPC, Need transmission suggestions
> > Message-ID:
> >
> [402]<SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07.prod.out
> look.com>
> >
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hi All,
> > I?m putting a 1951 Ford truck back on the road. It sat in a barn
> since 1961 and only has 25k miles,
> > but those were farm miles and it is beat though not rusted out.
> Beautiful Rat Rod patina that will
> > remain. The frame is boxed and cross braced, and holds a complete
> Jaguar XJ suspension front and back.
> > I plan to run a spare Cleveland, actually a real Boss 351, and want
> an overdrive transmission. Manual or
> > automatic, either one. It won?t be drag raced but will be used
> regularly and would likely be run in an
> > open road race some time. That?s the reason for the overdrive.
> >
> > I?ve been out of this part of the game for a while and was wondering
> what would work well.
> > What would bolt up and work. What would it come out of?
> >
> > Any info and ideas would be greatly appreciated.
> > Michael
> >
> > Sent from Mail<[129][403]https://go.microsoft.com/fwlink/?LinkId=550986>
> for Windows 10
> >
> > -------------- next part --------------
> > Hi All,
> >
> > I'm putting a 1951 Ford truck back on the road. It sat in a barn
> since
> > 1961 and only has 25k miles,
> >
> > but those were farm miles and it is beat though not rusted out.
> > Beautiful Rat Rod patina that will
> >
> > remain. The frame is boxed and cross braced, and holds a
> complete
> > Jaguar XJ suspension front and back.
> >
> > I plan to run a spare Cleveland, actually a real Boss 351, and
> want an
> > overdrive transmission. Manual or
> >
> > automatic, either one. It won't be drag raced but will be used
> > regularly and would likely be run in an
> >
> > open road race some time. That's the reason for the overdrive.
> >
> >
> > I've been out of this part of the game for a while and was
> wondering
> > what would work well.
> >
> > What would bolt up and work. What would it come out of?
> >
> >
> > Any info and ideas would be greatly appreciated.
> >
> > Michael
> >
> >
> > Sent from [1]Mail for Windows 10
> >
> > References
> >
> > 1. [130][404]https://go.microsoft.com/fwlink/?LinkId=550986
> >
> > ------------------------------
> >
> > Message: 22
> > Date: Fri, 16 Sep 2016 15:04:46 -0700
> > From: "David Nunn" [405]<dnunn at telus.net>
> > To: "'Mike Drew'" [406]<MikeLDrew at aol.com>, "'Julian Kift'"
> > [407]<julian_kift at hotmail.com>
> > Cc: [408]detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Message-ID: [409]<003301d21066$5739cc80$05ad6580$@telus.net>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Julian,
> >
> > Further to what Mike wrote; here's a photo of the front of my engine,
> with
> > both IPSCO items installed.
> >
> > David
> >
> >
> > -----Original Message-----
> > From: Mike Drew [[131][410]mailto:MikeLDrew at aol.com]
> > Sent: September 16, 2016 2:19 PM
> > To: Julian Kift [411]<julian_kift at hotmail.com>
> > Cc: David Nunn [412]<dnunn at telus.net>; [413]detomaso at server.detomasolist.co
> m
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > Julian,
> >
> > Yes, he mentioned two different products for different applications
> but only
> > had a link for the stock replacement idler. My photo shows the idler
> that
> > replaces the alternator to tension the water pump belt.
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 16, 2016, at 14:16, Julian Kift [414]<julian_kift at hotmail.com>
> wrote:
> >
> >> Mike,
> >>
> >> It gets even better, that looks to be a different idler again,
> the one
> >> that was previously linked appears to go in the stock location,
> but was
> >> adjustable from the front negating the usual need to get a wrench
> on
> >> the rear.
> >> Julian
> >>
> __________________________________________________________________
> >>
> >> From: DeTomaso [415]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> >> Mike Drew via DeTomaso [416]<detomaso at server.detomasolist.com>
> >> Sent: Friday, September 16, 2016 2:11 PM
> >> To: David Nunn
> >> Cc: [417]<detomaso at server.detomasolist.com>
> >> Subject: Re: [DeTomaso] Sanden Compressors noises
> >>
> >> All,
> >> Here is a photo of the IPSCO water pump idler pulley setup. Note
> there
> >> is no alternator in view, as this car is fitted with a flat
> firewall
> >> kit that moves the alternator outboard of the A/C system.
> >>
> [[418]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> >> Mike
> >> Sent from my iPhone
> >> On Sep 15, 2016, at 15:41, "David Nunn" [419]<dnunn at telus.net> wrote:
> >>> Rob,
> >>>
> >>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
> It
> >>> eliminates the "fitted", non-adjustable belt and makes it
> >> adjustable.
> >>> It sure makes installation a lot easier. It's not listed on
> IPSCO's
> >> web
> >>> site so you have to call or e-mail to get details.
> >>>
> >>> Also, IPSCO has an idler pulley kit that makes installation and
> >> belt
> >>> tensioning a breeze.
> >>>
> >>> [1][420]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >>>
> >>> References
> >>>
> >>> 1. [1][421]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> [2][Idler%20Pulley.jpg]
> >> [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
> >> [132]www.ipsco.org
> >> Pantera Idler Pulley Assembly . Replacement for factory Idler
> Pulley,
> >> this assembly allow adjustment without trying to hold a wrench
> behind
> >> the bracket to tighten in ...
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA Posted emails must not
> >>> exceed 1.5 Megabytes DeTomaso mailing list
> >>> [422]DeTomaso at server.detomasolist.com
> >>> [4][423]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >>> Members who post to this list grant license to the list to forward
> >> any message posted here to all past, current, or future members
> of the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >> _______________________________________________
> >> Detomaso Email List is not managed by POCA
> >> Posted emails must not exceed 1.5 Megabytes
> >> DeTomaso mailing list
> >> [424]DeTomaso at server.detomasolist.com
> >> [5][425]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> use the links above.
> >> Members who post to this list grant license to the list to
> forward any
> >> message posted here to all past, current, or future members of
> the
> >> list. They also grant the list owner permission to maintain an
> archive
> >> or approve the archiving of list messages.
> >>
> >> References
> >>
> >> 1. [133][426]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 2. [134][427]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 3. [135][428]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> 4. [136][429]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> 5. [137][430]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA Posted emails must not
> >> exceed 1.5 Megabytes DeTomaso mailing list
> >> [431]DeTomaso at server.detomasolist.com
> >> [138][432]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> > the links above.
> >> Members who post to this list grant license to the list to forward
> any
> > message posted here to all past, current, or future members of the
> list.
> > They also grant the list owner permission to maintain an archive or
> approve
> > the archiving of list messages.
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: AC bracket & pulleys_opt.jpg
> > Type: image/jpeg
> > Size: 219525 bytes
> > Desc: not available
> > URL:
> <[139][433]http://server.detomasolist.com/pipermail/detomaso/attachments/201
> 60916/e7e2256b/attachment-0001.jpg>
> >
> > ------------------------------
> >
> > Message: 23
> > Date: Fri, 16 Sep 2016 16:26:53 -0600
> > From: bill [434]<bill at incendium.com>
> > To: michael frazier [435]<red3644 at hotmail.com>,
> > [436]"detomaso at server.detomasolist.com"
> [437]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] NPC, Need transmission suggestions
> > Message-ID:
> [438]<asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Michael:Screw that put a Ford flat head V8 in that suckered.?
> >
> >
> >
> > CheersBill MooreCalgary
> > -------- Original message --------From: michael frazier
> [439]<red3644 at hotmail.com> Date: 2016-09-16 3:46 PM (GMT-07:00) To:
> [440]detomaso at server.detomasolist.com Subject: [DeTomaso] NPC, Need
> transmission suggestions
> > Hi All,
> > I?m putting a 1951 Ford truck back on the road.? It sat in a barn
> since 1961 and only has 25k miles,
> > but those were farm miles and it is beat though not rusted out.?
> Beautiful Rat Rod patina that will
> > remain.? The frame is boxed and cross braced, and holds a complete
> Jaguar XJ suspension front and back.
> > I plan to run a spare Cleveland, actually a real Boss 351, and want
> an overdrive transmission.? Manual or
> > automatic, either one.? It won?t be drag raced but will be used
> regularly and would likely be run in an
> > open road race some time.? That?s the reason for the overdrive.
> >
> > I?ve been out of this part of the game for a while and was wondering
> what would work well.
> > What would bolt up and work.? What would it come out of?
> >
> > Any info and ideas would be greatly appreciated.
> > Michael
> >
> > Sent from Mail<[140][441]https://go.microsoft.com/fwlink/?LinkId=550986>
> for Windows 10
> >
> >
> > ?? Hi All,
> >
> > ?? I'm putting a 1951 Ford truck back on the road.? It sat in a barn
> since
> > ?? 1961 and only has 25k miles,
> >
> > ?? but those were farm miles and it is beat though not rusted out.
> > ?? Beautiful Rat Rod patina that will
> >
> > ?? remain.? The frame is boxed and cross braced, and holds a complete
> > ?? Jaguar XJ suspension front and back.
> >
> > ?? I plan to run a spare Cleveland, actually a real Boss 351, and
> want an
> > ?? overdrive transmission.? Manual or
> >
> > ?? automatic, either one.? It won't be drag raced but will be used
> > ?? regularly and would likely be run in an
> >
> > ?? open road race some time.? That's the reason for the overdrive.
> >
> >
> > ?? I've been out of this part of the game for a while and was
> wondering
> > ?? what would work well.
> >
> > ?? What would bolt up and work.? What would it come out of?
> >
> >
> > ?? Any info and ideas would be greatly appreciated.
> >
> > ?? Michael
> >
> >
> > ?? Sent from [1]Mail for Windows 10
> >
> > References
> >
> > ?? 1. [141][442]https://go.microsoft.com/fwlink/?LinkId=550986
> >
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [443]DeTomaso at server.detomasolist.com
> > [142][444]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > Michael:
> >
> > Screw that put a Ford flat head V8 in that suckered.
> >
> > Cheers
> >
> > Bill Moore
> >
> > Calgary
> >
> > -------- Original message --------
> > From: michael frazier [445]<red3644 at hotmail.com>
> > Date: 2016-09-16 3:46 PM (GMT-07:00)
> > To: [446]detomaso at server.detomasolist.com
> > Subject: [DeTomaso] NPC, Need transmission suggestions
> >
> > Hi All,
> > I'm putting a 1951 Ford truck back on the road. It sat in a barn
> since
> > 1961 and only has 25k miles,
> > but those were farm miles and it is beat though not rusted out.
> > Beautiful Rat Rod patina that will
> > remain. The frame is boxed and cross braced, and holds a
> complete
> > Jaguar XJ suspension front and back.
> > I plan to run a spare Cleveland, actually a real Boss 351, and
> want an
> > overdrive transmission. Manual or
> > automatic, either one. It won't be drag raced but will be used
> > regularly and would likely be run in an
> > open road race some time. That's the reason for the overdrive.
> > I've been out of this part of the game for a while and was
> wondering
> > what would work well.
> > What would bolt up and work. What would it come out of?
> > Any info and ideas would be greatly appreciated.
> > Michael
> > Sent from
> Mail<[143][447]https://go.microsoft.com/fwlink/?LinkId=550986> for
> > Windows 10
> > Hi All,
> > I'm putting a 1951 Ford truck back on the road. It sat in a
> barn
> > since
> > 1961 and only has 25k miles,
> > but those were farm miles and it is beat though not rusted
> out.
> > Beautiful Rat Rod patina that will
> > remain. The frame is boxed and cross braced, and holds a
> complete
> > Jaguar XJ suspension front and back.
> > I plan to run a spare Cleveland, actually a real Boss 351, and
> want
> > an
> > overdrive transmission. Manual or
> > automatic, either one. It won't be drag raced but will be
> used
> > regularly and would likely be run in an
> > open road race some time. That's the reason for the
> overdrive.
> > I've been out of this part of the game for a while and was
> wondering
> > what would work well.
> > What would bolt up and work. What would it come out of?
> > Any info and ideas would be greatly appreciated.
> > Michael
> > Sent from [1]Mail for Windows 10
> > References
> > 1. [144][448]https://go.microsoft.com/fwlink/?LinkId=550986
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [449]DeTomaso at server.detomasolist.com
> > [145][450]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > ------------------------------
> >
> > Message: 24
> > Date: Fri, 16 Sep 2016 16:31:46 -0600
> > From: bill [451]<bill at incendium.com>
> > To: David Nunn [452]<dnunn at telus.net>, 'Mike Drew' [453]<MikeLDrew at aol.com>
> ,
> > 'Julian Kift' [454]<julian_kift at hotmail.com>
> > Cc: [455]detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Message-ID:
> [456]<twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Wow !,,,,
> > That looks to nice to cover up.....
> >
> >
> >
> >
> > CheersBill MooreCalgary
> > -------- Original message --------From: David Nunn [457]<dnunn at telus.net>
> Date: 2016-09-16 4:04 PM (GMT-07:00) To: 'Mike Drew'
> [458]<MikeLDrew at aol.com>, 'Julian Kift' [459]<julian_kift at hotmail.com> Cc:
> [460]detomaso at server.detomasolist.com Subject: Re: [DeTomaso] Sanden
> Compressors noises
> > Julian,
> >
> > Further to what Mike wrote; here's a photo of the front of my engine,
> with
> > both IPSCO items installed.
> >
> > David
> >
> >
> > -----Original Message-----
> > From: Mike Drew [[146][461]mailto:MikeLDrew at aol.com]
> > Sent: September 16, 2016 2:19 PM
> > To: Julian Kift [462]<julian_kift at hotmail.com>
> > Cc: David Nunn [463]<dnunn at telus.net>; [464]detomaso at server.detomasolist.co
> m
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > Julian,
> >
> > Yes, he mentioned two different products for different applications
> but only
> > had a link for the stock replacement idler. My photo shows the idler
> that
> > replaces the alternator to tension the water pump belt.
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 16, 2016, at 14:16, Julian Kift [465]<julian_kift at hotmail.com>
> wrote:
> >
> >> ?? Mike,
> >>
> >> ?? It gets even better, that looks to be a different idler again,
> the one
> >> ?? that was previously linked appears to go in the stock location,
> but was
> >> ?? adjustable from the front negating the usual need to get a wrench
> on
> >> ?? the rear.
> >> ?? Julian
> >> ????
> __________________________________________________________________
> >>
> >> ?? From: DeTomaso [466]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> >> ?? Mike Drew via DeTomaso [467]<detomaso at server.detomasolist.com>
> >> ?? Sent: Friday, September 16, 2016 2:11 PM
> >> ?? To: David Nunn
> >> ?? Cc: [468]<detomaso at server.detomasolist.com>
> >> ?? Subject: Re: [DeTomaso] Sanden Compressors noises
> >>
> >> ?? All,
> >> ?? Here is a photo of the IPSCO water pump idler pulley setup. Note
> there
> >> ?? is no alternator in view, as this car is fitted with a flat
> firewall
> >> ?? kit that moves the alternator outboard of the A/C system.
> >> ??
> [[469]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> >> ?? Mike
> >> ?? Sent from my iPhone
> >> ?? On Sep 15, 2016, at 15:41, "David Nunn" [470]<dnunn at telus.net> wrote:
> >>> ? Rob,
> >>>
> >>> ? If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
> It?
> >>> eliminates the "fitted", non-adjustable belt and makes it
> >> ?? adjustable.
> >>> ? It sure makes installation a lot easier. It's not listed on
> IPSCO's
> >> ?? web
> >>> ? site so you have to call or e-mail to get details.
> >>>
> >>> ? Also, IPSCO has an idler pulley kit that makes installation and
> >> ?? belt
> >>> ? tensioning a breeze.
> >>>
> >>> ? [1][471]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >>>
> >>> References
> >>>
> >>> ? 1. [1][472]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> ?? [2][Idler%20Pulley.jpg]
> >> ?? [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
> >> ?? [147]www.ipsco.org
> >> ?? Pantera Idler Pulley Assembly . Replacement for factory Idler
> Pulley,
> >> ?? this assembly allow adjustment without trying to hold a wrench
> behind
> >> ?? the bracket to tighten in ...
> >>> _______________________________________________
> >>>
> >>>
> >>> Detomaso Email List is not managed by POCA Posted emails must not
> >>> exceed 1.5 Megabytes DeTomaso mailing list
> >>> [473]DeTomaso at server.detomasolist.com
> >>> [4][474]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>>
> >>> To manage your subscription (change email address, unsubscribe,
> etc.)
> >> ?? use the links above.
> >>> Members who post to this list grant license to the list to forward
> >> ?? any message posted here to all past, current, or future members
> of the
> >> ?? list. They also grant the list owner permission to maintain an
> archive
> >> ?? or approve the archiving of list messages.
> >> ?? _______________________________________________
> >> ?? Detomaso Email List is not managed by POCA
> >> ?? Posted emails must not exceed 1.5 Megabytes
> >> ?? DeTomaso mailing list
> >> ?? [475]DeTomaso at server.detomasolist.com
> >> ?? [5][476]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> ?? To manage your subscription (change email address, unsubscribe,
> etc.)
> >> ?? use the links above.
> >> ?? Members who post to this list grant license to the list to
> forward any
> >> ?? message posted here to all past, current, or future members of
> the
> >> ?? list. They also grant the list owner permission to maintain an
> archive
> >> ?? or approve the archiving of list messages.
> >>
> >> References
> >>
> >> ?? 1. [148][477]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> ?? 2. [149][478]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> ?? 3. [150][479]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> >> ?? 4. [151][480]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> ?? 5. [152][481]http://server.detomasolist.com/mailman/listinfo/detomaso
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA Posted emails must not
> >> exceed 1.5 Megabytes DeTomaso mailing list
> >> [482]DeTomaso at server.detomasolist.com
> >> [153][483]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >> To manage your subscription (change email address, unsubscribe,
> etc.) use
> > the links above.
> >> Members who post to this list grant license to the list to forward
> any
> > message posted here to all past, current, or future members of the
> list.
> > They also grant the list owner permission to maintain an archive or
> approve
> > the archiving of list messages.
> >
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [484]DeTomaso at server.detomasolist.com
> > [154][485]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> > -------------- next part --------------
> > Wow !,,,,
> >
> > That looks to nice to cover up.....
> >
> > Cheers
> >
> > Bill Moore
> >
> > Calgary
> >
> > -------- Original message --------
> > From: David Nunn [486]<dnunn at telus.net>
> > Date: 2016-09-16 4:04 PM (GMT-07:00)
> > To: 'Mike Drew' [487]<MikeLDrew at aol.com>, 'Julian Kift'
> > [488]<julian_kift at hotmail.com>
> > Cc: [489]detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > Julian,
> > Further to what Mike wrote; here's a photo of the front of my
> engine,
> > with
> > both IPSCO items installed.
> > David
> > -----Original Message-----
> > From: Mike Drew [[155][490]mailto:MikeLDrew at aol.com]
> > Sent: September 16, 2016 2:19 PM
> > To: Julian Kift [491]<julian_kift at hotmail.com>
> > Cc: David Nunn [492]<dnunn at telus.net>;
> [493]detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> > Julian,
> > Yes, he mentioned two different products for different
> applications but
> > only
> > had a link for the stock replacement idler. My photo shows the
> idler
> > that
> > replaces the alternator to tension the water pump belt.
> > Mike
> > Sent from my iPhone
> > On Sep 16, 2016, at 14:16, Julian Kift [494]<julian_kift at hotmail.com>
> wrote:
> > > Mike,
> > >
> > > It gets even better, that looks to be a different idler
> again, the
> > one
> > > that was previously linked appears to go in the stock
> location, but
> > was
> > > adjustable from the front negating the usual need to get a
> wrench
> > on
> > > the rear.
> > > Julian
> > >
> >
> __________________________________________________________________
> > >
> > > From: DeTomaso [495]<detomaso-bounces at server.detomasolist.com> on
> behalf
> > of
> > > Mike Drew via DeTomaso [496]<detomaso at server.detomasolist.com>
> > > Sent: Friday, September 16, 2016 2:11 PM
> > > To: David Nunn
> > > Cc: [497]<detomaso at server.detomasolist.com>
> > > Subject: Re: [DeTomaso] Sanden Compressors noises
> > >
> > > All,
> > > Here is a photo of the IPSCO water pump idler pulley setup.
> Note
> > there
> > > is no alternator in view, as this car is fitted with a flat
> > firewall
> > > kit that moves the alternator outboard of the A/C system.
> > >
> >
> [[498]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com]
> > > Mike
> > > Sent from my iPhone
> > > On Sep 15, 2016, at 15:41, "David Nunn" [499]<dnunn at telus.net>
> wrote:
> > >> Rob,
> > >>
> > >> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's
> kit.
> > It
> > >> eliminates the "fitted", non-adjustable belt and makes it
> > > adjustable.
> > >> It sure makes installation a lot easier. It's not listed on
> IPSCO's
> > > web
> > >> site so you have to call or e-mail to get details.
> > >>
> > >> Also, IPSCO has an idler pulley kit that makes installation
> and
> > > belt
> > >> tensioning a breeze.
> > >>
> > >> [1][500]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > >>
> > >> References
> > >>
> > >> 1. [1][501]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > > [2][Idler%20Pulley.jpg]
> > > [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking
> ...
> > > [156]www.ipsco.org
> > > Pantera Idler Pulley Assembly . Replacement for factory Idler
> > Pulley,
> > > this assembly allow adjustment without trying to hold a
> wrench
> > behind
> > > the bracket to tighten in ...
> > >> _______________________________________________
> > >>
> > >>
> > >> Detomaso Email List is not managed by POCA Posted emails must
> not
> > >> exceed 1.5 Megabytes DeTomaso mailing list
> > >> [502]DeTomaso at server.detomasolist.com
> > >> [4][503]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >>
> > >> To manage your subscription (change email address,
> unsubscribe,
> > etc.)
> > > use the links above.
> > >>
> > >> Members who post to this list grant license to the list to
> forward
> > > any message posted here to all past, current, or future
> members of
> > the
> > > list. They also grant the list owner permission to maintain
> an
> > archive
> > > or approve the archiving of list messages.
> > > _______________________________________________
> > > Detomaso Email List is not managed by POCA
> > > Posted emails must not exceed 1.5 Megabytes
> > > DeTomaso mailing list
> > > [504]DeTomaso at server.detomasolist.com
> > > [5][505]http://server.detomasolist.com/mailman/listinfo/detomaso
> > > To manage your subscription (change email address,
> unsubscribe,
> > etc.)
> > > use the links above.
> > > Members who post to this list grant license to the list to
> forward
> > any
> > > message posted here to all past, current, or future members
> of the
> > > list. They also grant the list owner permission to maintain
> an
> > archive
> > > or approve the archiving of list messages.
> > >
> > > References
> > >
> > > 1.
> [157][506]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > > 2.
> [158][507]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > > 3.
> [159][508]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > > 4.
> [160][509]http://server.detomasolist.com/mailman/listinfo/detomaso
> > > 5.
> [161][510]http://server.detomasolist.com/mailman/listinfo/detomaso
> > > _______________________________________________
> > >
> > >
> > > Detomaso Email List is not managed by POCA Posted emails must
> not
> > > exceed 1.5 Megabytes DeTomaso mailing list
> > > [511]DeTomaso at server.detomasolist.com
> > > [162][512]http://server.detomasolist.com/mailman/listinfo/detomaso
> > >
> > > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use
> > the links above.
> > >
> > > Members who post to this list grant license to the list to
> forward
> > any
> > message posted here to all past, current, or future members of
> the
> > list.
> > They also grant the list owner permission to maintain an archive
> or
> > approve
> > the archiving of list messages.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [513]DeTomaso at server.detomasolist.com
> > [163][514]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> forward any
> > message posted here to all past, current, or future members of
> the
> > list. They also grant the list owner permission to maintain an
> archive
> > or approve the archiving of list messages.
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [515]DeTomaso at server.detomasolist.com
> > [164][516]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
> >
> >
> > ------------------------------
> >
> > End of DeTomaso Digest, Vol 147, Issue 19
> > *****************************************
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [517]DeTomaso at server.detomasolist.com
> [165][518]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. [519]http://server.detomasolist.com/mailman/listinfo/detomaso
> 2. [520]http://server.detomasolist.com/mailman/listinfo/detomaso
> 3. [521]mailto:thimes at jpl.nasa.gov
> 4. [522]http://server.detomasolist.com/mailman/listinfo/detomaso
> 5. [523]mailto:thimes at jpl.nasa.gov
> 6. [524]mailto:detomaso-bounces at server.detomasolist.com
> 7. [525]mailto:demongusta at gmail.com
> 8. [526]mailto:detomaso at server.detomasolist.com
> 9. [527]mailto:detomaso at server.detomasolist.com
> 10. [528]mailto:detomaso at server.detomasolist.com
> 11. [529]mailto:detomaso at server.detomasolist.com
> 12. [530]mailto:DeTomaso at server.detomasolist.com
> 13. [531]http://server.detomasolist.com/mailman/listinfo/detomaso
> 14. [532]http://server.detomasolist.com/mailman/listinfo/detomaso
> 15. [533]http://centralwines.com/
> 16. [534]http://facebook.com/CentralLiquors
> 17. [535]mailto:DeTomaso at server.detomasolist.com
> 18. [536]http://server.detomasolist.com/mailman/listinfo/detomaso
> 19. [537]mailto:thimes at jpl.nasa.gov
> 20. [538]mailto:detomaso-bounces at server.detomasolist.com
> 21. [539]mailto:demongusta at gmail.com
> 22. [540]mailto:detomaso at server.detomasolist.com
> 23. [541]mailto:detomaso at server.detomasolist.com
> 24. [542]mailto:detomaso at server.detomasolist.com
> 25. [543]mailto:detomaso at server.detomasolist.com
> 26. [544]mailto:DeTomaso at server.detomasolist.com
> 27. [545]http://server.detomasolist.com/mailman/listinfo/detomaso
> 28. [546]http://server.detomasolist.com/mailman/listinfo/detomaso
> 29. [547]mailto:terry.himes at jpl.nasa.gov
> 30. [548]mailto:thimes at jpl.nasa.gov
> 31. [549]mailto:detomaso-bounces at server.detomasolist.com
> 32. [550]mailto:demongusta at gmail.com
> 33. [551]mailto:detomaso at server.detomasolist.com
> 34. [552]mailto:detomaso at server.detomasolist.com
> 35. [553]mailto:detomaso at server.detomasolist.com
> 36. [554]mailto:detomaso at server.detomasolist.com
> 37. [555]mailto:DeTomaso at server.detomasolist.com
> 38. [556]http://server.detomasolist.com/mailman/listinfo/detomaso
> 39. [557]http://server.detomasolist.com/mailman/listinfo/detomaso
> 40. [558]http://www.PanteraParts.com/
> 41. [559]http://server.detomasolist.com/mailman/listinfo/detomaso
> 42. [560]https://www.summitracing.com/parts/mcl-1402-22
> 43. [561]https://www.summitracing.com/parts/mcl-1402-22
> 44. [562]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/unive
> rsal/primary-fans.html
> 45. [563]http://server.detomasolist.com/mailman/listinfo/detomaso
> 46. [564]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/unive
> rsal/primary-fans.html
> 47. [565]mailto:DeTomaso at server.detomasolist.com
> 48. [566]http://server.detomasolist.com/mailman/listinfo/detomaso
> 49. [567]http://centralwines.com/
> 50. [568]http://facebook.com/CentralLiquors
> 51. [569]mailto:DeTomaso at server.detomasolist.com
> 52. [570]http://server.detomasolist.com/mailman/listinfo/detomaso
> 53. [571]http://centralwines.com/
> 54. [572]http://facebook.com/CentralLiquors
> 55. [573]mailto:mycars at comcast.net
> 56. [574]mailto:detomaso at server.detomasolist.com
> 57. [575]mailto:DeTomaso at server.detomasolist.com
> 58. [576]http://server.detomasolist.com/mailman/listinfo/detomaso
> 59. [577]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.h
> tml
> 60. [578]http://centralwines.com/
> 61. [579]http://facebook.com/CentralLiquors
> 62. [580]mailto:mycars at comcast.net
> 63. [581]mailto:detomaso at server.detomasolist.com
> 64. [582]mailto:DeTomaso at server.detomasolist.com
> 65. [583]http://server.detomasolist.com/mailman/listinfo/detomaso
> 66. [584]http://server.detomasolist.com/mailman/listinfo/detomaso
> 67. [585]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.h
> tml
> 68. [586]mailto:mycars at comcast.net
> 69. [587]mail[588]mailto:4]detomaso at server.detomasolist.com
> 70. [589]mail[590]mailto:5]DeTomaso at server.detomasolist.com
> 71. [591]http://server.detomasolist.com/mailman/listinfo/detomaso
> 72. [592]http://centralwines.com/
> 73. [593]http://facebook.com/CentralLiquors
> 74. [594]mailto:mycars at comcast.net
> 75. [595]mailto:detomaso at server.detomasolist.com
> 76. [596]mailto:DeTomaso at server.detomasolist.com
> 77. [597]http://server.detomasolist.com/mailman/listinfo/detomaso
> 78. [598]mailto:DeTomaso at server.detomasolist.com
> 79. [599]http://server.detomasolist.com/mailman/listinfo/detomaso
> 80. [600]http://server.detomasolist.com/mailman/listinfo/detomaso
> 81. [601]http://server.detomasolist.com/mailman/listinfo/detomaso
> 82. [602]http://server.detomasolist.com/mailman/listinfo/detomaso
> 83. [603]mailto:will.kooiman at gmail.com
> 84. [604]mailto:detomaso at server.detomasolist.com
> 85. [605]mailto:DeTomaso at server.detomasolist.com
> 86. [606]http://server.detomasolist.com/mailman/listinfo/detomaso
> 87. [607]mailto:DeTomaso at server.detomasolist.com
> 88. [608]http://server.detomasolist.com/mailman/listinfo/detomaso
> 89. [609]http://server.detomasolist.com/mailman/listinfo/detomaso
> 90. [610]http://server.detomasolist.com/mailman/listinfo/detomaso
> 91. [611]http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
> 6/33a69e52/attachment-0001.jpeg
> 92. [612]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 93. [613]http://server.detomasolist.com/mailman/listinfo/detomaso
> 94. [614]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 95. [615]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg]<[616]http://
> www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 96. [617]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 97. [618]http://www.ipsco.org/
> 98. [619]http://server.detomasolist.com/mailman/listinfo/detomaso
> 99. [620]http://server.detomasolist.com/mailman/listinfo/detomaso
> 100. [621]http://www.ipsco.org/
> 101. [622]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 102. [623]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 103. [624]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 104. [625]http://server.detomasolist.com/mailman/listinfo/detomaso
> 105. [626]http://server.detomasolist.com/mailman/listinfo/detomaso
> 106. [627]http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
> 6/ed6ee2dd/attachment-0001.jpeg
> 107. [628]http://www.ipsco.org/
> 108. [629]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 109. [630]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 110. [631]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 111. [632]http://server.detomasolist.com/mailman/listinfo/detomaso
> 112. [633]http://server.detomasolist.com/mailman/listinfo/detomaso
> 113. [634]http://server.detomasolist.com/mailman/listinfo/detomaso
> 114. [635]http://server.detomasolist.com/mailman/listinfo/detomaso
> 115. [636]http://server.detomasolist.com/mailman/listinfo/detomaso
> 116. [637]http://server.detomasolist.com/mailman/listinfo/detomaso
> 117. [638]http://server.detomasolist.com/mailman/listinfo/detomaso
> 118. [639]http://server.detomasolist.com/mailman/listinfo/detomaso
> 119. [640]mailto:larrys at panteraparts.com
> 120. [641]mailto:detomaso-bounces at server.detomasolist.com
> 121. [642]mailto:will.kooiman at gmail.com
> 122. [643]mailto:detomaso at server.detomasolist.com
> 123. [644]mailto:DeTomaso at server.detomasolist.com
> 124. [645]http://server.detomasolist.com/mailman/listinfo/detomaso
> 125. [646]mailto:DeTomaso at server.detomasolist.com
> 126. [647]http://server.detomasolist.com/mailman/listinfo/detomaso
> 127. [648]mailto:DeTomaso at server.detomasolist.com
> 128. [649]http://server.detomasolist.com/mailman/listinfo/detomaso
> 129. [650]https://go.microsoft.com/fwlink/?LinkId=550986
> 130. [651]https://go.microsoft.com/fwlink/?LinkId=550986
> 131. [652]mailto:MikeLDrew at aol.com
> 132. [653]http://www.ipsco.org/
> 133. [654]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 134. [655]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 135. [656]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 136. [657]http://server.detomasolist.com/mailman/listinfo/detomaso
> 137. [658]http://server.detomasolist.com/mailman/listinfo/detomaso
> 138. [659]http://server.detomasolist.com/mailman/listinfo/detomaso
> 139. [660]http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
> 6/e7e2256b/attachment-0001.jpg
> 140. [661]https://go.microsoft.com/fwlink/?LinkId=550986
> 141. [662]https://go.microsoft.com/fwlink/?LinkId=550986
> 142. [663]http://server.detomasolist.com/mailman/listinfo/detomaso
> 143. [664]https://go.microsoft.com/fwlink/?LinkId=550986
> 144. [665]https://go.microsoft.com/fwlink/?LinkId=550986
> 145. [666]http://server.detomasolist.com/mailman/listinfo/detomaso
> 146. [667]mailto:MikeLDrew at aol.com
> 147. [668]http://www.ipsco.org/
> 148. [669]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 149. [670]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 150. [671]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 151. [672]http://server.detomasolist.com/mailman/listinfo/detomaso
> 152. [673]http://server.detomasolist.com/mailman/listinfo/detomaso
> 153. [674]http://server.detomasolist.com/mailman/listinfo/detomaso
> 154. [675]http://server.detomasolist.com/mailman/listinfo/detomaso
> 155. [676]mailto:MikeLDrew at aol.com
> 156. [677]http://www.ipsco.org/
> 157. [678]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 158. [679]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 159. [680]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 160. [681]http://server.detomasolist.com/mailman/listinfo/detomaso
> 161. [682]http://server.detomasolist.com/mailman/listinfo/detomaso
> 162. [683]http://server.detomasolist.com/mailman/listinfo/detomaso
> 163. [684]http://server.detomasolist.com/mailman/listinfo/detomaso
> 164. [685]http://server.detomasolist.com/mailman/listinfo/detomaso
> 165. [686]http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [687]DeTomaso at server.detomasolist.com
> [688]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the li
> nks above.
>
> Members who post to this list grant license to the list to forward any message p
> osted here to all past, current, or future members of the list. They also grant
> the list owner permission to maintain an archive or approve the archiving of lis
> t messages.
>
> References
>
> 1. mailto:detomaso-bounces at server.detomasolist.com
> 2. mailto:owen at tadhgcooke.com
> 3. mailto:detomaso at server.detomasolist.com
> 4. mailto:detomaso-request at server.detomasolist.com
> 5. mailto:detomaso at server.detomasolist.com
> 6. http://server.detomasolist.com/mailman/listinfo/detomaso
> 7. mailto:detomaso-request at server.detomasolist.com
> 8. mailto:detomaso-owner at server.detomasolist.com
> 9. mailto:demongusta at gmail.com
> 10. mailto:detomaso at server.detomasolist.com
> 11. mailto:detomaso at server.detomasolist.com
> 12. mailto:detomaso at server.detomasolist.com
> 13. mailto:detomaso at server.detomasolist.com
> 14. mailto:CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com
> 15. mailto:terry.himes at jpl.nasa.gov
> 16. mailto:demongusta at gmail.com
> 17. mailto:detomaso at server.detomasolist.com
> 18. mailto:detomaso at server.detomasolist.com
> 19. mailto:D4016E9F.92F3B%thimes at jpl.nasa.gov
> 20. mailto:thimes at jpl.nasa.gov
> 21. mailto:thimes at jpl.nasa.gov
> 22. mailto:detomaso-bounces at server.detomasolist.com
> 23. mailto:detomaso-bounces at server.detomasolist.com
> 24. mailto:demongusta at gmail.com
> 25. mailto:demongusta at gmail.com
> 26. mailto:detomaso at server.detomasolist.com
> 27. mailto:detomaso at server.detomasolist.com
> 28. mailto:detomaso at server.detomasolist.com
> 29. mailto:detomaso at server.detomasolist.com
> 30. mailto:detomaso at server.detomasolist.com
> 31. mailto:detomaso at server.detomasolist.com
> 32. mailto:detomaso at server.detomasolist.com
> 33. mailto:detomaso at server.detomasolist.com
> 34. mailto:DeTomaso at server.detomasolist.com
> 35. mailto:DeTomaso at server.detomasolist.com
> 36. http://server.detomasolist.com/mailman/listinfo/detomaso
> 37. mailto:1]thimes at jpl.nasa.gov
> 38. mailto:[2]detomaso-bounces at server.detomasolist.com
> 39. mailto:[3]demongusta at gmail.com
> 40. mailto:[4]detomaso at server.detomasolist.com
> 41. mailto:[5]detomaso at server.detomasolist.com
> 42. mailto:[6]detomaso at server.detomasolist.com
> 43. mailto:[7]detomaso at server.detomasolist.com
> 44. mailto:8]DeTomaso at server.detomasolist.com
> 45. http://server.detomasolist.com/mailman/listinfo/detomaso
> 46. mailto:thimes at jpl.nasa.gov
> 47. mailto:detomaso-bounces at server.detomasolist.com
> 48. mailto:demongusta at gmail.com
> 49. mailto:detomaso at server.detomasolist.com
> 50. mailto:detomaso at server.detomasolist.com
> 51. mailto:detomaso at server.detomasolist.com
> 52. mailto:detomaso at server.detomasolist.com
> 53. mailto:DeTomaso at server.detomasolist.com
> 54. http://server.detomasolist.com/mailman/listinfo/detomaso
> 55. mailto:mycars at comcast.net
> 56. mailto:detomaso at server.detomasolist.com
> 57. mailto:6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net
> 58. mailto:lashdeep at yahoo.com
> 59. mailto:mycars at comcast.net
> 60. mailto:detomaso at server.detomasolist.com
> 61. mailto:detomaso at server.detomasolist.com
> 62. mailto:1287234121.1004140.1474045730621 at mail.yahoo.com
> 63. mailto:mycars at comcast.net
> 64. mailto:detomaso at server.detomasolist.com
> 65. mailto:DeTomaso at server.detomasolist.com
> 66. http://server.detomasolist.com/mailman/listinfo/detomaso
> 67. mailto:mycars at comcast.net
> 68. mailto:detomaso at server.detomasolist.com
> 69. mailto:3]DeTomaso at server.detomasolist.com
> 70. http://server.detomasolist.com/mailman/listinfo/detomaso
> 71. http://centralwines.com/
> 72. http://facebook.com/CentralLiquors
> 73. mailto:DeTomaso at server.detomasolist.com
> 74. http://server.detomasolist.com/mailman/listinfo/detomaso
> 75. mailto:demongusta at gmail.com
> 76. mailto:terry.himes at jpl.nasa.gov
> 77. mailto:detomaso at server.detomasolist.com
> 78. mailto:detomaso at server.detomasolist.com
> 79. mailto:09791B61-DE0D-40CC-859D-437A8528952A at gmail.com
> 80. mailto:terry.himes at jpl.nasa.gov
> 81. mailto:thimes at jpl.nasa.gov
> 82. mailto:thimes at jpl.nasa.gov
> 83. mailto:detomaso-bounces at server.detomasolist.com
> 84. mailto:detomaso-bounces at server.detomasolist.com
> 85. mailto:demongusta at gmail.com
> 86. mailto:demongusta at gmail.com
> 87. mailto:detomaso at server.detomasolist.com
> 88. mailto:detomaso at server.detomasolist.com
> 89. mailto:detomaso at server.detomasolist.com
> 90. mailto:detomaso at server.detomasolist.com
> 91. mailto:detomaso at server.detomasolist.com
> 92. mailto:detomaso at server.detomasolist.com
> 93. mailto:detomaso at server.detomasolist.com
> 94. mailto:detomaso at server.detomasolist.com
> 95. mailto:DeTomaso at server.detomasolist.com
> 96. mailto:DeTomaso at server.detomasolist.com
> 97. http://server.detomasolist.com/mailman/listinfo/detomaso
> 98. http://server.detomasolist.com/mailman/listinfo/detomaso
> 99. mailto:[1]terry.himes at jpl.nasa.gov
> 100. mailto:2]thimes at jpl.nasa.gov
> 101. mailto:[3]detomaso-bounces at server.detomasolist.com
> 102. mailto:[4]demongusta at gmail.com
> 103. mailto:[5]detomaso at server.detomasolist.com
> 104. mailto:[6]detomaso at server.detomasolist.com
> 105. mailto:[7]detomaso at server.detomasolist.com
> 106. mailto:[8]detomaso at server.detomasolist.com
> 107. mailto:9]DeTomaso at server.detomasolist.com
> 108. http://server.detomasolist.com/mailman/listinfo/detomaso
> 109. mailto:terry.himes at jpl.nasa.gov
> 110. mailto:thimes at jpl.nasa.gov
> 111. mailto:detomaso-bounces at server.detomasolist.com
> 112. mailto:demongusta at gmail.com
> 113. mailto:detomaso at server.detomasolist.com
> 114. mailto:detomaso at server.detomasolist.com
> 115. mailto:detomaso at server.detomasolist.com
> 116. mailto:detomaso at server.detomasolist.com
> 117. mailto:DeTomaso at server.detomasolist.com
> 118. http://server.detomasolist.com/mailman/listinfo/detomaso
> 119. mailto:demongusta at gmail.com
> 120. mailto:GR2835 at comcast.net
> 121. mailto:detomaso at server.detomasolist.com
> 122. mailto:detomaso at server.detomasolist.com
> 123. mailto:2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com
> 124. mailto:GR2835 at comcast.net
> 125. mailto:demongusta at gmail.com
> 126. mailto:detomaso at server.detomasolist.com
> 127. mailto:detomaso at server.detomasolist.com
> 128. mailto:DeTomaso at server.detomasolist.com
> 129. http://server.detomasolist.com/mailman/listinfo/detomaso
> 130. mailto:larrys at panteraparts.com
> 131. mailto:demongusta at gmail.com
> 132. mailto:detomaso at server.detomasolist.com
> 133. mailto:detomaso at server.detomasolist.com
> 134. mailto:D4018324.17A0EF%larrys at panteraparts.com
> 135. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
> 136. mailto:demongusta at gmail.com
> 137. mailto:DeTomaso at server.detomasolist.com
> 138. http://server.detomasolist.com/mailman/listinfo/detomaso
> 139. mailto:cmccann1972 at gmail.com
> 140. mailto:detomaso at server.detomasolist.com
> 141. mailto:CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail.com
> 142. https://www.summitracing.com/parts/mcl-1402-22
> 143. https://www.summitracing.com/parts/mcl-1402-22
> 144. https://www.summitracing.com/parts/mcl-1402-22
> 145. mailto:kenn_green at yahoo.com
> 146. mailto:demongusta at gmail.com
> 147. mailto:detomaso at server.detomasolist.com
> 148. mailto:detomaso at server.detomasolist.com
> 149. mailto:1796334072.2409059.1474054066544 at mail.yahoo.com
> 150. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
> 151. mailto:demongusta at gmail.com
> 152. mailto:detomaso at server.detomasolist.com
> 153. mailto:detomaso at server.detomasolist.com
> 154. mailto:detomaso at server.detomasolist.com
> 155. mailto:detomaso at server.detomasolist.com
> 156. mailto:DeTomaso at server.detomasolist.com
> 157. http://server.detomasolist.com/mailman/listinfo/detomaso
> 158. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
> 159. mailto:demongusta at gmail.com
> 160. mailto:detomaso at server.detomasolist.com
> 161. mailto:detomaso at server.detomasolist.com
> 162. mailto:detomaso at server.detomasolist.com
> 163. mailto:detomaso at server.detomasolist.com
> 164. mailto:2]DeTomaso at server.detomasolist.com
> 165. http://server.detomasolist.com/mailman/listinfo/detomaso
> 166. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
> 167. mailto:DeTomaso at server.detomasolist.com
> 168. http://server.detomasolist.com/mailman/listinfo/detomaso
> 169. mailto:fresnofinches at aol.com
> 170. mailto:detomaso at server.detomasolist.com
> 171. mailto:6C366701-6502-47C0-A0DC-59494515D156 at aol.com
> 172. mailto:mycars at comcast.net
> 173. mailto:lashdeep at yahoo.com
> 174. mailto:detomaso at server.detomasolist.com
> 175. mailto:detomaso at server.detomasolist.com
> 176. mailto:37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net
> 177. http://centralwines.com/
> 178. http://facebook.com/CentralLiquors
> 179. mailto:mycars at comcast.net
> 180. mailto:detomaso at server.detomasolist.com
> 181. mailto:DeTomaso at server.detomasolist.com
> 182. mailto:DeTomaso at server.detomasolist.com
> 183. http://server.detomasolist.com/mailman/listinfo/detomaso
> 184. mailto:mycars at comcast.net
> 185. mailto:4]detomaso at server.detomasolist.com
> 186. mailto:5]DeTomaso at server.detomasolist.com
> 187. http://server.detomasolist.com/mailman/listinfo/detomaso
> 188. http://centralwines.com/
> 189. http://facebook.com/CentralLiquors
> 190. mailto:mycars at comcast.net
> 191. mailto:detomaso at server.detomasolist.com
> 192. mailto:DeTomaso at server.detomasolist.com
> 193. http://server.detomasolist.com/mailman/listinfo/detomaso
> 194. mailto:mycars at comcast.net
> 195. mailto:detomaso at server.detomasolist.com
> 196. mailto:013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net
> 197. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
> 198. mailto:mycars at comcast.net
> 199. mailto:4]detomaso at server.detomasolist.com
> 200. mailto:5]DeTomaso at server.detomasolist.com
> 201. http://server.detomasolist.com/mailman/listinfo/detomaso
> 202. http://centralwines.com/
> 203. http://facebook.com/CentralLiquors
> 204. mailto:mycars at comcast.net
> 205. mailto:detomaso at server.detomasolist.com
> 206. mailto:DeTomaso at server.detomasolist.com
> 207. http://server.detomasolist.com/mailman/listinfo/detomaso
> 208. mailto:DeTomaso at server.detomasolist.com
> 209. http://server.detomasolist.com/mailman/listinfo/detomaso
> 210. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
> 211. mailto:mycars at comcast.net
> 212. mailto:3]4]detomaso at server.detomasolist.com
> 213. mailto:4]5]DeTomaso at server.detomasolist.com
> 214. http://server.detomasolist.com/mailman/listinfo/detomaso
> 215. http://centralwines.com/
> 216. http://facebook.com/CentralLiquors
> 217. mailto:mycars at comcast.net
> 218. mailto:detomaso at server.detomasolist.com
> 219. mailto:DeTomaso at server.detomasolist.com
> 220. http://server.detomasolist.com/mailman/listinfo/detomaso
> 221. mailto:12]DeTomaso at server.detomasolist.com
> 222. http://server.detomasolist.com/mailman/listinfo/detomaso
> 223. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
> 224. mailto:mycars at comcast.net
> 225. mailto:4
> 226. mailto:69]mailto:4]detomaso at server.detomasolist.com
> 227. mailto:5
> 228. mailto:70]mailto:5]DeTomaso at server.detomasolist.com
> 229. http://server.detomasolist.com/mailman/listinfo/detomaso
> 230. http://centralwines.com/
> 231. http://facebook.com/CentralLiquors
> 232. mailto:mycars at comcast.net
> 233. mailto:detomaso at server.detomasolist.com
> 234. mailto:DeTomaso at server.detomasolist.com
> 235. http://server.detomasolist.com/mailman/listinfo/detomaso
> 236. mailto:DeTomaso at server.detomasolist.com
> 237. http://server.detomasolist.com/mailman/listinfo/detomaso
> 238. mailto:will.kooiman at gmail.com
> 239. mailto:fresnofinches at aol.com
> 240. mailto:detomaso at server.detomasolist.com
> 241. mailto:D401CD29.16A666%will.kooiman at gmail.com
> 242. mailto:detomaso at server.detomasolist.com
> 243. mailto:DeTomaso at server.detomasolist.com
> 244. http://server.detomasolist.com/mailman/listinfo/detomaso
> 245. mailto:cmccann1972 at gmail.com
> 246. mailto:will.kooiman at gmail.com
> 247. mailto:detomaso at server.detomasolist.com
> 248. mailto:fresnofinches at aol.com
> 249. mailto:CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail.com
> 250. mailto:will.kooiman at gmail.com
> 251. mailto:detomaso at server.detomasolist.com
> 252. mailto:DeTomaso at server.detomasolist.com
> 253. http://server.detomasolist.com/mailman/listinfo/detomaso
> 254. mailto:DeTomaso at server.detomasolist.com
> 255. http://server.detomasolist.com/mailman/listinfo/detomaso
> 256. mailto:[1]will.kooiman at gmail.com
> 257. mailto:[2]detomaso at server.detomasolist.com
> 258. mailto:3]DeTomaso at server.detomasolist.com
> 259. http://server.detomasolist.com/mailman/listinfo/detomaso
> 260. mailto:5]DeTomaso at server.detomasolist.com
> 261. http://server.detomasolist.com/mailman/listinfo/detomaso
> 262. mailto:will.kooiman at gmail.com
> 263. mailto:detomaso at server.detomasolist.com
> 264. mailto:DeTomaso at server.detomasolist.com
> 265. http://server.detomasolist.com/mailman/listinfo/detomaso
> 266. mailto:DeTomaso at server.detomasolist.com
> 267. http://server.detomasolist.com/mailman/listinfo/detomaso
> 268. mailto:larrys at panteraparts.com
> 269. mailto:will.kooiman at gmail.com
> 270. mailto:fresnofinches at aol.com
> 271. mailto:detomaso at server.detomasolist.com
> 272. mailto:D401A883.17A144%larrys at panteraparts.com
> 273. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
> 274. mailto:will.kooiman at gmail.com
> 275. mailto:detomaso at server.detomasolist.com
> 276. mailto:DeTomaso at server.detomasolist.com
> 277. http://server.detomasolist.com/mailman/listinfo/detomaso
> 278. mailto:DeTomaso at server.detomasolist.com
> 279. http://server.detomasolist.com/mailman/listinfo/detomaso
> 280. mailto:MikeLDrew at aol.com
> 281. mailto:dnunn at telus.net
> 282. mailto:detomaso at server.detomasolist.com
> 283. mailto:detomaso at server.detomasolist.com
> 284. mailto:C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com
> 285. http://server.detomasolist.com/pipermail/detomaso/attachments/2016
> 286. mailto:dnunn at telus.net
> 287. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 288. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 289. mailto:DeTomaso at server.detomasolist.com
> 290. http://server.detomasolist.com/mailman/listinfo/detomaso
> 291. mailto:julian_kift at hotmail.com
> 292. mailto:dnunn at telus.net
> 293. mailto:MikeLDrew at aol.com
> 294. mailto:detomaso at server.detomasolist.com
> 295. mailto:detomaso at server.detomasolist.com
> 296. mailto:CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.prod.outlook.com
> 297. mailto:detomaso-bounces at server.detomasolist.com
> 298. mailto:detomaso at server.detomasolist.com
> 299. mailto:detomaso at server.detomasolist.com
> 300. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 301. mailto:dnunn at telus.net
> 302. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 303. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 304. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
> 305. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 306. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 307. mailto:DeTomaso at server.detomasolist.com
> 308. http://server.detomasolist.com/mailman/listinfo/detomaso
> 309. mailto:DeTomaso at server.detomasolist.com
> 310. http://server.detomasolist.com/mailman/listinfo/detomaso
> 311. mailto:detomaso-bounces at server.detomasolist.com
> 312. mailto:detomaso at server.detomasolist.com
> 313. mailto:detomaso at server.detomasolist.com
> 314. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 315. mailto:dnunn at telus.net
> 316. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 317. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 318. mailto:DeTomaso at server.detomasolist.com
> 319. http://server.detomasolist.com/mailman/listinfo/detomaso
> 320. mailto:DeTomaso at server.detomasolist.com
> 321. http://server.detomasolist.com/mailman/listinfo/detomaso
> 322. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 323. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 324. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 325. http://server.detomasolist.com/mailman/listinfo/detomaso
> 326. http://server.detomasolist.com/mailman/listinfo/detomaso
> 327. http://server.detomasolist.com/pipermail/detomaso/attachments/201
> 328. mailto:MikeLDrew at aol.com
> 329. mailto:julian_kift at hotmail.com
> 330. mailto:dnunn at telus.net
> 331. mailto:detomaso at server.detomasolist.com
> 332. mailto:detomaso at server.detomasolist.com
> 333. mailto:7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com
> 334. mailto:julian_kift at hotmail.com
> 335. mailto:detomaso-bounces at server.detomasolist.com
> 336. mailto:detomaso at server.detomasolist.com
> 337. mailto:detomaso at server.detomasolist.com
> 338. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 339. mailto:dnunn at telus.net
> 340. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 341. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 342. mailto:DeTomaso at server.detomasolist.com
> 343. http://server.detomasolist.com/mailman/listinfo/detomaso
> 344. mailto:DeTomaso at server.detomasolist.com
> 345. http://server.detomasolist.com/mailman/listinfo/detomaso
> 346. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 347. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 348. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 349. http://server.detomasolist.com/mailman/listinfo/detomaso
> 350. http://server.detomasolist.com/mailman/listinfo/detomaso
> 351. mailto:DeTomaso at server.detomasolist.com
> 352. http://server.detomasolist.com/mailman/listinfo/detomaso
> 353. mailto:fresnofinches at aol.com
> 354. mailto:detomaso at server.detomasolist.com
> 355. mailto:78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com
> 356. mailto:larrys at panteraparts.com
> 357. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
> 358. mailto:will.kooiman at gmail.com
> 359. mailto:detomaso at server.detomasolist.com
> 360. mailto:DeTomaso at server.detomasolist.com
> 361. http://server.detomasolist.com/mailman/listinfo/detomaso
> 362. mailto:DeTomaso at server.detomasolist.com
> 363. http://server.detomasolist.com/mailman/listinfo/detomaso
> 364. mailto:cmccann1972 at gmail.com
> 365. mailto:larrys at panteraparts.com
> 366. mailto:detomaso at server.detomasolist.com
> 367. mailto:fresnofinches at aol.com
> 368. mailto:CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmail.com
> 369. mailto:larrys at panteraparts.com
> 370. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
> 371. mailto:will.kooiman at gmail.com
> 372. mailto:detomaso at server.detomasolist.com
> 373. mailto:DeTomaso at server.detomasolist.com
> 374. http://server.detomasolist.com/mailman/listinfo/detomaso
> 375. mailto:DeTomaso at server.detomasolist.com
> 376. http://server.detomasolist.com/mailman/listinfo/detomaso
> 377. mailto:DeTomaso at server.detomasolist.com
> 378. http://server.detomasolist.com/mailman/listinfo/detomaso
> 379. mailto:[1]larrys at panteraparts.com
> 380. mailto:[2]detomaso-bounces at server.detomasolist.comonbehalfof
> 381. mailto:3]will.kooiman at gmail.com
> 382. mailto:[4]detomaso at server.detomasolist.com
> 383. mailto:5]DeTomaso at server.detomasolist.com
> 384. http://server.detomasolist.com/mailman/listinfo/detomaso
> 385. mailto:7]DeTomaso at server.detomasolist.com
> 386. http://server.detomasolist.com/mailman/listinfo/detomaso
> 387. mailto:9]DeTomaso at server.detomasolist.com
> 388. http://server.detomasolist.com/mailman/listinfo/detomaso
> 389. mailto:larrys at panteraparts.com
> 390. mailto:detomaso-bounces at server.detomasolist.com
> 391. mailto:will.kooiman at gmail.com
> 392. mailto:detomaso at server.detomasolist.com
> 393. mailto:DeTomaso at server.detomasolist.com
> 394. http://server.detomasolist.com/mailman/listinfo/detomaso
> 395. mailto:DeTomaso at server.detomasolist.com
> 396. http://server.detomasolist.com/mailman/listinfo/detomaso
> 397. mailto:DeTomaso at server.detomasolist.com
> 398. http://server.detomasolist.com/mailman/listinfo/detomaso
> 399. mailto:red3644 at hotmail.com
> 400. mailto:detomaso at server.detomasolist.com
> 401. mailto:detomaso at server.detomasolist.com
> 402. mailto:SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07.prod.outlook.com
> 403. https://go.microsoft.com/fwlink/?LinkId=550986
> 404. https://go.microsoft.com/fwlink/?LinkId=550986
> 405. mailto:dnunn at telus.net
> 406. mailto:MikeLDrew at aol.com
> 407. mailto:julian_kift at hotmail.com
> 408. mailto:detomaso at server.detomasolist.com
> 409. mailto:003301d21066$5739cc80$05ad6580$@telus.net
> 410. mailto:MikeLDrew at aol.com
> 411. mailto:julian_kift at hotmail.com
> 412. mailto:dnunn at telus.net
> 413. mailto:detomaso at server.detomasolist.com
> 414. mailto:julian_kift at hotmail.com
> 415. mailto:detomaso-bounces at server.detomasolist.com
> 416. mailto:detomaso at server.detomasolist.com
> 417. mailto:detomaso at server.detomasolist.com
> 418. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 419. mailto:dnunn at telus.net
> 420. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 421. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 422. mailto:DeTomaso at server.detomasolist.com
> 423. http://server.detomasolist.com/mailman/listinfo/detomaso
> 424. mailto:DeTomaso at server.detomasolist.com
> 425. http://server.detomasolist.com/mailman/listinfo/detomaso
> 426. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 427. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 428. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 429. http://server.detomasolist.com/mailman/listinfo/detomaso
> 430. http://server.detomasolist.com/mailman/listinfo/detomaso
> 431. mailto:DeTomaso at server.detomasolist.com
> 432. http://server.detomasolist.com/mailman/listinfo/detomaso
> 433. http://server.detomasolist.com/pipermail/detomaso/attachments/201
> 434. mailto:bill at incendium.com
> 435. mailto:red3644 at hotmail.com
> 436. mailto:detomaso at server.detomasolist.com
> 437. mailto:detomaso at server.detomasolist.com
> 438. mailto:asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com
> 439. mailto:red3644 at hotmail.com
> 440. mailto:detomaso at server.detomasolist.com
> 441. https://go.microsoft.com/fwlink/?LinkId=550986
> 442. https://go.microsoft.com/fwlink/?LinkId=550986
> 443. mailto:DeTomaso at server.detomasolist.com
> 444. http://server.detomasolist.com/mailman/listinfo/detomaso
> 445. mailto:red3644 at hotmail.com
> 446. mailto:detomaso at server.detomasolist.com
> 447. https://go.microsoft.com/fwlink/?LinkId=550986
> 448. https://go.microsoft.com/fwlink/?LinkId=550986
> 449. mailto:DeTomaso at server.detomasolist.com
> 450. http://server.detomasolist.com/mailman/listinfo/detomaso
> 451. mailto:bill at incendium.com
> 452. mailto:dnunn at telus.net
> 453. mailto:MikeLDrew at aol.com
> 454. mailto:julian_kift at hotmail.com
> 455. mailto:detomaso at server.detomasolist.com
> 456. mailto:twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com
> 457. mailto:dnunn at telus.net
> 458. mailto:MikeLDrew at aol.com
> 459. mailto:julian_kift at hotmail.com
> 460. mailto:detomaso at server.detomasolist.com
> 461. mailto:MikeLDrew at aol.com
> 462. mailto:julian_kift at hotmail.com
> 463. mailto:dnunn at telus.net
> 464. mailto:detomaso at server.detomasolist.com
> 465. mailto:julian_kift at hotmail.com
> 466. mailto:detomaso-bounces at server.detomasolist.com
> 467. mailto:detomaso at server.detomasolist.com
> 468. mailto:detomaso at server.detomasolist.com
> 469. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 470. mailto:dnunn at telus.net
> 471. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 472. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 473. mailto:DeTomaso at server.detomasolist.com
> 474. http://server.detomasolist.com/mailman/listinfo/detomaso
> 475. mailto:DeTomaso at server.detomasolist.com
> 476. http://server.detomasolist.com/mailman/listinfo/detomaso
> 477. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 478. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 479. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 480. http://server.detomasolist.com/mailman/listinfo/detomaso
> 481. http://server.detomasolist.com/mailman/listinfo/detomaso
> 482. mailto:DeTomaso at server.detomasolist.com
> 483. http://server.detomasolist.com/mailman/listinfo/detomaso
> 484. mailto:DeTomaso at server.detomasolist.com
> 485. http://server.detomasolist.com/mailman/listinfo/detomaso
> 486. mailto:dnunn at telus.net
> 487. mailto:MikeLDrew at aol.com
> 488. mailto:julian_kift at hotmail.com
> 489. mailto:detomaso at server.detomasolist.com
> 490. mailto:MikeLDrew at aol.com
> 491. mailto:julian_kift at hotmail.com
> 492. mailto:dnunn at telus.net
> 493. mailto:detomaso at server.detomasolist.com
> 494. mailto:julian_kift at hotmail.com
> 495. mailto:detomaso-bounces at server.detomasolist.com
> 496. mailto:detomaso at server.detomasolist.com
> 497. mailto:detomaso at server.detomasolist.com
> 498. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
> 499. mailto:dnunn at telus.net
> 500. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 501. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 502. mailto:DeTomaso at server.detomasolist.com
> 503. http://server.detomasolist.com/mailman/listinfo/detomaso
> 504. mailto:DeTomaso at server.detomasolist.com
> 505. http://server.detomasolist.com/mailman/listinfo/detomaso
> 506. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 507. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 508. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 509. http://server.detomasolist.com/mailman/listinfo/detomaso
> 510. http://server.detomasolist.com/mailman/listinfo/detomaso
> 511. mailto:DeTomaso at server.detomasolist.com
> 512. http://server.detomasolist.com/mailman/listinfo/detomaso
> 513. mailto:DeTomaso at server.detomasolist.com
> 514. http://server.detomasolist.com/mailman/listinfo/detomaso
> 515. mailto:DeTomaso at server.detomasolist.com
> 516. http://server.detomasolist.com/mailman/listinfo/detomaso
> 517. mailto:DeTomaso at server.detomasolist.com
> 518. http://server.detomasolist.com/mailman/listinfo/detomaso
> 519. http://server.detomasolist.com/mailman/listinfo/detomaso
> 520. http://server.detomasolist.com/mailman/listinfo/detomaso
> 521. mailto:thimes at jpl.nasa.gov
> 522. http://server.detomasolist.com/mailman/listinfo/detomaso
> 523. mailto:thimes at jpl.nasa.gov
> 524. mailto:detomaso-bounces at server.detomasolist.com
> 525. mailto:demongusta at gmail.com
> 526. mailto:detomaso at server.detomasolist.com
> 527. mailto:detomaso at server.detomasolist.com
> 528. mailto:detomaso at server.detomasolist.com
> 529. mailto:detomaso at server.detomasolist.com
> 530. mailto:DeTomaso at server.detomasolist.com
> 531. http://server.detomasolist.com/mailman/listinfo/detomaso
> 532. http://server.detomasolist.com/mailman/listinfo/detomaso
> 533. http://centralwines.com/
> 534. http://facebook.com/CentralLiquors
> 535. mailto:DeTomaso at server.detomasolist.com
> 536. http://server.detomasolist.com/mailman/listinfo/detomaso
> 537. mailto:thimes at jpl.nasa.gov
> 538. mailto:detomaso-bounces at server.detomasolist.com
> 539. mailto:demongusta at gmail.com
> 540. mailto:detomaso at server.detomasolist.com
> 541. mailto:detomaso at server.detomasolist.com
> 542. mailto:detomaso at server.detomasolist.com
> 543. mailto:detomaso at server.detomasolist.com
> 544. mailto:DeTomaso at server.detomasolist.com
> 545. http://server.detomasolist.com/mailman/listinfo/detomaso
> 546. http://server.detomasolist.com/mailman/listinfo/detomaso
> 547. mailto:terry.himes at jpl.nasa.gov
> 548. mailto:thimes at jpl.nasa.gov
> 549. mailto:detomaso-bounces at server.detomasolist.com
> 550. mailto:demongusta at gmail.com
> 551. mailto:detomaso at server.detomasolist.com
> 552. mailto:detomaso at server.detomasolist.com
> 553. mailto:detomaso at server.detomasolist.com
> 554. mailto:detomaso at server.detomasolist.com
> 555. mailto:DeTomaso at server.detomasolist.com
> 556. http://server.detomasolist.com/mailman/listinfo/detomaso
> 557. http://server.detomasolist.com/mailman/listinfo/detomaso
> 558. http://www.PanteraParts.com/
> 559. http://server.detomasolist.com/mailman/listinfo/detomaso
> 560. https://www.summitracing.com/parts/mcl-1402-22
> 561. https://www.summitracing.com/parts/mcl-1402-22
> 562. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/universal/primary-fans.html
> 563. http://server.detomasolist.com/mailman/listinfo/detomaso
> 564. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/universal/primary-fans.html
> 565. mailto:DeTomaso at server.detomasolist.com
> 566. http://server.detomasolist.com/mailman/listinfo/detomaso
> 567. http://centralwines.com/
> 568. http://facebook.com/CentralLiquors
> 569. mailto:DeTomaso at server.detomasolist.com
> 570. http://server.detomasolist.com/mailman/listinfo/detomaso
> 571. http://centralwines.com/
> 572. http://facebook.com/CentralLiquors
> 573. mailto:mycars at comcast.net
> 574. mailto:detomaso at server.detomasolist.com
> 575. mailto:DeTomaso at server.detomasolist.com
> 576. http://server.detomasolist.com/mailman/listinfo/detomaso
> 577. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.html
> 578. http://centralwines.com/
> 579. http://facebook.com/CentralLiquors
> 580. mailto:mycars at comcast.net
> 581. mailto:detomaso at server.detomasolist.com
> 582. mailto:DeTomaso at server.detomasolist.com
> 583. http://server.detomasolist.com/mailman/listinfo/detomaso
> 584. http://server.detomasolist.com/mailman/listinfo/detomaso
> 585. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.html
> 586. mailto:mycars at comcast.net
> 587. mailto:4
> 588. mailto:mailto:4]detomaso at server.detomasolist.com
> 589. mailto:5
> 590. mailto:mailto:5]DeTomaso at server.detomasolist.com
> 591. http://server.detomasolist.com/mailman/listinfo/detomaso
> 592. http://centralwines.com/
> 593. http://facebook.com/CentralLiquors
> 594. mailto:mycars at comcast.net
> 595. mailto:detomaso at server.detomasolist.com
> 596. mailto:DeTomaso at server.detomasolist.com
> 597. http://server.detomasolist.com/mailman/listinfo/detomaso
> 598. mailto:DeTomaso at server.detomasolist.com
> 599. http://server.detomasolist.com/mailman/listinfo/detomaso
> 600. http://server.detomasolist.com/mailman/listinfo/detomaso
> 601. http://server.detomasolist.com/mailman/listinfo/detomaso
> 602. http://server.detomasolist.com/mailman/listinfo/detomaso
> 603. mailto:will.kooiman at gmail.com
> 604. mailto:detomaso at server.detomasolist.com
> 605. mailto:DeTomaso at server.detomasolist.com
> 606. http://server.detomasolist.com/mailman/listinfo/detomaso
> 607. mailto:DeTomaso at server.detomasolist.com
> 608. http://server.detomasolist.com/mailman/listinfo/detomaso
> 609. http://server.detomasolist.com/mailman/listinfo/detomaso
> 610. http://server.detomasolist.com/mailman/listinfo/detomaso
> 611. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/33a69e52/attachment-0001.jpeg
> 612. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 613. http://server.detomasolist.com/mailman/listinfo/detomaso
> 614. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 615. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
> 616. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 617. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 618. http://www.ipsco.org/
> 619. http://server.detomasolist.com/mailman/listinfo/detomaso
> 620. http://server.detomasolist.com/mailman/listinfo/detomaso
> 621. http://www.ipsco.org/
> 622. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 623. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 624. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 625. http://server.detomasolist.com/mailman/listinfo/detomaso
> 626. http://server.detomasolist.com/mailman/listinfo/detomaso
> 627. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/ed6ee2dd/attachment-0001.jpeg
> 628. http://www.ipsco.org/
> 629. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 630. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 631. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 632. http://server.detomasolist.com/mailman/listinfo/detomaso
> 633. http://server.detomasolist.com/mailman/listinfo/detomaso
> 634. http://server.detomasolist.com/mailman/listinfo/detomaso
> 635. http://server.detomasolist.com/mailman/listinfo/detomaso
> 636. http://server.detomasolist.com/mailman/listinfo/detomaso
> 637. http://server.detomasolist.com/mailman/listinfo/detomaso
> 638. http://server.detomasolist.com/mailman/listinfo/detomaso
> 639. http://server.detomasolist.com/mailman/listinfo/detomaso
> 640. mailto:larrys at panteraparts.com
> 641. mailto:detomaso-bounces at server.detomasolist.com
> 642. mailto:will.kooiman at gmail.com
> 643. mailto:detomaso at server.detomasolist.com
> 644. mailto:DeTomaso at server.detomasolist.com
> 645. http://server.detomasolist.com/mailman/listinfo/detomaso
> 646. mailto:DeTomaso at server.detomasolist.com
> 647. http://server.detomasolist.com/mailman/listinfo/detomaso
> 648. mailto:DeTomaso at server.detomasolist.com
> 649. http://server.detomasolist.com/mailman/listinfo/detomaso
> 650. https://go.microsoft.com/fwlink/?LinkId=550986
> 651. https://go.microsoft.com/fwlink/?LinkId=550986
> 652. mailto:MikeLDrew at aol.com
> 653. http://www.ipsco.org/
> 654. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 655. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 656. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 657. http://server.detomasolist.com/mailman/listinfo/detomaso
> 658. http://server.detomasolist.com/mailman/listinfo/detomaso
> 659. http://server.detomasolist.com/mailman/listinfo/detomaso
> 660. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/e7e2256b/attachment-0001.jpg
> 661. https://go.microsoft.com/fwlink/?LinkId=550986
> 662. https://go.microsoft.com/fwlink/?LinkId=550986
> 663. http://server.detomasolist.com/mailman/listinfo/detomaso
> 664. https://go.microsoft.com/fwlink/?LinkId=550986
> 665. https://go.microsoft.com/fwlink/?LinkId=550986
> 666. http://server.detomasolist.com/mailman/listinfo/detomaso
> 667. mailto:MikeLDrew at aol.com
> 668. http://www.ipsco.org/
> 669. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 670. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 671. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 672. http://server.detomasolist.com/mailman/listinfo/detomaso
> 673. http://server.detomasolist.com/mailman/listinfo/detomaso
> 674. http://server.detomasolist.com/mailman/listinfo/detomaso
> 675. http://server.detomasolist.com/mailman/listinfo/detomaso
> 676. mailto:MikeLDrew at aol.com
> 677. http://www.ipsco.org/
> 678. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 679. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 680. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> 681. http://server.detomasolist.com/mailman/listinfo/detomaso
> 682. http://server.detomasolist.com/mailman/listinfo/detomaso
> 683. http://server.detomasolist.com/mailman/listinfo/detomaso
> 684. http://server.detomasolist.com/mailman/listinfo/detomaso
> 685. http://server.detomasolist.com/mailman/listinfo/detomaso
> 686. http://server.detomasolist.com/mailman/listinfo/detomaso
> 687. mailto:DeTomaso at server.detomasolist.com
> 688. http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Checking the service manual I see that the return line to the water
pump is connected to the top, and this is how it has always been
connected on my car.
Personally I think it makes sense to have it connected to the bottom
for at least two reasons:
1) The coolant is at least in theory cooler at the bottom
2) It will supply coolant longer if there is a leak.
Not sure how easy it would be to reverse the lines on my car. The lines
would have to cross each other.
Thomas
Den 2016-09-19 kl. 15:46, skrev Jerry Knotts:
When I bought my first Pantera in 2000 I had a heating problem at the
track. When It would puke about 1/2 gal of coolant it would overheat
and was hell to try and keep cool. It would sometimes suck the full
puke tank back in as it cooled and work for a few laps then overheat
again. I would refill the unit belch it at the radiator and it would
work again for a while.
After a couple of disappointing track days, I was under the car and
followed the radiator lines forward. The engine return was routed from
the top of the radiator. I found that when the car was rebuilt some
years before they had replaced the radiator with a "Chevy" style
radiator which had the lines reversed. My engine return was from the
top of the radiator and the engine hot was going to the bottom of the
radiator. Rearranged different radiator hook up hoses and it has been
fine since.
Sometimes the obvious isn't
jerry knotts
On 9/17/2016 9:56 AM, Julian Kift wrote:
It's great to hear that you now have a functioning cooling system,
although I have to wonder which of the particular changes contributed
most, I suspect the thermostat housing being blocked off was a bulk of
the problem.
I had a similar experience when I got my first Pantera, it overheated
in traffic, so I jumped on the web found all these articles about
swapping radiators and fans etc. and duly went and purchased a setup.
When I got to going through the car checking the thermostat I found it
was a Windsor style, I swapped it for the correct Cleveland t-stat and
voila heating issues resolved.
It's just a reminder to check the simple stuff prior to laying out big
$$$, even now I think there are still a lot of myths' perpetuated about
these cars... like someone once said "why let the truth get in the way
of a good story"
Julian
__________________________________________________________________
From: DeTomaso [1][1]<detomaso-bounces at server.detomasolist.com> on behalf of
Owen Cooke [2][2]<owen at tadhgcooke.com>
Sent: Saturday, September 17, 2016 2:19 AM
To: [[3]3]detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 19
guys
i had overheating problems
i put in a new hall brass rad but my car had bleed pipe from the rad
back to the swirl tank and no fitting in halls rad for it apart from a
top bleed screw
so i made a junction to fit the original bleed screw and the bleed pipe
to it
then new mariah (is that the right name) that fir on the stock
brackets
and wired them directly from the battery to the relays
i found the hole under the thermostat was blocked with solder
i removed that and fitted a new stat
now all is perfect temp wise - warms up steady and holds the 90c or
195f in all conditions
my gauge with sender in block beside the pump/stat ready 150f but its
steady and i know what to expect
very happy with result
owen cooke
On 16/09/2016 23:31, [[4]4]detomaso-request at server.detomasolist.com wrote:
> Send DeTomaso mailing list submissions to
> [[5]5]detomaso at server.detomasolist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> [1][6][6]http://server.detomasolist.com/mailman/listinfo/detomaso
[2]DeTomaso Info Page
server.detomasolist.com
This is the DeTomaso mailing list, a free and open forum for the
discussion of issues surrounding all DeTomaso automobiles. This is an
unmoderated mailing list ...
> or, via email, send a message with subject or body 'help' to
> [[7]7]detomaso-request at server.detomasolist.com
>
> You can reach the person managing the list at
> [[8]8]detomaso-owner at server.detomasolist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of DeTomaso digest..."
>
>
> Daily Detomaso List Digest
>
> Today's Topics:
>
> 1. Fans and shroud (Jack Donahue)
> 2. Re: Fans and shroud (Himes, Terry (397C))
> 3. Tires for Grp IV Flared Car (MyCars)
> 4. Re: Tires for Grp IV Flared Car (LSJ)
> 5. Re: Fans and shroud (Jack Donahue)
> 6. Re: Fans and shroud (Jack Donahue)
> 7. Re: Fans and shroud (Larry Stock)
> 8. McLeod hydraulic throw out (Cullen McCann)
> 9. Re: Fans and shroud (Ken Green)
> 10. McLeod hydraulic throw out (Larry Finch)
> 11. Re: Tires for Grp IV Flared Car (MyCars)
> 12. Re: Tires for Grp IV Flared Car (MyCars)
> 13. Re: McLeod hydraulic throw out (Will Kooiman)
> 14. Re: McLeod hydraulic throw out (Cullen McCann)
> 15. Re: McLeod hydraulic throw out (Larry Stock)
> 16. Re: Sanden Compressors noises (Mike Drew)
> 17. Re: Sanden Compressors noises (Julian Kift)
> 18. Re: Sanden Compressors noises (Mike Drew)
> 19. Re: McLeod hydraulic throw out (Larry Finch)
> 20. Re: McLeod hydraulic throw out (Cullen McCann)
> 21. NPC, Need transmission suggestions (michael frazier)
> 22. Re: Sanden Compressors noises (David Nunn)
> 23. Re: NPC, Need transmission suggestions (bill)
> 24. Re: Sanden Compressors noises (bill)
>
>
>
----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 16 Sep 2016 09:29:46 -0700
> From: Jack Donahue [9][9]<demongusta at gmail.com>
> To: [10][10]"detomaso at server.detomasolist.com"
> [11][11]<detomaso at server.detomasolist.com>
> Cc: [12][12]"detomaso at server.detomasolist.com"
> [13][13]<detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Fans and shroud
> Message-ID: [14][14]<CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Hey all - A few weeks ago I was talking asking The List about
radiators - all said-and-done, I decided on the Hall radiator, since I
wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
admit it?s because I want to, not necessarily NEED to. It ain?t broke,
but I am fixing it(?). Didn?t want to admit that, but...Lol. There
really is an ulterior motive, but I just don?t want to mention it right
now; but I ran my idea past Brassworks - who says they will
?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> Now - fans. I really don?t know the brand name of my fans, but they
are suckers - about 12? diameter - and the blades are ?curved? -
sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
since they said they can be - or are - mounted in a shroud that is a
perfect match for the Pantera radiator size. I think. And someone
offered-up a part number, but I deleted (or lost) it. All normal for
me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
>
> ------------------------------
>
> Message: 2
> Date: Fri, 16 Sep 2016 16:54:05 +0000
> From: "Himes, Terry (397C)" [15][15]<terry.himes at jpl.nasa.gov>
> To: Jack Donahue [16][16]<demongusta at gmail.com>,
> [17][17]"detomaso at server.detomasolist.com"
[18][18]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Fans and shroud
> Message-ID: [19][19]<D4016E9F.92F3B%thimes at jpl.nasa.gov>
> Content-Type: text/plain; charset="utf-8"
>
> Jack,
>
> Good stuff. I too am running the original radiator with new fans.
I'm not going to change it
> now but I will follow your progress. Someday I will have to deal
with it. So keep posting and
> I will keep saving the responses. ;-)
>
> Terry
>
>
>
> "A Purple Heart proves you were smart enough to hatch a plan,
> stupid enough to try it and lucky enough to survive!"
>
> Terry W. Himes
> JPL Jet Propulsion Laboratory
> Dawn Spacecraft Team
> Rosetta Sequence Team Lead
> Phone: (818) 393-6261
> Cell: (818) 653-8213
> Fax: (818) 393-3147
> [[20]20]thimes at jpl.nasa.gov<[3][21][21]mailto:thimes at jpl.nasa.gov>
> ??
>
> From: DeTomaso
<[[22]22]detomaso-bounces at server.detomasolist.com[23][23]<mailto:detomaso-bou
nces at ser
ve
r.detomasolist.com>> on behalf of Jack Donahue
<[[24]24]demongusta at gmail.com[25][25]<mailto:demongusta at gmail.com>>
> Date: Friday, September 16, 2016 9:29 AM
> To:
"[[26]26]detomaso at server.detomasolist.com[27][27]<mailto:detomaso at server.deto
masolist
.c
om>"
<[[28]28]detomaso at server.detomasolist.com[29][29]<mailto:detomaso at server.deto
masolist
.c
om>>
> Cc:
"[[30]30]detomaso at server.detomasolist.com[31][31]<mailto:detomaso at server.deto
masolist
.c
om>"
<[[32]32]detomaso at server.detomasolist.com[33][33]<mailto:detomaso at server.deto
masolist
.c
om>>
> Subject: [DeTomaso] Fans and shroud
>
> Hey all - A few weeks ago I was talking asking The List about
radiators - all said-and-done, I decided on the Hall radiator, since I
wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
admit it?s because I want to, not necessarily NEED to. It ain?t broke,
but I am fixing it(?). Didn?t want to admit that, but...Lol. There
really is an ulterior motive, but I just don?t want to mention it right
now; but I ran my idea past Brassworks - who says they will
?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> Now - fans. I really don?t know the brand name of my fans, but they
are suckers - about 12? diameter - and the blades are ?curved? -
sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
since they said they can be - or are - mounted in a shroud that is a
perfect match for the Pantera radiator size. I think. And someone
offered-up a part number, but I deleted (or lost) it. All normal for
me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
>
[[34]34]DeTomaso at server.detomasolist.com[35][35]<mailto:DeTomaso at server.detom
asolist.
co
m>
> [4][36][36]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> Jack,
> Good stuff. I too am running the original radiator with new
fans. I'm
> not going to change it
> now but I will follow your progress. Someday I will have to deal
with
> it. So keep posting and
> I will keep saving the responses. ;-)
> Terry
>
> "A Purple Heart proves you were smart enough to hatch a plan,
>
> stupid enough to try it and lucky enough to survive!"
>
> Terry W. Himes
>
> JPL Jet Propulsion Laboratory
>
> Dawn Spacecraft Team
>
> Rosetta Sequence Team Lead
>
> Phone: (818) 393-6261
>
> Cell: (818) 653-8213
>
> Fax: (818) 393-3147
>
> [[[37]37]1]thimes at jpl.nasa.gov
>
> From: DeTomaso [38][38]<[2]detomaso-bounces at server.detomasolist.com> on
behalf
> of Jack Donahue [39][39]<[3]demongusta at gmail.com>
> Date: Friday, September 16, 2016 9:29 AM
> To: [40][40]"[4]detomaso at server.detomasolist.com"
> [41][41]<[5]detomaso at server.detomasolist.com>
> Cc: [42][42]"[6]detomaso at server.detomasolist.com"
> [43][43]<[7]detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Fans and shroud
>
> Hey all - A few weeks ago I was talking asking The List
> about radiators - all said-and-done, I decided on the Hall
radiator,
> since I wanted brass/copper instead of aluminum. And, yes Mike
Drew, I
> have to admit it's because I want to, not necessarily NEED to. It
ain't
> broke, but I am fixing it(?). Didn't want to admit that,
but...Lol.
> There really is an ulterior motive, but I just don't want to
mention it
> right now; but I ran my idea past Brassworks - who says they
will
> "build-to-suit" - but the Hall unit looks to be
"tried-and-proven".
> Now - fans. I really don't know the brand name of my fans, but
they are
> suckers - about 12" diameter - and the blades are "curved" -
> sickle-shaped. The names that been bouncing around are Mariah,
SPAL,
> and Flex-a-lite. I had read someone's post about the
Flex-a-lite's
> since they said they can be - or are - mounted in a shroud that
is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal
for
> me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[44]44]8]DeTomaso at server.detomasolist.com
> [9][45][45]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [5][46][46]mailto:thimes at jpl.nasa.gov
> 2. [6][47][47]mailto:detomaso-bounces at server.detomasolist.com
> 3. [7][48][48]mailto:demongusta at gmail.com
> 4. [8][49][49]mailto:detomaso at server.detomasolist.com
> 5. [9][50][50]mailto:detomaso at server.detomasolist.com
> 6. [10][51][51]mailto:detomaso at server.detomasolist.com
> 7. [11][52][52]mailto:detomaso at server.detomasolist.com
> 8. [12][53][53]mailto:DeTomaso at server.detomasolist.com
> 9. [13][54][54]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> ------------------------------
>
> Message: 3
> Date: Fri, 16 Sep 2016 10:03:20 -0700
> From: MyCars [55][55]<mycars at comcast.net>
> To: [[56]56]detomaso at server.detomasolist.com
> Subject: [DeTomaso] Tires for Grp IV Flared Car
> Message-ID: [57][57]<6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
the
> rear and wondering what would be a good match for the front.
>
> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
give
> the car a bit of rake, but what would the handling be like?
>
> Thanks in advance for your thoughts
>
> Roy
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 16 Sep 2016 17:08:50 +0000 (UTC)
> From: LSJ [58][58]<lashdeep at yahoo.com>
> To: MyCars [59][59]<mycars at comcast.net>, [60][60]"detomaso at server.detomaso
list.com
"
> [61][61]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> Message-ID: [62][62]<1287234121.1004140.1474045730621 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> What size wheel up front?
> ?LSJ
>
> central wines-spirits?? est 1934
>
> 625 e street nw
> washington, dc 20004
> centralwines.com
>
> facebook.com/CentralLiquors
>
> 202-737-2800
>
>
>
> From: MyCars [63][63]<mycars at comcast.net>
> To: [[64]64]detomaso at server.detomasolist.com
> Sent: Friday, September 16, 2016 1:03 PM
> Subject: [DeTomaso] Tires for Grp IV Flared Car
>
> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
the
> rear and wondering what would be a good match for the front.
>
> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
give
> the car a bit of rake, but what would the handling be like?
>
> Thanks in advance for your thoughts
>
> Roy
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[65]65]DeTomaso at server.detomasolist.com
> [14][66][66]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
>
>
> -------------- next part --------------
> What size wheel up front?
>
> LSJ
> central
> wines-spirits est 1934
> 625 e street nw
> washington, dc 20004
> [1]centralwines.com
> [2]facebook.com/CentralLiquors
> 202-737-2800
>
__________________________________________________________________
>
> From: MyCars [67][67]<mycars at comcast.net>
> To: [[68]68]detomaso at server.detomasolist.com
> Sent: Friday, September 16, 2016 1:03 PM
> Subject: [DeTomaso] Tires for Grp IV Flared Car
> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
for the
> rear and wondering what would be a good match for the front.
> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
would
> give
> the car a bit of rake, but what would the handling be like?
> Thanks in advance for your thoughts
> Roy
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[69]69]3]DeTomaso at server.detomasolist.com
> [4][70][70]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [15][71][71]http://centralwines.com/
> 2. [16][72][72]http://facebook.com/CentralLiquors
> 3. [17][73][73]mailto:DeTomaso at server.detomasolist.com
> 4. [18][74][74]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> ------------------------------
>
> Message: 5
> Date: Fri, 16 Sep 2016 10:13:05 -0700
> From: Jack Donahue [75][75]<demongusta at gmail.com>
> To: "Himes, Terry (397C)" [76][76]<terry.himes at jpl.nasa.gov>
> Cc: [77][77]"detomaso at server.detomasolist.com"
> [78][78]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Fans and shroud
> Message-ID: [79][79]<09791B61-DE0D-40CC-859D-437A8528952A at gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Terry - I don?t have the original radiator - I currently have a
Fluidyne with twin suckers, tilted forward, and A/C condenser in front.
Originally, I wanted to just add a shroud, based on a friend of mine
who does some serious off-road driving - he swears by a shroud - says
it really made a difference for him and that I should AT LEAST get one
for the whole ?Pantera-Heat-Prevention Program. That sounds good -
(PHPP). Anyway, the more I looked into things, the more I was
?converted" to brass/copper as it seems to be more reliable - and more
repairable (which I like).
> jack
>
>> On Sep 16, 2016, at 9:54 AM, Himes, Terry (397C)
[80][80]<terry.himes at jpl.nasa.gov> wrote:
>>
>> Jack,
>>
>> Good stuff. I too am running the original radiator with new fans.
I'm not going to change it
>> now but I will follow your progress. Someday I will have to deal
with it. So keep posting and
>> I will keep saving the responses. ;-)
>>
>> Terry
>>
>>
>>
>> "A Purple Heart proves you were smart enough to hatch a plan,
>> stupid enough to try it and lucky enough to survive!"
>>
>> Terry W. Himes
>> JPL Jet Propulsion Laboratory
>> Dawn Spacecraft Team
>> Rosetta Sequence Team Lead
>> Phone: (818) 393-6261
>> Cell: (818) 653-8213
>> Fax: (818) 393-3147
>> [[81]81]thimes at jpl.nasa.gov <[19][82][82]mailto:thimes at jpl.nasa.gov>
>> ??
>>
>> From: DeTomaso <[[83]83]detomaso-bounces at server.detomasolist.com
<[20][84][84]mailto:detomaso-bounces at server.detomasolist.com>> on behalf of
Jack Donahue <[[85]85]demongusta at gmail.com <[21][86][86]mailto:demongusta at gma
il.com>>
>> Date: Friday, September 16, 2016 9:29 AM
>> To: "[[87]87]detomaso at server.detomasolist.com
<[22][88][88]mailto:detomaso at server.detomasolist.com>"
<[[89]89]detomaso at server.detomasolist.com
<[23][90][90]mailto:detomaso at server.detomasolist.com>>
>> Cc: "[[91]91]detomaso at server.detomasolist.com
<[24][92][92]mailto:detomaso at server.detomasolist.com>"
<[[93]93]detomaso at server.detomasolist.com
<[25][94][94]mailto:detomaso at server.detomasolist.com>>
>> Subject: [DeTomaso] Fans and shroud
>>
>> Hey all - A few weeks ago I was talking asking The List about
radiators - all said-and-done, I decided on the Hall radiator, since I
wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
admit it?s because I want to, not necessarily NEED to. It ain?t broke,
but I am fixing it(?). Didn?t want to admit that, but...Lol. There
really is an ulterior motive, but I just don?t want to mention it right
now; but I ran my idea past Brassworks - who says they will
?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
>> Now - fans. I really don?t know the brand name of my fans, but they
are suckers - about 12? diameter - and the blades are ?curved? -
sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
since they said they can be - or are - mounted in a shroud that is a
perfect match for the Pantera radiator size. I think. And someone
offered-up a part number, but I deleted (or lost) it. All normal for
me.
>> So - I am ready for opinions/suggestions:
>> jack
>> #4348
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[95]95]DeTomaso at server.detomasolist.com
<[26][96][96]mailto:DeTomaso at server.detomasolist.com>
>> [27][97][97]http://server.detomasolist.com/mailman/listinfo/detomaso
<[28][98][98]http://server.detomasolist.com/mailman/listinfo/detomaso>
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> Terry - I don't have the original radiator - I currently have a
> Fluidyne with twin suckers, tilted forward, and A/C condenser in
front.
> Originally, I wanted to just add a shroud, based on a friend of
mine
> who does some serious off-road driving - he swears by a shroud -
says
> it really made a difference for him and that I should AT LEAST
get one
> for the whole "Pantera-Heat-Prevention Program. That sounds good
-
> (PHPP). Anyway, the more I looked into things, the more I was
> "converted" to brass/copper as it seems to be more reliable -
and more
> repairable (which I like).
>
> jack
>
> On Sep 16, 2016, at 9:54 AM, Himes, Terry (397C)
> [99][99]<[1]terry.himes at jpl.nasa.gov> wrote:
>
> Jack,
> Good stuff. I too am running the original radiator with new
fans. I'm
> not going to change it
> now but I will follow your progress. Someday I will have to deal
with
> it. So keep posting and
> I will keep saving the responses. ;-)
> Terry
> "A Purple Heart proves you were smart enough to hatch a plan,
> stupid enough to try it and lucky enough to survive!"
> Terry W. Himes
> JPL Jet Propulsion Laboratory
> Dawn Spacecraft Team
> Rosetta Sequence Team Lead
> Phone: (818) 393-6261
> Cell: (818) 653-8213
> Fax: (818) 393-3147
> [[[100]100]2]thimes at jpl.nasa.gov
> From: DeTomaso [101][101]<[3]detomaso-bounces at server.detomasolist.com>
on
behalf
> of Jack Donahue [102][102]<[4]demongusta at gmail.com>
> Date: Friday, September 16, 2016 9:29 AM
> To: [103][103]"[5]detomaso at server.detomasolist.com"
> [104][104]<[6]detomaso at server.detomasolist.com>
> Cc: [105][105]"[7]detomaso at server.detomasolist.com"
> [106][106]<[8]detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Fans and shroud
> Hey all - A few weeks ago I was talking asking The List
> about radiators - all said-and-done, I decided on the Hall
radiator,
> since I wanted brass/copper instead of aluminum. And, yes Mike
Drew, I
> have to admit it's because I want to, not necessarily NEED to. It
ain't
> broke, but I am fixing it(?). Didn't want to admit that,
but...Lol.
> There really is an ulterior motive, but I just don't want to
mention it
> right now; but I ran my idea past Brassworks - who says they
will
> "build-to-suit" - but the Hall unit looks to be
"tried-and-proven".
> Now - fans. I really don't know the brand name of my fans, but
they are
> suckers - about 12" diameter - and the blades are "curved" -
> sickle-shaped. The names that been bouncing around are Mariah,
SPAL,
> and Flex-a-lite. I had read someone's post about the
Flex-a-lite's
> since they said they can be - or are - mounted in a shroud that
is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal
for
> me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[107]107]9]DeTomaso at server.detomasolist.com
> [10][108][108]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [29][109][109]mailto:terry.himes at jpl.nasa.gov
> 2. [30][110][110]mailto:thimes at jpl.nasa.gov
> 3. [31][111][111]mailto:detomaso-bounces at server.detomasolist.com
> 4. [32][112][112]mailto:demongusta at gmail.com
> 5. [33][113][113]mailto:detomaso at server.detomasolist.com
> 6. [34][114][114]mailto:detomaso at server.detomasolist.com
> 7. [35][115][115]mailto:detomaso at server.detomasolist.com
> 8. [36][116][116]mailto:detomaso at server.detomasolist.com
> 9. [37][117][117]mailto:DeTomaso at server.detomasolist.com
> 10. [38][118][118]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
> ------------------------------
>
> Message: 6
> Date: Fri, 16 Sep 2016 10:17:31 -0700
> From: Jack Donahue [119][119]<demongusta at gmail.com>
> To: [[120]120]GR2835 at comcast.net
> Cc: [121][121]"detomaso at server.detomasolist.com"
> [122][122]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Fans and shroud
> Message-ID: [123][123]<2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> There-in lies one of my problems - I could never MAKE a shroud. I
wish I could - maybe out of foil-wrap. I will check out that website,
thanks.
>
>> On Sep 16, 2016, at 10:07 AM, [[124]124]GR2835 at comcast.net wrote:
>>
>> Pantera Electronics has recommended fans with part numbers under the
fan controller button on their website.
>> I have a stock radiator that was modified for lay down and air
conditioning condenser up front........I have a fan shroud that I made
and mounted the 2 sucker fans. 192 thermostat ran 192 in a 14 mile
traffic jam last year that.took me 90 minutes to get
through.......temperature was 98 degrees leaving the 2015 Woodward
Cruise...........my wife complained that she was too cold with the air
set on the warmest setting.
>> Good luck
>> Gerry in Illinois
>> ----- Original Message -----
>> From: Jack Donahue [125][125]<demongusta at gmail.com>
>> To: [[126]126]detomaso at server.detomasolist.com
>> Cc: [[127]127]detomaso at server.detomasolist.com
>> Sent: Fri, 16 Sep 2016 16:29:46 -0000 (UTC)
>> Subject: [DeTomaso] Fans and shroud
>>
>> Hey all - A few weeks ago I was talking asking The List about
radiators - all said-and-done, I decided on the Hall radiator, since I
wanted brass/copper instead of aluminum. And, yes Mike Drew, I have to
admit it?s because I want to, not necessarily NEED to. It ain?t broke,
but I am fixing it(?). Didn?t want to admit that, but...Lol. There
really is an ulterior motive, but I just don?t want to mention it right
now; but I ran my idea past Brassworks - who says they will
?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
>> Now - fans. I really don?t know the brand name of my fans, but they
are suckers - about 12? diameter - and the blades are ?curved? -
sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
since they said they can be - or are - mounted in a shroud that is a
perfect match for the Pantera radiator size. I think. And someone
offered-up a part number, but I deleted (or lost) it. All normal for
me.
>> So - I am ready for opinions/suggestions:
>> jack
>> #4348
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[128]128]DeTomaso at server.detomasolist.com
>> [39][129][129]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 16 Sep 2016 11:24:26 -0700
> From: Larry Stock [130][130]<larrys at panteraparts.com>
> To: Jack Donahue [131][131]<demongusta at gmail.com>
> Cc: [132][132]"detomaso at server.detomasolist.com"
> [133][133]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Fans and shroud
> Message-ID: [134][134]<D4018324.17A0EF%larrys at panteraparts.com>
> Content-Type: text/plain; charset="ISO-8859-1"
>
> Hi Jack,
>
> You should be able to use the fans off the Fluidyne, if not we have
our
> Maridyne system fans and our own bracket kit and if you need shrouds
for a
> full lie-down system, we have those too. Typically we recommend our
half
> Lay forward system which minimizes the thru air turbulence.
>
>
>
>
>
>
> 11041B Defl. Rad. S.S. Lay down for kit $95.00
> 11042B Stainless deflector right $65.00
> 11043B Stainless deflector left $65.00
>
>
>
>
>
>
>
> 11055B Radiator Puller Fan Shroud SS Mounting brackets set of 3
$125.00
> 11055P PPC Puller Fans & Shroud Assy $325.00
>
>
>
> If the Hall Brass radiator has the stock quick 90 degree hard
radiator
> tubes installed, you will not be able to mount a puller fan shroud
under
> those tubes, if it has the straight out tubes then you can use 90
degree
> molded rubber hoses to clear the Puller shroud like your Fluidyne.
>
> Larry Stock
>
> Pantera Parts Connection LC
> 550 Mallory Way
> Carson City NV 89701
> [40]www.PanteraParts.com
> PH 775-283-4411
> Fax 775-283-4410
> Cell 1-800-DeTomaso 800-338-6627
>
>
>
>
>
> On 9/16/16, 9:29 AM, "DeTomaso on behalf of Jack Donahue"
> [135][135]<detomaso-bounces at server.detomasolist.com on behalf of
> [[136]136]demongusta at gmail.com> wrote:
>
>> Hey all - A few weeks ago I was talking asking The List about
radiators
>> - all said-and-done, I decided on the Hall radiator, since I wanted
>> brass/copper instead of aluminum. And, yes Mike Drew, I have to
admit
>> it?s because I want to, not necessarily NEED to. It ain?t broke, but
I am
>> fixing it(?). Didn?t want to admit that, but...Lol. There really is
an
>> ulterior motive, but I just don?t want to mention it right now; but
I ran
>> my idea past Brassworks - who says they will ?build-to-suit? - but
the
>> Hall unit looks to be ?tried-and-proven?.
>> Now - fans. I really don?t know the brand name of my fans, but they
are
>> suckers - about 12? diameter - and the blades are ?curved? -
>> sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and
>> Flex-a-lite. I had read someone?s post about the Flex-a-lite?s since
they
>> said they can be - or are - mounted in a shroud that is a perfect
match
>> for the Pantera radiator size. I think. And someone offered-up a
part
>> number, but I deleted (or lost) it. All normal for me.
>> So - I am ready for opinions/suggestions:
>> jack
>> #4348
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[137]137]DeTomaso at server.detomasolist.com
>> [41][138][138]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
>> the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or
>> approve the archiving of list messages.
>
>
>
> ------------------------------
>
> Message: 8
> Date: Fri, 16 Sep 2016 14:09:55 -0500
> From: Cullen McCann [139][139]<cmccann1972 at gmail.com>
> To: [[140]140]detomaso at server.detomasolist.com
> Subject: [DeTomaso] McLeod hydraulic throw out
> Message-ID:
>
[141][141]<CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail.com
>
> Content-Type: text/plain; charset="utf-8"
>
> Good afternoon!
>
> Has anyone installed the McLeod hydraulic throwout bearing that they
say is
> Pantera specific for the ZF, and what was your experience? I've had a
> fantastic experience with them on another performance car
application.
>
> [42][142][142]https://www.summitracing.com/parts/mcl-1402-22
>
> Thank you!!
> -------------- next part --------------
> Good afternoon!
> Has anyone installed the McLeod hydraulic throwout bearing that
they
> say is Pantera specific for the ZF, and what was your experience?
I've
> had a fantastic experience with them on another performance car
> application.
> [1][143][143]https://www.summitracing.com/parts/mcl-1402-22
> Thank you!!
>
> References
>
> 1. [43][144][144]https://www.summitracing.com/parts/mcl-1402-22
>
> ------------------------------
>
> Message: 9
> Date: Fri, 16 Sep 2016 19:27:46 +0000 (UTC)
> From: Ken Green [145][145]<kenn_green at yahoo.com>
> To: Jack Donahue [146][146]<demongusta at gmail.com>,
> [147][147]"detomaso at server.detomasolist.com"
[148][148]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Fans and shroud
> Message-ID: [149][149]<1796334072.2409059.1474054066544 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Jack,
> ??? You should be able to find the fan and shroud here:
>
[44][150][150]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans
/uni
versal/primary-fans.html
>
> From: Jack Donahue [151][151]<demongusta at gmail.com>
> To: [152][152]"detomaso at server.detomasolist.com"
[153][153]<detomaso at server.detomasolist.com>
> Cc: [154][154]"detomaso at server.detomasolist.com"
[155][155]<detomaso at server.detomasolist.com>
> Sent: Friday, September 16, 2016 9:29 AM
> Subject: [DeTomaso] Fans and shroud
>
> Hey all - A few weeks ago I was talking asking The List about?
radiators - all said-and-done, I decided on the Hall radiator, since I
wanted brass/copper instead of aluminum.? And, yes Mike Drew, I have to
admit it?s because I want to, not necessarily NEED to. It ain?t broke,
but I am fixing it(?). Didn?t want to admit that, but...Lol. There
really is an ulterior motive, but I just don?t want to mention it right
now; but I ran my idea past? Brassworks? - who says they will
?build-to-suit? - but the Hall unit looks to be ?tried-and-proven?.
> Now - fans. I really don?t know the brand name of my fans, but they
are suckers - about 12? diameter - and the blades are ?curved?? -
sickle-shaped. The names that been bouncing around are Mariah, SPAL,
and Flex-a-lite. I had read someone?s post about the Flex-a-lite?s
since they said they can be - or are - mounted in a shroud that is a
perfect match for the Pantera radiator size. I think. And someone
offered-up? a part number, but I deleted (or lost) it. All normal for
me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[156]156]DeTomaso at server.detomasolist.com
> [45][157][157]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
>
> -------------- next part --------------
> Jack,
> You should be able to find the fan and shroud here:
>
[1][158][158]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/
univ
> ersal/primary-fans.html
>
__________________________________________________________________
>
> From: Jack Donahue [159][159]<demongusta at gmail.com>
> To: [160][160]"detomaso at server.detomasolist.com"
> [161][161]<detomaso at server.detomasolist.com>
> Cc: [162][162]"detomaso at server.detomasolist.com"
> [163][163]<detomaso at server.detomasolist.com>
> Sent: Friday, September 16, 2016 9:29 AM
> Subject: [DeTomaso] Fans and shroud
> Hey all - A few weeks ago I was talking asking The List about
> radiators - all said-and-done, I decided on the Hall radiator,
since I
> wanted brass/copper instead of aluminum. And, yes Mike Drew, I
have to
> admit itas because I want to, not necessarily NEED to. It ainat
broke,
> but I am fixing it(?). Didnat want to admit that, but...Lol.
There
> really is an ulterior motive, but I just donat want to mention it
right
> now; but I ran my idea past Brassworks - who says they will
> abuild-to-suita - but the Hall unit looks to be
atried-and-provena.
> Now - fans. I really donat know the brand name of my fans, but
they are
> suckers - about 12a diameter - and the blades are acurveda -
> sickle-shaped. The names that been bouncing around are Mariah,
SPAL,
> and Flex-a-lite. I had read someoneas post about the
Flex-a-liteas
> since they said they can be - or are - mounted in a shroud that
is a
> perfect match for the Pantera radiator size. I think. And someone
> offered-up a part number, but I deleted (or lost) it. All normal
for
> me.
> So - I am ready for opinions/suggestions:
> jack
> #4348
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[164]164]2]DeTomaso at server.detomasolist.com
> [3][165][165]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1.
[46][166][166]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans
/uni
versal/primary-fans.html
> 2. [47][167][167]mailto:DeTomaso at server.detomasolist.com
> 3. [48][168][168]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
> ------------------------------
>
> Message: 10
> Date: Fri, 16 Sep 2016 12:35:17 -0700
> From: Larry Finch [169][169]<fresnofinches at aol.com>
> To: Email List Address For Posting [170][170]<detomaso at server.detomasolist.
com>
> Subject: [DeTomaso] McLeod hydraulic throw out
> Message-ID: [171][171]<6C366701-6502-47C0-A0DC-59494515D156 at aol.com>
> Content-Type: text/plain; charset=utf-8
>
> Cullen,
>
> 2511 came equipped with one of those from Dennis when I purchased it
in 2002. Since then I have rebuilt the unit twice (three?) and most
recently did so using what I believe to be their current offering. I
spoke with and ordered directly from McLeod.
>
> My opinion, in brief, is a very simple "NO!!"
>
> The current offering was shipped to me with an incorrect input snout
spacer (I solved that by using the old spacer which luckily I still had
on hand), and the stainless steel input line, due to its 90? fitting
where one should have used a 45? fitting, twisted itself, unseen of
course, within the bell housing when it was connected to the hard line
attached to the chassis rails. Even stainless steel lines don't hold up
very long against grinding by a pressure plate.
>
> The stainless steel bleed line is about 4 inches too long, sticking
outside the bell housing in a terrible display of ugly.
>
> Finally, my last experience started with me ordering the same rebuild
kit I had previously used, using the same number off of the previous
invoice. What I received from them was the rebuild kit for the current
unit which uses an entirely different set of all rings. I ultimately
determined that for all three generations of their hydraulic bearing
McLeod has used exactly the same rebuild kit part number. They added no
suffix such as a ? A or a ?B which to me seems indicative of a problem
within the company. No, they no longer support a rebuild kit for the
first two generations.
>
> While you have some experience in using one of these previously, the
task of establishing proper free play and clearances is quite exacting
and unforgiving. If you get it wrong there is nothing left to do but
pull the transaxle and start all over again.
>
> The unit I have is now adjusted for the factory shortcomings and as
has been my experience for over 50,000 miles, the system works just
fine. Dennis however no longer recommends their installation and based
on my experience I would not encourage any other owners to venture down
that road for themselves.
>
> Feel free to reach out to me off-line or by phone for more of the
gory details.
>
> Larry
>
> Sent from me using a magic, handheld electronic gizmo.
>
>
> ------------------------------
>
> Message: 11
> Date: Fri, 16 Sep 2016 12:50:41 -0700
> From: MyCars [172][172]<mycars at comcast.net>
> To: LSJ [173][173]<lashdeep at yahoo.com>, [174][174]"detomaso at server.detomaso
list.com"
> [175][175]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> Message-ID: [176][176]<37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Going off memory (my car is still in Seattle) I am in San Diego area.
> They are 15" Aluminum Weld 5-spoke rims, that I believe are about
9.5"
> wide.
>
> On 9/16/2016 10:08 AM, LSJ wrote:
>> What size wheel up front?
>> LSJ
>>
>> /*central */
>> /*wines-spirits est 1934
>> */
>> /*
>> */
>> /*625 e street nw
>> */
>> /*washington, dc 20004*/
>> /*
>> */
>> /*centralwines.com <[49][177][177]http://centralwines.com/>
>> */
>> /*
>> */
>> /*facebook.com/CentralLiquors
<[50][178][178]http://facebook.com/CentralLiquors>
>> */
>> /*
>> */
>> /*202-737-2800*/
>>
>>
>>
>>
>>
-----------------------------------------------------------------------
-
>> *From:* MyCars [179][179]<mycars at comcast.net>
>> *To:* [[180]180]detomaso at server.detomasolist.com
>> *Sent:* Friday, September 16, 2016 1:03 PM
>> *Subject:* [DeTomaso] Tires for Grp IV Flared Car
>>
>> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires for
the
>> rear and wondering what would be a good match for the front.
>>
>> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This would
give
>> the car a bit of rake, but what would the handling be like?
>>
>> Thanks in advance for your thoughts
>>
>> Roy
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[181]181]DeTomaso at server.detomasolist.com
<[51][182][182]mailto:DeTomaso at server.detomasolist.com>
>> [52][183][183]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>>
>>
> -------------- next part --------------
> Going off memory (my car is still in Seattle) I am in San Diego
area.
> They are 15" Aluminum Weld 5-spoke rims, that I believe are about
9.5"
> wide.
>
> On 9/16/2016 10:08 AM, LSJ wrote:
>
> What size wheel up front?
>
> LSJ
> central
> wines-spirits est 1934
> 625 e street nw
> washington, dc 20004
> [1]centralwines.com
> [2]facebook.com/CentralLiquors
> 202-737-2800
>
__________________________________________________________________
>
> From: MyCars [3][184][184]<mycars at comcast.net>
> To: [[[185]185]4]detomaso at server.detomasolist.com
> Sent: Friday, September 16, 2016 1:03 PM
> Subject: [DeTomaso] Tires for Grp IV Flared Car
> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
for the
> rear and wondering what would be a good match for the front.
> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
would
> give
> the car a bit of rake, but what would the handling be like?
> Thanks in advance for your thoughts
> Roy
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[186]186]5]DeTomaso at server.detomasolist.com
> [6][187][187]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [53][188][188]http://centralwines.com/
> 2. [54][189][189]http://facebook.com/CentralLiquors
> 3. [55][190][190]mailto:mycars at comcast.net
> 4. [56][191][191]mailto:detomaso at server.detomasolist.com
> 5. [57][192][192]mailto:DeTomaso at server.detomasolist.com
> 6. [58][193][193]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
> ------------------------------
>
> Message: 12
> Date: Fri, 16 Sep 2016 13:00:36 -0700
> From: MyCars [194][194]<mycars at comcast.net>
> To: [[195]195]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Tires for Grp IV Flared Car
> Message-ID: [196][196]<013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> I just checked Weld's website
>
[59][197][197]http://weldwheels.com/shop/street-strip/sport-forged-wheels/pro
star
.html
>
> They do not offer a 15" rim 9.5" wide, so I would guess they are 9"
wide
>
>
> On 9/16/2016 12:50 PM, MyCars wrote:
>> Going off memory (my car is still in Seattle) I am in San Diego
area.
>> They are 15" Aluminum Weld 5-spoke rims, that I believe are
about 9.5"
>> wide.
>>
>> On 9/16/2016 10:08 AM, LSJ wrote:
>>
>> What size wheel up front?
>>
>> LSJ
>> central
>> wines-spirits est 1934
>> 625 e street nw
>> washington, dc 20004
>> [1]centralwines.com
>> [2]facebook.com/CentralLiquors
>> 202-737-2800
>>
__________________________________________________________________
>>
>> From: MyCars [3][198][198]<mycars at comcast.net>
>> To: [[[199]199]4]detomaso at server.detomasolist.com
>> Sent: Friday, September 16, 2016 1:03 PM
>> Subject: [DeTomaso] Tires for Grp IV Flared Car
>> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
for the
>> rear and wondering what would be a good match for the front.
>> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
would
>> give
>> the car a bit of rake, but what would the handling be like?
>> Thanks in advance for your thoughts
>> Roy
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[[200]200]5]DeTomaso at server.detomasolist.com
>> [6][201][201]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>> Members who post to this list grant license to the list to
forward any
>> message posted here to all past, current, or future members of
the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>>
>> References
>>
>> 1. [60][202][202]http://centralwines.com/
>> 2. [61][203][203]http://facebook.com/CentralLiquors
>> 3. [62][204][204]mailto:mycars at comcast.net
>> 4. [63][205][205]mailto:detomaso at server.detomasolist.com
>> 5. [64][206][206]mailto:DeTomaso at server.detomasolist.com
>> 6. [65][207][207]http://server.detomasolist.com/mailman/listinfo/deto
maso
>>
>>
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[208]208]DeTomaso at server.detomasolist.com
>> [66][209][209]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> I just checked Weld's website
>
[1][210][210]http://weldwheels.com/shop/street-strip/sport-forged-wheels/pros
tar.
> html
> They do not offer a 15" rim 9.5" wide, so I would guess they are
9"
> wide
>
> On 9/16/2016 12:50 PM, MyCars wrote:
>
> Going off memory (my car is still in Seattle) I am in San Diego
area.
> They are 15" Aluminum Weld 5-spoke rims, that I believe are about
9.5"
> wide.
>
> On 9/16/2016 10:08 AM, LSJ wrote:
>
> What size wheel up front?
>
> LSJ
> central
> wines-spirits est 1934
> 625 e street nw
> washington, dc 20004
> [1]centralwines.com
> [2]facebook.com/CentralLiquors
> 202-737-2800
>
__________________________________________________________________
>
> From: MyCars [3][2][211][211]<mycars at comcast.net>
> To: [[[[212]212]3]4]detomaso at server.detomasolist.com
> Sent: Friday, September 16, 2016 1:03 PM
> Subject: [DeTomaso] Tires for Grp IV Flared Car
> I just bought 345-35 R15 Pirelli Asimmetrico (24.8" tall) tires
for the
> rear and wondering what would be a good match for the front.
> I found 225-50 R15 Pirelli P Zero Trofeo R (23.9" tall). This
would
> give
> the car a bit of rake, but what would the handling be like?
> Thanks in advance for your thoughts
> Roy
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[[213]213]4]5]DeTomaso at server.detomasolist.com
> [6][5][214][214]http://server.detomasolist.com/mailman/listinfo/detomas
o
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [6][215][215]http://centralwines.com/
> 2. [7][216][216]http://facebook.com/CentralLiquors
> 3. [8][217][217]mailto:mycars at comcast.net
> 4. [9][218][218]mailto:detomaso at server.detomasolist.com
> 5. [10][219][219]mailto:DeTomaso at server.detomasolist.com
> 6. [11][220][220]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[221]221]12]DeTomaso at server.detomasolist.com
> [13][222][222]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the li
> nks above.
>
> Members who post to this list grant license to the list to forward
any message p
> osted here to all past, current, or future members of the list. They
also grant
> the list owner permission to maintain an archive or approve the
archiving of lis
> t messages.
>
> References
>
> 1.
[67][223][223]http://weldwheels.com/shop/street-strip/sport-forged-wheels/pro
star
.html
> 2. [68][224][224]mailto:mycars at comcast.net
> 3. [69][225]m[226]69][225]226]69]mailto:4]detomaso at server.detomasolist.
com
> 4. [70][227]m[228]70][226]228]70]mailto:5]DeTomaso at server.detomasolist.
com
> 5. [71][229][227]http://server.detomasolist.com/mailman/listinfo/detoma
so
> 6. [72][230][228]http://centralwines.com/
> 7. [73][231][229]http://facebook.com/CentralLiquors
> 8. [74][232][230]mailto:mycars at comcast.net
> 9. [75][233][231]mailto:detomaso at server.detomasolist.com
> 10. [76][234][232]mailto:DeTomaso at server.detomasolist.com
> 11. [77][235][233]http://server.detomasolist.com/mailman/listinfo/detoma
so
> 12. [78][236][234]mailto:DeTomaso at server.detomasolist.com
> 13. [79][237][235]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
> ------------------------------
>
> Message: 13
> Date: Fri, 16 Sep 2016 16:26:27 -0400
> From: Will Kooiman [238][236]<will.kooiman at gmail.com>
> To: Larry Finch [239][237]<fresnofinches at aol.com>, Email List Address For
> Posting [240][238]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] McLeod hydraulic throw out
> Message-ID: [241][239]<D401CD29.16A666%will.kooiman at gmail.com>
> Content-Type: text/plain; charset="ISO-8859-1"
>
> Wow.
>
> I have one in my Cobra, and so far it has worked perfectly.
>
> My Cobra came with an external slave from a Volvo that was readily
> available 20 years ago, but is now unobtanium. Rather than building
a new
> bracket for a different slave, I switched to a McLeod slave.
>
> At any rate, as I said, it has worked perfectly - so far.
>
> --
> Will
>
>
>
>
>
> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> [242][240]<detomaso at server.detomasolist.com> wrote:
>
>> Cullen,
>>
>> 2511 came equipped with one of those from Dennis when I purchased it
in
>> 2002. Since then I have rebuilt the unit twice (three?) and most
recently
>> did so using what I believe to be their current offering. I spoke
with
>> and ordered directly from McLeod.
>>
>> My opinion, in brief, is a very simple "NO!!"
>>
>> The current offering was shipped to me with an incorrect input snout
>> spacer (I solved that by using the old spacer which luckily I still
had
>> on hand), and the stainless steel input line, due to its 90? fitting
>> where one should have used a 45? fitting, twisted itself, unseen of
>> course, within the bell housing when it was connected to the hard
line
>> attached to the chassis rails. Even stainless steel lines don't hold
up
>> very long against grinding by a pressure plate.
>>
>> The stainless steel bleed line is about 4 inches too long, sticking
>> outside the bell housing in a terrible display of ugly.
>>
>> Finally, my last experience started with me ordering the same
rebuild kit
>> I had previously used, using the same number off of the previous
invoice.
>> What I received from them was the rebuild kit for the current unit
which
>> uses an entirely different set of all rings. I ultimately determined
that
>> for all three generations of their hydraulic bearing McLeod has used
>> exactly the same rebuild kit part number. They added no suffix such
as a
>> ? A or a ?B which to me seems indicative of a problem within the
company.
>> No, they no longer support a rebuild kit for the first two
generations.
>>
>> While you have some experience in using one of these previously, the
task
>> of establishing proper free play and clearances is quite exacting
and
>> unforgiving. If you get it wrong there is nothing left to do but
pull the
>> transaxle and start all over again.
>>
>> The unit I have is now adjusted for the factory shortcomings and as
has
>> been my experience for over 50,000 miles, the system works just
fine.
>> Dennis however no longer recommends their installation and based on
my
>> experience I would not encourage any other owners to venture down
that
>> road for themselves.
>>
>> Feel free to reach out to me off-line or by phone for more of the
gory
>> details.
>>
>> Larry
>>
>> Sent from me using a magic, handheld electronic gizmo.
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[241]243]DeTomaso at server.detomasolist.com
>> [80][244][242]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
>> the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or
>> approve the archiving of list messages.
>
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 16 Sep 2016 15:50:41 -0500
> From: Cullen McCann [245][243]<cmccann1972 at gmail.com>
> To: Will Kooiman [246][244]<will.kooiman at gmail.com>
> Cc: Email List Address For Posting
[247][245]<detomaso at server.detomasolist.com>,
> Larry Finch [248][246]<fresnofinches at aol.com>
> Subject: Re: [DeTomaso] McLeod hydraulic throw out
> Message-ID:
>
[249][247]<CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail.com
>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you Larry. You answered my question perfectly. I am like Will,
I have
> one on my Cobra as well, with a ford Top Loader and its been there
for
> several years and Ive always loved it. I actually bought one that was
"new"
> but several generations old, and when I called McLeod to inquire
about
> fresh O-rings, they sent me a brand new unit just to "ensure a
positive
> experience". I installed it with a performance clutch and a
scattershield,
> bled it according to the instructions and that was about 4 years ago.
> Havent had a lick of trouble. (knocking on wood now).
>
> the frame rails on my cobra are 24" apart and I couldn't fit the
clutch
> fork between the side of the bellhousing and the frame rail, and ive
had a
> bad experience with performance clutches and cables breaking in the
> past...so I went the hydraulic route and have loved it.
>
> however... I will certainly consider carefully this drama as I set up
my P
> car. I have a plan B with an external slave also, if I choose not to
use
> the factory unit. Thank you sir.
>
> Cullen
>
> On Fri, Sep 16, 2016 at 3:26 PM, Will Kooiman
[250][248]<will.kooiman at gmail.com>
> wrote:
>
>> Wow.
>>
>> I have one in my Cobra, and so far it has worked perfectly.
>>
>> My Cobra came with an external slave from a Volvo that was readily
>> available 20 years ago, but is now unobtanium. Rather than building
a new
>> bracket for a different slave, I switched to a McLeod slave.
>>
>> At any rate, as I said, it has worked perfectly - so far.
>>
>> --
>> Will
>>
>>
>>
>>
>>
>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
>> [251][249]<detomaso at server.detomasolist.com> wrote:
>>
>>> Cullen,
>>>
>>> 2511 came equipped with one of those from Dennis when I purchased
it in
>>> 2002. Since then I have rebuilt the unit twice (three?) and most
recently
>>> did so using what I believe to be their current offering. I spoke
with
>>> and ordered directly from McLeod.
>>>
>>> My opinion, in brief, is a very simple "NO!!"
>>>
>>> The current offering was shipped to me with an incorrect input
snout
>>> spacer (I solved that by using the old spacer which luckily I still
had
>>> on hand), and the stainless steel input line, due to its 90?
fitting
>>> where one should have used a 45? fitting, twisted itself, unseen of
>>> course, within the bell housing when it was connected to the hard
line
>>> attached to the chassis rails. Even stainless steel lines don't
hold up
>>> very long against grinding by a pressure plate.
>>>
>>> The stainless steel bleed line is about 4 inches too long, sticking
>>> outside the bell housing in a terrible display of ugly.
>>>
>>> Finally, my last experience started with me ordering the same
rebuild kit
>>> I had previously used, using the same number off of the previous
invoice.
>>> What I received from them was the rebuild kit for the current unit
which
>>> uses an entirely different set of all rings. I ultimately
determined that
>>> for all three generations of their hydraulic bearing McLeod has
used
>>> exactly the same rebuild kit part number. They added no suffix such
as a
>>> ? A or a ?B which to me seems indicative of a problem within the
company.
>>> No, they no longer support a rebuild kit for the first two
generations.
>>>
>>> While you have some experience in using one of these previously,
the task
>>> of establishing proper free play and clearances is quite exacting
and
>>> unforgiving. If you get it wrong there is nothing left to do but
pull the
>>> transaxle and start all over again.
>>>
>>> The unit I have is now adjusted for the factory shortcomings and as
has
>>> been my experience for over 50,000 miles, the system works just
fine.
>>> Dennis however no longer recommends their installation and based on
my
>>> experience I would not encourage any other owners to venture down
that
>>> road for themselves.
>>>
>>> Feel free to reach out to me off-line or by phone for more of the
gory
>>> details.
>>>
>>> Larry
>>>
>>> Sent from me using a magic, handheld electronic gizmo.
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [[250]252]DeTomaso at server.detomasolist.com
>>> [81][253][251]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>> the links above.
>>>
>>> Members who post to this list grant license to the list to forward
any
>>> message posted here to all past, current, or future members of the
list.
>>> They also grant the list owner permission to maintain an archive or
>>> approve the archiving of list messages.
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[252]254]DeTomaso at server.detomasolist.com
>> [82][255][253]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
>> the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or
approve
>> the archiving of list messages.
>>
> -------------- next part --------------
> Thank you Larry. You answered my question perfectly. I am like
Will, I
> have one on my Cobra as well, with a ford Top Loader and its been
there
> for several years and Ive always loved it. I actually bought one
that
> was "new" but several generations old, and when I called McLeod
to
> inquire about fresh O-rings, they sent me a brand new unit just
to
> "ensure a positive experience". I installed it with a performance
> clutch and a scattershield, bled it according to the instructions
and
> that was about 4 years ago. Havent had a lick of trouble.A
(knocking
> on wood now).
> the frame rails on my cobra are 24" apart and I couldn't fit the
clutch
> fork between the side of the bellhousing and the frame rail, and
ive
> had a bad experience with performance clutches and cables
breaking in
> the past...so I went the hydraulic route and have loved it.
> however... I will certainly consider carefully this drama as I
set up
> my P car. I have a plan B with an external slave also, if I
choose not
> to use the factory unit.A Thank you sir.
> Cullen
>
> On Fri, Sep 16, 2016 at 3:26 PM, Will Kooiman
> [256][254]<[1]will.kooiman at gmail.com> wrote:
>
> Wow.
> I have one in my Cobra, and so far it has worked perfectly.
> My Cobra came with an external slave from a Volvo that was
readily
> available 20 years ago, but is now unobtanium.A Rather than
> building a new
> bracket for a different slave, I switched to a McLeod slave.
> At any rate, as I said, it has worked perfectly - so far.
> --
> Will
> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
>
> [257][255]<[2]detomaso at server.detomasolist.com> wrote:
> >Cullen,
> >
> >2511 came equipped with one of those from Dennis when I
purchased it
> in
> >2002. Since then I have rebuilt the unit twice (three?) and most
> recently
> >did so using what I believe to be their current offering. I
spoke with
> >and ordered directly from McLeod.
> >
> >My opinion, in brief, is a very simple "NO!!"
> >
> >The current offering was shipped to me with an incorrect input
snout
> >spacer (I solved that by using the old spacer which luckily I
still
> had
> >on hand), and the stainless steel input line, due to its 90ADEG
> fitting
> >where one should have used a 45ADEG fitting, twisted itself,
unseen of
> >course, within the bell housing when it was connected to the
hard line
> >attached to the chassis rails. Even stainless steel lines don't
hold
> up
> >very long against grinding by a pressure plate.
> >
> >The stainless steel bleed line is about 4 inches too long,
sticking
> >outside the bell housing in a terrible display of ugly.
> >
> >Finally, my last experience started with me ordering the same
rebuild
> kit
> >I had previously used, using the same number off of the previous
> invoice.
> >What I received from them was the rebuild kit for the current
unit
> which
> >uses an entirely different set of all rings. I ultimately
determined
> that
> >for all three generations of their hydraulic bearing McLeod has
used
> >exactly the same rebuild kit part number. They added no suffix
such as
> a
> >A A or a AB which to me seems indicative of a problem within the
> company.
> >No, they no longer support a rebuild kit for the first two
> generations.
> >
> >While you have some experience in using one of these previously,
the
> task
> >of establishing proper free play and clearances is quite
exacting and
> >unforgiving. If you get it wrong there is nothing left to do but
pull
> the
> >transaxle and start all over again.
> >
> >The unit I have is now adjusted for the factory shortcomings and
as
> has
> >been my experience for over 50,000 miles, the system works just
fine.
> >Dennis however no longer recommends their installation and based
on my
> >experience I would not encourage any other owners to venture
down that
> >road for themselves.
> >
> >Feel free to reach out to me off-line or by phone for more of
the gory
> >details.
> >
> >Larry
> >
> >Sent from me using a magic, handheld electronic gizmo.
> >_______________________________________________
> >
> >
> >Detomaso Email List is not managed by POCA
> >Posted emails must not exceed 1.5 Megabytes
> >DeTomaso mailing list
> >[[[256]258]3]DeTomaso at server.detomasolist.com
> >[4][259][257]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> >To manage your subscription (change email address, unsubscribe,
etc.)
> use
> >the links above.
> >
> >Members who post to this list grant license to the list to
forward any
> >message posted here to all past, current, or future members of
the
> list.
> >They also grant the list owner permission to maintain an archive
or
> >approve the archiving of list messages.
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[258]260]5]DeTomaso at server.detomasolist.com
> [6][261][259]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [83][262][260]mailto:will.kooiman at gmail.com
> 2. [84][263][261]mailto:detomaso at server.detomasolist.com
> 3. [85][264][262]mailto:DeTomaso at server.detomasolist.com
> 4. [86][265][263]http://server.detomasolist.com/mailman/listinfo/detoma
so
> 5. [87][266][264]mailto:DeTomaso at server.detomasolist.com
> 6. [88][267][265]http://server.detomasolist.com/mailman/listinfo/detoma
so
>
> ------------------------------
>
> Message: 15
> Date: Fri, 16 Sep 2016 13:53:15 -0700
> From: Larry Stock [268][266]<larrys at panteraparts.com>
> To: Will Kooiman [269][267]<will.kooiman at gmail.com>, Larry Finch
> [270][268]<fresnofinches at aol.com>, Email List Address For Posting
> [271][269]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] McLeod hydraulic throw out
> Message-ID: [272][270]<D401A883.17A144%larrys at panteraparts.com>
> Content-Type: text/plain; charset="EUC-KR"
>
> The basic problem is that the bell housing is too confined and not
> ventilated well enough to dissipate the heat. The Superformance is
using a
> Quick Time bell housing that has much more ventilation than the
DeTomaso
> Bell housing. Just another reason not to run those Plugs that some
vendors
> offer, that close off the inspection hole at the left hand top of the
bell
> housing. That is the only heat dissipation vent there is.
> Larry
>
> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> [273][271]<detomaso-bounces at server.detomasolist.com on behalf of
> [[272]274]will.kooiman at gmail.com> wrote:
>
>> Wow.
>>
>> I have one in my Cobra, and so far it has worked perfectly.
>>
>> My Cobra came with an external slave from a Volvo that was readily
>> available 20 years ago, but is now unobtanium. Rather than building
a new
>> bracket for a different slave, I switched to a McLeod slave.
>>
>> At any rate, as I said, it has worked perfectly - so far.
>>
>> --
>> Will
>>
>>
>>
>>
>>
>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
>> [275][273]<detomaso at server.detomasolist.com> wrote:
>>
>>> Cullen,
>>>
>>> 2511 came equipped with one of those from Dennis when I purchased
it in
>>> 2002. Since then I have rebuilt the unit twice (three?) and most
recently
>>> did so using what I believe to be their current offering. I spoke
with
>>> and ordered directly from McLeod.
>>>
>>> My opinion, in brief, is a very simple "NO!!"
>>>
>>> The current offering was shipped to me with an incorrect input
snout
>>> spacer (I solved that by using the old spacer which luckily I still
had
>>> on hand), and the stainless steel input line, due to its 90?
fitting
>>> where one should have used a 45? fitting, twisted itself, unseen of
>>> course, within the bell housing when it was connected to the hard
line
>>> attached to the chassis rails. Even stainless steel lines don't
hold up
>>> very long against grinding by a pressure plate.
>>>
>>> The stainless steel bleed line is about 4 inches too long, sticking
>>> outside the bell housing in a terrible display of ugly.
>>>
>>> Finally, my last experience started with me ordering the same
rebuild kit
>>> I had previously used, using the same number off of the previous
invoice.
>>> What I received from them was the rebuild kit for the current unit
which
>>> uses an entirely different set of all rings. I ultimately
determined that
>>> for all three generations of their hydraulic bearing McLeod has
used
>>> exactly the same rebuild kit part number. They added no suffix such
as a
>>> ? A or a ?B which to me seems indicative of a problem within the
company.
>>> No, they no longer support a rebuild kit for the first two
generations.
>>>
>>> While you have some experience in using one of these previously,
the task
>>> of establishing proper free play and clearances is quite exacting
and
>>> unforgiving. If you get it wrong there is nothing left to do but
pull the
>>> transaxle and start all over again.
>>>
>>> The unit I have is now adjusted for the factory shortcomings and as
has
>>> been my experience for over 50,000 miles, the system works just
fine.
>>> Dennis however no longer recommends their installation and based on
my
>>> experience I would not encourage any other owners to venture down
that
>>> road for themselves.
>>>
>>> Feel free to reach out to me off-line or by phone for more of the
gory
>>> details.
>>>
>>> Larry
>>>
>>> Sent from me using a magic, handheld electronic gizmo.
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [[274]276]DeTomaso at server.detomasolist.com
>>> [89][277][275]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>> the links above.
>>>
>>> Members who post to this list grant license to the list to forward
any
>>> message posted here to all past, current, or future members of the
list.
>>> They also grant the list owner permission to maintain an archive or
>>> approve the archiving of list messages.
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[276]278]DeTomaso at server.detomasolist.com
>> [90][279][277]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
>> the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or
>> approve the archiving of list messages.
>>
>
>
>
> ------------------------------
>
> Message: 16
> Date: Fri, 16 Sep 2016 14:11:22 -0700
> From: Mike Drew [280][278]<MikeLDrew at aol.com>
> To: David Nunn [281][279]<dnunn at telus.net>
> Cc: "[282][280]<detomaso at server.detomasolist.com>"
> [283][281]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Message-ID: [284][282]<C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com>
> Content-Type: text/plain; charset="us-ascii"
>
> All,
>
> Here is a photo of the IPSCO water pump idler pulley setup. Note
there is no alternator in view, as this car is fitted with a flat
firewall kit that moves the alternator outboard of the A/C system.
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image.jpeg
> Type: image/jpeg
> Size: 594482 bytes
> Desc: not available
> URL:
<[91][285][283]http://server.detomasolist.com/pipermail/detomaso/attachments/
2016
0916/33a69e52/attachment-0001.jpeg>
> -------------- next part --------------
>
>
> Mike
>
> Sent from my iPhone
>
> On Sep 15, 2016, at 15:41, "David Nunn" [286][284]<dnunn at telus.net> wrote:
>
>> Rob,
>>
>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
It
>> eliminates the "fitted", non-adjustable belt and makes it
adjustable.
>> It sure makes installation a lot easier. It's not listed on
IPSCO's web
>> site so you have to call or e-mail to get details.
>>
>> Also, IPSCO has an idler pulley kit that makes installation and
belt
>> tensioning a breeze.
>>
>> [1][287][285]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>>
>> References
>>
>> 1. [92][288][286]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.ht
m
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[287]289]DeTomaso at server.detomasolist.com
>> [93][290][288]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> ------------------------------
>
> Message: 17
> Date: Fri, 16 Sep 2016 21:16:34 +0000
> From: Julian Kift [291][289]<julian_kift at hotmail.com>
> To: David Nunn [292][290]<dnunn at telus.net>, Mike Drew [293][291]<MikeLDrew@
aol.com>,
> [294][292]"detomaso at server.detomasolist.com"
[295][293]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Message-ID:
>
[296][294]<CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.prod
.out
look.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Mike,
>
>
> It gets even better, that looks to be a different idler again, the
one that was previously linked appears to go in the stock location, but
was adjustable from the front negating the usual need to get a wrench
on the rear.
>
> Julian
> ________________________________
> From: DeTomaso [297][295]<detomaso-bounces at server.detomasolist.com> on beha
lf
of Mike Drew via DeTomaso [298][296]<detomaso at server.detomasolist.com>
> Sent: Friday, September 16, 2016 2:11 PM
> To: David Nunn
> Cc: [299][297]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Sanden Compressors noises
>
> All,
>
> Here is a photo of the IPSCO water pump idler pulley setup. Note
there is no alternator in view, as this car is fitted with a flat
firewall kit that moves the alternator outboard of the A/C system.
>
> [[300][298]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.c
om]
>
>
> Mike
>
> Sent from my iPhone
>
> On Sep 15, 2016, at 15:41, "David Nunn" [301][299]<dnunn at telus.net> wrote:
>
>> Rob,
>>
>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
It
>> eliminates the "fitted", non-adjustable belt and makes it
adjustable.
>> It sure makes installation a lot easier. It's not listed on
IPSCO's web
>> site so you have to call or e-mail to get details.
>>
>> Also, IPSCO has an idler pulley kit that makes installation and
belt
>> tensioning a breeze.
>>
>> [1][302][300]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>>
>> References
>>
>> 1. [94][303][301]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.ht
m
>
[[95][304][302]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg][305][
303]<http:
//ww
w.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm>
>
> Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking
...<[96][306][304]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm>
> [97]www.ipsco.org
> Pantera Idler Pulley Assembly . Replacement for factory Idler Pulley,
this assembly allow adjustment without trying to hold a wrench behind
the bracket to tighten in ...
>
>
>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[305]307]DeTomaso at server.detomasolist.com
>> [98][308][306]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[307]309]DeTomaso at server.detomasolist.com
> [99][310][308]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> Mike,
>
> It gets even better, that looks to be a different idler again,
the one
> that was previously linked appears to go in the stock location,
but was
> adjustable from the front negating the usual need to get a wrench
on
> the rear.
> Julian
>
__________________________________________________________________
>
> From: DeTomaso [311][309]<detomaso-bounces at server.detomasolist.com> on
behalf of
> Mike Drew via DeTomaso [312][310]<detomaso at server.detomasolist.com>
> Sent: Friday, September 16, 2016 2:11 PM
> To: David Nunn
> Cc: [313][311]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Sanden Compressors noises
>
> All,
> Here is a photo of the IPSCO water pump idler pulley setup. Note
there
> is no alternator in view, as this car is fitted with a flat
firewall
> kit that moves the alternator outboard of the A/C system.
>
[[314][312]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
]
> Mike
> Sent from my iPhone
> On Sep 15, 2016, at 15:41, "David Nunn" [315][313]<dnunn at telus.net> wro
te:
> > Rob,
> >
> > If I'm not mistaken, IPSCO sells a kit that modifies Kirk's
kit. It
> > eliminates the "fitted", non-adjustable belt and makes it
> adjustable.
> > It sure makes installation a lot easier. It's not listed on
IPSCO's
> web
> > site so you have to call or e-mail to get details.
> >
> > Also, IPSCO has an idler pulley kit that makes installation
and
> belt
> > tensioning a breeze.
> >
> > [1][316][314]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.ht
m
> >
> > References
> >
> > 1. [1][317][315]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley
.htm
> [2][Idler%20Pulley.jpg]
> [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
> [100]www.ipsco.org
> Pantera Idler Pulley Assembly . Replacement for factory Idler
Pulley,
> this assembly allow adjustment without trying to hold a wrench
behind
> the bracket to tighten in ...
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[316]318]DeTomaso at server.detomasolist.com
> > [4][319][317]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to
forward
> any message posted here to all past, current, or future members
of the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[318]320]DeTomaso at server.detomasolist.com
> [5][321][319]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [101][322][320]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
> 2. [102][323][321]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
> 3. [103][324][322]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
> 4. [104][325][323]http://server.detomasolist.com/mailman/listinfo/detom
aso
> 5. [105][326][324]http://server.detomasolist.com/mailman/listinfo/detom
aso
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image.jpeg
> Type: image/jpeg
> Size: 594482 bytes
> Desc: image.jpeg
> URL:
<[106][327][325]http://server.detomasolist.com/pipermail/detomaso/attachments
/201
60916/ed6ee2dd/attachment-0001.jpeg>
>
> ------------------------------
>
> Message: 18
> Date: Fri, 16 Sep 2016 14:18:39 -0700
> From: Mike Drew [328][326]<MikeLDrew at aol.com>
> To: Julian Kift [329][327]<julian_kift at hotmail.com>
> Cc: David Nunn [330][328]<dnunn at telus.net>, [331][329]"detomaso at server.deto
masolist.c
om"
> [332][330]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Message-ID: [333][331]<7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com>
> Content-Type: text/plain; charset=us-ascii
>
> Julian,
>
> Yes, he mentioned two different products for different applications
but only had a link for the stock replacement idler. My photo shows the
idler that replaces the alternator to tension the water pump belt.
>
> Mike
>
> Sent from my iPhone
>
> On Sep 16, 2016, at 14:16, Julian Kift [334][332]<julian_kift at hotmail.com>
wrote:
>
>> Mike,
>>
>> It gets even better, that looks to be a different idler again,
the one
>> that was previously linked appears to go in the stock location,
but was
>> adjustable from the front negating the usual need to get a wrench
on
>> the rear.
>> Julian
>>
__________________________________________________________________
>>
>> From: DeTomaso [335][333]<detomaso-bounces at server.detomasolist.com> on
behalf of
>> Mike Drew via DeTomaso [336][334]<detomaso at server.detomasolist.com>
>> Sent: Friday, September 16, 2016 2:11 PM
>> To: David Nunn
>> Cc: [337][335]<detomaso at server.detomasolist.com>
>> Subject: Re: [DeTomaso] Sanden Compressors noises
>>
>> All,
>> Here is a photo of the IPSCO water pump idler pulley setup. Note
there
>> is no alternator in view, as this car is fitted with a flat
firewall
>> kit that moves the alternator outboard of the A/C system.
>>
[[338][336]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
]
>> Mike
>> Sent from my iPhone
>> On Sep 15, 2016, at 15:41, "David Nunn" [339][337]<dnunn at telus.net> wro
te:
>>> Rob,
>>>
>>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
It
>>> eliminates the "fitted", non-adjustable belt and makes it
>> adjustable.
>>> It sure makes installation a lot easier. It's not listed on
IPSCO's
>> web
>>> site so you have to call or e-mail to get details.
>>>
>>> Also, IPSCO has an idler pulley kit that makes installation and
>> belt
>>> tensioning a breeze.
>>>
>>> [1][340][338]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>>>
>>> References
>>>
>>> 1. [1][341][339]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>> [2][Idler%20Pulley.jpg]
>> [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
>> [107]www.ipsco.org
>> Pantera Idler Pulley Assembly . Replacement for factory Idler
Pulley,
>> this assembly allow adjustment without trying to hold a wrench
behind
>> the bracket to tighten in ...
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [[340]342]DeTomaso at server.detomasolist.com
>>> [4][343][341]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>>> Members who post to this list grant license to the list to forward
>> any message posted here to all past, current, or future members
of the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[342]344]DeTomaso at server.detomasolist.com
>> [5][345][343]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>> Members who post to this list grant license to the list to
forward any
>> message posted here to all past, current, or future members of
the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>>
>> References
>>
>> 1. [108][346][344]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 2. [109][347][345]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 3. [110][348][346]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 4. [111][349][347]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> 5. [112][350][348]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[349]351]DeTomaso at server.detomasolist.com
>> [113][352][350]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
> ------------------------------
>
> Message: 19
> Date: Fri, 16 Sep 2016 14:19:14 -0700
> From: Larry Finch [353][351]<fresnofinches at aol.com>
> To: Email List Address For Posting [354][352]<detomaso at server.detomasolist.
com>
> Subject: Re: [DeTomaso] McLeod hydraulic throw out
> Message-ID: [355][353]<78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com>
> Content-Type: text/plain; charset=utf-8
>
> Heat?
>
> As I previously wrote, I have over 50,000 miles using one of the
McLeod systems.
>
> Those 50,000 miles have all been WITH a black plastic plug in the
hole that some wish to call a ventilation hole rather than an
inspection hole. Your choice, I don't really care.
>
> Whatever heat issues may or may not be present, with or without a
plug, have never appeared to be an issue in any way, shape or form in
my many years of experience.
>
> I am all ears if Larry or anyone else has history that supports a
failure of the McLeod unit from excessive heat.
>
> Larry
>
> Sent from me using a magic, handheld electronic gizmo.
>
>> On Sep 16, 2016, at 1:53 PM, Larry Stock [356][354]<larrys at panteraparts.co
m>
wrote:
>>
>> The basic problem is that the bell housing is too confined and not
>> ventilated well enough to dissipate the heat. The Superformance is
using a
>> Quick Time bell housing that has much more ventilation than the
DeTomaso
>> Bell housing. Just another reason not to run those Plugs that some
vendors
>> offer, that close off the inspection hole at the left hand top of
the bell
>> housing. That is the only heat dissipation vent there is.
>> Larry
>>
>> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
>> [357][355]<detomaso-bounces at server.detomasolist.com on behalf of
>> [[356]358]will.kooiman at gmail.com> wrote:
>>
>>> Wow.
>>>
>>> I have one in my Cobra, and so far it has worked perfectly.
>>>
>>> My Cobra came with an external slave from a Volvo that was readily
>>> available 20 years ago, but is now unobtanium. Rather than
building a new
>>> bracket for a different slave, I switched to a McLeod slave.
>>>
>>> At any rate, as I said, it has worked perfectly - so far.
>>>
>>> --
>>> Will
>>>
>>>
>>>
>>>
>>>
>>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
>>> [359][357]<detomaso at server.detomasolist.com> wrote:
>>>
>>>> Cullen,
>>>>
>>>> 2511 came equipped with one of those from Dennis when I purchased
it in
>>>> 2002. Since then I have rebuilt the unit twice (three?) and most
recently
>>>> did so using what I believe to be their current offering. I spoke
with
>>>> and ordered directly from McLeod.
>>>>
>>>> My opinion, in brief, is a very simple "NO!!"
>>>>
>>>> The current offering was shipped to me with an incorrect input
snout
>>>> spacer (I solved that by using the old spacer which luckily I
still had
>>>> on hand), and the stainless steel input line, due to its 90?
fitting
>>>> where one should have used a 45? fitting, twisted itself, unseen
of
>>>> course, within the bell housing when it was connected to the hard
line
>>>> attached to the chassis rails. Even stainless steel lines don't
hold up
>>>> very long against grinding by a pressure plate.
>>>>
>>>> The stainless steel bleed line is about 4 inches too long,
sticking
>>>> outside the bell housing in a terrible display of ugly.
>>>>
>>>> Finally, my last experience started with me ordering the same
rebuild kit
>>>> I had previously used, using the same number off of the previous
invoice.
>>>> What I received from them was the rebuild kit for the current unit
which
>>>> uses an entirely different set of all rings. I ultimately
determined that
>>>> for all three generations of their hydraulic bearing McLeod has
used
>>>> exactly the same rebuild kit part number. They added no suffix
such as a
>>>> A or a ?B which to me seems indicative of a problem within the
company.
>>>> No, they no longer support a rebuild kit for the first two
generations.
>>>>
>>>> While you have some experience in using one of these previously,
the task
>>>> of establishing proper free play and clearances is quite exacting
and
>>>> unforgiving. If you get it wrong there is nothing left to do but
pull the
>>>> transaxle and start all over again.
>>>>
>>>> The unit I have is now adjusted for the factory shortcomings and
as has
>>>> been my experience for over 50,000 miles, the system works just
fine.
>>>> Dennis however no longer recommends their installation and based
on my
>>>> experience I would not encourage any other owners to venture down
that
>>>> road for themselves.
>>>>
>>>> Feel free to reach out to me off-line or by phone for more of the
gory
>>>> details.
>>>>
>>>> Larry
>>>>
>>>> Sent from me using a magic, handheld electronic gizmo.
>>>> _______________________________________________
>>>>
>>>>
>>>> Detomaso Email List is not managed by POCA
>>>> Posted emails must not exceed 1.5 Megabytes
>>>> DeTomaso mailing list
>>>> [[358]360]DeTomaso at server.detomasolist.com
>>>> [114][361][359]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>>
>>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>>> the links above.
>>>>
>>>> Members who post to this list grant license to the list to forward
any
>>>> message posted here to all past, current, or future members of the
list.
>>>> They also grant the list owner permission to maintain an archive
or
>>>> approve the archiving of list messages.
>>>
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [[360]362]DeTomaso at server.detomasolist.com
>>> [115][363][361]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>> the links above.
>>>
>>> Members who post to this list grant license to the list to forward
any
>>> message posted here to all past, current, or future members of the
list.
>>> They also grant the list owner permission to maintain an archive or
>>> approve the archiving of list messages.
>>
>
>
> ------------------------------
>
> Message: 20
> Date: Fri, 16 Sep 2016 16:38:06 -0500
> From: Cullen McCann [364][362]<cmccann1972 at gmail.com>
> To: Larry Stock [365][363]<larrys at panteraparts.com>
> Cc: Email List Address For Posting
[366][364]<detomaso at server.detomasolist.com>,
> Larry Finch [367][365]<fresnofinches at aol.com>
> Subject: Re: [DeTomaso] McLeod hydraulic throw out
> Message-ID:
>
[368][366]<CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmail.com
>
> Content-Type: text/plain; charset="utf-8"
>
> well, I have the quicktime bellhousing for the ZF on 4653. I forgot
to
> mention that. Also didn't consider it would be relevant. hmmmm.
>
> On Fri, Sep 16, 2016 at 3:53 PM, Larry Stock
[369][367]<larrys at panteraparts.com>
> wrote:
>
>> The basic problem is that the bell housing is too confined and not
>> ventilated well enough to dissipate the heat. The Superformance is
using a
>> Quick Time bell housing that has much more ventilation than the
DeTomaso
>> Bell housing. Just another reason not to run those Plugs that some
vendors
>> offer, that close off the inspection hole at the left hand top of
the bell
>> housing. That is the only heat dissipation vent there is.
>> Larry
>>
>> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
>> [370][368]<detomaso-bounces at server.detomasolist.com on behalf of
>> [[369]371]will.kooiman at gmail.com> wrote:
>>
>>> Wow.
>>>
>>> I have one in my Cobra, and so far it has worked perfectly.
>>>
>>> My Cobra came with an external slave from a Volvo that was readily
>>> available 20 years ago, but is now unobtanium. Rather than
building a new
>>> bracket for a different slave, I switched to a McLeod slave.
>>>
>>> At any rate, as I said, it has worked perfectly - so far.
>>>
>>> --
>>> Will
>>>
>>>
>>>
>>>
>>>
>>> On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
>>> [372][370]<detomaso at server.detomasolist.com> wrote:
>>>
>>>> Cullen,
>>>>
>>>> 2511 came equipped with one of those from Dennis when I purchased
it in
>>>> 2002. Since then I have rebuilt the unit twice (three?) and most
recently
>>>> did so using what I believe to be their current offering. I spoke
with
>>>> and ordered directly from McLeod.
>>>>
>>>> My opinion, in brief, is a very simple "NO!!"
>>>>
>>>> The current offering was shipped to me with an incorrect input
snout
>>>> spacer (I solved that by using the old spacer which luckily I
still had
>>>> on hand), and the stainless steel input line, due to its 90?
fitting
>>>> where one should have used a 45? fitting, twisted itself, unseen
of
>>>> course, within the bell housing when it was connected to the hard
line
>>>> attached to the chassis rails. Even stainless steel lines don't
hold up
>>>> very long against grinding by a pressure plate.
>>>>
>>>> The stainless steel bleed line is about 4 inches too long,
sticking
>>>> outside the bell housing in a terrible display of ugly.
>>>>
>>>> Finally, my last experience started with me ordering the same
rebuild kit
>>>> I had previously used, using the same number off of the previous
invoice.
>>>> What I received from them was the rebuild kit for the current unit
which
>>>> uses an entirely different set of all rings. I ultimately
determined that
>>>> for all three generations of their hydraulic bearing McLeod has
used
>>>> exactly the same rebuild kit part number. They added no suffix
such as a
>>>> ? A or a ?B which to me seems indicative of a problem within the
company.
>>>> No, they no longer support a rebuild kit for the first two
generations.
>>>>
>>>> While you have some experience in using one of these previously,
the task
>>>> of establishing proper free play and clearances is quite exacting
and
>>>> unforgiving. If you get it wrong there is nothing left to do but
pull the
>>>> transaxle and start all over again.
>>>>
>>>> The unit I have is now adjusted for the factory shortcomings and
as has
>>>> been my experience for over 50,000 miles, the system works just
fine.
>>>> Dennis however no longer recommends their installation and based
on my
>>>> experience I would not encourage any other owners to venture down
that
>>>> road for themselves.
>>>>
>>>> Feel free to reach out to me off-line or by phone for more of the
gory
>>>> details.
>>>>
>>>> Larry
>>>>
>>>> Sent from me using a magic, handheld electronic gizmo.
>>>> _______________________________________________
>>>>
>>>>
>>>> Detomaso Email List is not managed by POCA
>>>> Posted emails must not exceed 1.5 Megabytes
>>>> DeTomaso mailing list
>>>> [[371]373]DeTomaso at server.detomasolist.com
>>>> [116][374][372]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>>
>>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>>> the links above.
>>>>
>>>> Members who post to this list grant license to the list to forward
any
>>>> message posted here to all past, current, or future members of the
list.
>>>> They also grant the list owner permission to maintain an archive
or
>>>> approve the archiving of list messages.
>>>
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [[373]375]DeTomaso at server.detomasolist.com
>>> [117][376][374]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.) use
>>> the links above.
>>>
>>> Members who post to this list grant license to the list to forward
any
>>> message posted here to all past, current, or future members of the
list.
>>> They also grant the list owner permission to maintain an archive or
>>> approve the archiving of list messages.
>>>
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[375]377]DeTomaso at server.detomasolist.com
>> [118][378][376]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
>> the links above.
>>
>> Members who post to this list grant license to the list to forward
any
>> message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or
approve
>> the archiving of list messages.
>>
> -------------- next part --------------
> well, I have the quicktime bellhousing for the ZF on 4653. I
forgot to
> mention that. Also didn't consider it would be relevant. hmmmm.
>
> On Fri, Sep 16, 2016 at 3:53 PM, Larry Stock
> [379][377]<[1]larrys at panteraparts.com> wrote:
>
> The basic problem is that the bell housing is too confined and
not
> ventilated well enough to dissipate the heat. The Superformance
is
> using a
> Quick Time bell housing that has much more ventilation than the
> DeTomaso
> Bell housing. Just another reason not to run those Plugs that
some
> vendors
> offer, that close off the inspection hole at the left hand top
of
> the bell
> housing. That is the only heat dissipation vent there is.
> Larry
> On 9/16/16, 1:26 PM, "DeTomaso on behalf of Will Kooiman"
> [380][378]<[2]detomaso-bounces at server.detomasolist.com on behalf of
> [[[379]381]3]will.kooiman at gmail.com> wrote:
> >Wow.
> >
> >I have one in my Cobra, and so far it has worked perfectly.
> >
> >My Cobra came with an external slave from a Volvo that was
readily
> >available 20 years ago, but is now unobtanium.A Rather than
> building a new
> >bracket for a different slave, I switched to a McLeod slave.
> >
> >At any rate, as I said, it has worked perfectly - so far.
> >
> >--
> >Will
> >
> >
> >
> >
> >
> >On 9/16/16 3:35 PM, "Larry Finch via DeTomaso"
> >[382][380]<[4]detomaso at server.detomasolist.com> wrote:
> >
> >>Cullen,
> >>
> >>2511 came equipped with one of those from Dennis when I
purchased
> it in
> >>2002. Since then I have rebuilt the unit twice (three?) and
most
> recently
> >>did so using what I believe to be their current offering. I
spoke
> with
> >>and ordered directly from McLeod.
> >>
> >>My opinion, in brief, is a very simple "NO!!"
> >>
> >>The current offering was shipped to me with an incorrect
input
> snout
> >>spacer (I solved that by using the old spacer which luckily I
> still had
> >>on hand), and the stainless steel input line, due to its
90ADEG
> fitting
> >>where one should have used a 45ADEG fitting, twisted itself,
> unseen of
> >>course, within the bell housing when it was connected to the
hard
> line
> >>attached to the chassis rails. Even stainless steel lines
don't
> hold up
> >>very long against grinding by a pressure plate.
> >>
> >>The stainless steel bleed line is about 4 inches too long,
> sticking
> >>outside the bell housing in a terrible display of ugly.
> >>
> >>Finally, my last experience started with me ordering the same
> rebuild kit
> >>I had previously used, using the same number off of the
previous
> invoice.
> >>What I received from them was the rebuild kit for the current
unit
> which
> >>uses an entirely different set of all rings. I ultimately
> determined that
> >>for all three generations of their hydraulic bearing McLeod
has
> used
> >>exactly the same rebuild kit part number. They added no
suffix
> such as a
> >>A A or a AB which to me seems indicative of a problem within
the
> company.
> >>No, they no longer support a rebuild kit for the first two
> generations.
> >>
> >>While you have some experience in using one of these
previously,
> the task
> >>of establishing proper free play and clearances is quite
exacting
> and
> >>unforgiving. If you get it wrong there is nothing left to do
but
> pull the
> >>transaxle and start all over again.
> >>
> >>The unit I have is now adjusted for the factory shortcomings
and
> as has
> >>been my experience for over 50,000 miles, the system works
just
> fine.
> >>Dennis however no longer recommends their installation and
based
> on my
> >>experience I would not encourage any other owners to venture
down
> that
> >>road for themselves.
> >>
> >>Feel free to reach out to me off-line or by phone for more of
the
> gory
> >>details.
> >>
> >>Larry
> >>
> >>Sent from me using a magic, handheld electronic gizmo.
>
> >>_______________________________________________
> >>
> >>
> >>Detomaso Email List is not managed by POCA
> >>Posted emails must not exceed 1.5 Megabytes
> >>DeTomaso mailing list
> >>[[[381]383]5]DeTomaso at server.detomasolist.com
> >>[6][384][382]http://server.detomasolist.com/mailman/listinfo/detomaso
> >>
> >>To manage your subscription (change email address, unsubscribe,
etc.)
> use
> >>the links above.
> >>
> >>Members who post to this list grant license to the list to
forward
> any
> >>message posted here to all past, current, or future members of
the
> list.
> >>They also grant the list owner permission to maintain an
archive or
> >>approve the archiving of list messages.
> >
> >
> >_______________________________________________
> >
> >
> >Detomaso Email List is not managed by POCA
> >Posted emails must not exceed 1.5 Megabytes
> >DeTomaso mailing list
> >[[[383]385]7]DeTomaso at server.detomasolist.com
> >[8][386][384]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> >To manage your subscription (change email address, unsubscribe,
etc.)
> use
> >the links above.
> >
> >Members who post to this list grant license to the list to
forward any
> >message posted here to all past, current, or future members of
the
> list.
> >They also grant the list owner permission to maintain an archive
or
> >approve the archiving of list messages.
> >
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[[385]387]9]DeTomaso at server.detomasolist.com
> [10][388][386]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [119][389][387]mailto:larrys at panteraparts.com
> 2. [120][390][388]mailto:detomaso-bounces at server.detomasolist.com
> 3. [121][391][389]mailto:will.kooiman at gmail.com
> 4. [122][392][390]mailto:detomaso at server.detomasolist.com
> 5. [123][393][391]mailto:DeTomaso at server.detomasolist.com
> 6. [124][394][392]http://server.detomasolist.com/mailman/listinfo/detom
aso
> 7. [125][395][393]mailto:DeTomaso at server.detomasolist.com
> 8. [126][396][394]http://server.detomasolist.com/mailman/listinfo/detom
aso
> 9. [127][397][395]mailto:DeTomaso at server.detomasolist.com
> 10. [128][398][396]http://server.detomasolist.com/mailman/listinfo/detom
aso
>
> ------------------------------
>
> Message: 21
> Date: Fri, 16 Sep 2016 21:46:51 +0000
> From: michael frazier [399][397]<red3644 at hotmail.com>
> To: [400][398]"detomaso at server.detomasolist.com"
> [401][399]<detomaso at server.detomasolist.com>
> Subject: [DeTomaso] NPC, Need transmission suggestions
> Message-ID:
>
[402][400]<SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07.prod
.out
look.com>
>
> Content-Type: text/plain; charset="utf-8"
>
> Hi All,
> I?m putting a 1951 Ford truck back on the road. It sat in a barn
since 1961 and only has 25k miles,
> but those were farm miles and it is beat though not rusted out.
Beautiful Rat Rod patina that will
> remain. The frame is boxed and cross braced, and holds a complete
Jaguar XJ suspension front and back.
> I plan to run a spare Cleveland, actually a real Boss 351, and want
an overdrive transmission. Manual or
> automatic, either one. It won?t be drag raced but will be used
regularly and would likely be run in an
> open road race some time. That?s the reason for the overdrive.
>
> I?ve been out of this part of the game for a while and was wondering
what would work well.
> What would bolt up and work. What would it come out of?
>
> Any info and ideas would be greatly appreciated.
> Michael
>
> Sent from Mail<[129][403][401]https://go.microsoft.com/fwlink/?LinkId=55098
6>
for Windows 10
>
> -------------- next part --------------
> Hi All,
>
> I'm putting a 1951 Ford truck back on the road. It sat in a barn
since
> 1961 and only has 25k miles,
>
> but those were farm miles and it is beat though not rusted out.
> Beautiful Rat Rod patina that will
>
> remain. The frame is boxed and cross braced, and holds a
complete
> Jaguar XJ suspension front and back.
>
> I plan to run a spare Cleveland, actually a real Boss 351, and
want an
> overdrive transmission. Manual or
>
> automatic, either one. It won't be drag raced but will be used
> regularly and would likely be run in an
>
> open road race some time. That's the reason for the overdrive.
>
>
> I've been out of this part of the game for a while and was
wondering
> what would work well.
>
> What would bolt up and work. What would it come out of?
>
>
> Any info and ideas would be greatly appreciated.
>
> Michael
>
>
> Sent from [1]Mail for Windows 10
>
> References
>
> 1. [130][404][402]https://go.microsoft.com/fwlink/?LinkId=550986
>
> ------------------------------
>
> Message: 22
> Date: Fri, 16 Sep 2016 15:04:46 -0700
> From: "David Nunn" [405][403]<dnunn at telus.net>
> To: "'Mike Drew'" [406][404]<MikeLDrew at aol.com>, "'Julian Kift'"
> [407][405]<julian_kift at hotmail.com>
> Cc: [[406]408]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Message-ID: [409][407]<003301d21066$5739cc80$05ad6580$@telus.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Julian,
>
> Further to what Mike wrote; here's a photo of the front of my engine,
with
> both IPSCO items installed.
>
> David
>
>
> -----Original Message-----
> From: Mike Drew [[131][410][408]mailto:MikeLDrew at aol.com]
> Sent: September 16, 2016 2:19 PM
> To: Julian Kift [411][409]<julian_kift at hotmail.com>
> Cc: David Nunn [412][410]<dnunn at telus.net>; [[411]413]detomaso at server.detom
asolist.co
m
> Subject: Re: [DeTomaso] Sanden Compressors noises
>
> Julian,
>
> Yes, he mentioned two different products for different applications
but only
> had a link for the stock replacement idler. My photo shows the idler
that
> replaces the alternator to tension the water pump belt.
>
> Mike
>
> Sent from my iPhone
>
> On Sep 16, 2016, at 14:16, Julian Kift [414][412]<julian_kift at hotmail.com>
wrote:
>
>> Mike,
>>
>> It gets even better, that looks to be a different idler again,
the one
>> that was previously linked appears to go in the stock location,
but was
>> adjustable from the front negating the usual need to get a wrench
on
>> the rear.
>> Julian
>>
__________________________________________________________________
>>
>> From: DeTomaso [415][413]<detomaso-bounces at server.detomasolist.com> on
behalf of
>> Mike Drew via DeTomaso [416][414]<detomaso at server.detomasolist.com>
>> Sent: Friday, September 16, 2016 2:11 PM
>> To: David Nunn
>> Cc: [417][415]<detomaso at server.detomasolist.com>
>> Subject: Re: [DeTomaso] Sanden Compressors noises
>>
>> All,
>> Here is a photo of the IPSCO water pump idler pulley setup. Note
there
>> is no alternator in view, as this car is fitted with a flat
firewall
>> kit that moves the alternator outboard of the A/C system.
>>
[[418][416]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
]
>> Mike
>> Sent from my iPhone
>> On Sep 15, 2016, at 15:41, "David Nunn" [419][417]<dnunn at telus.net> wro
te:
>>> Rob,
>>>
>>> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
It
>>> eliminates the "fitted", non-adjustable belt and makes it
>> adjustable.
>>> It sure makes installation a lot easier. It's not listed on
IPSCO's
>> web
>>> site so you have to call or e-mail to get details.
>>>
>>> Also, IPSCO has an idler pulley kit that makes installation and
>> belt
>>> tensioning a breeze.
>>>
>>> [1][420][418]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>>>
>>> References
>>>
>>> 1. [1][421][419]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>> [2][Idler%20Pulley.jpg]
>> [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
>> [132]www.ipsco.org
>> Pantera Idler Pulley Assembly . Replacement for factory Idler
Pulley,
>> this assembly allow adjustment without trying to hold a wrench
behind
>> the bracket to tighten in ...
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA Posted emails must not
>>> exceed 1.5 Megabytes DeTomaso mailing list
>>> [[420]422]DeTomaso at server.detomasolist.com
>>> [4][423][421]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>>> Members who post to this list grant license to the list to forward
>> any message posted here to all past, current, or future members
of the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [[422]424]DeTomaso at server.detomasolist.com
>> [5][425][423]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe,
etc.)
>> use the links above.
>> Members who post to this list grant license to the list to
forward any
>> message posted here to all past, current, or future members of
the
>> list. They also grant the list owner permission to maintain an
archive
>> or approve the archiving of list messages.
>>
>> References
>>
>> 1. [133][426][424]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 2. [134][427][425]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 3. [135][428][426]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> 4. [136][429][427]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> 5. [137][430][428]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA Posted emails must not
>> exceed 1.5 Megabytes DeTomaso mailing list
>> [[429]431]DeTomaso at server.detomasolist.com
>> [138][432][430]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive or
approve
> the archiving of list messages.
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: AC bracket & pulleys_opt.jpg
> Type: image/jpeg
> Size: 219525 bytes
> Desc: not available
> URL:
<[139][433][431]http://server.detomasolist.com/pipermail/detomaso/attachments
/201
60916/e7e2256b/attachment-0001.jpg>
>
> ------------------------------
>
> Message: 23
> Date: Fri, 16 Sep 2016 16:26:53 -0600
> From: bill [434][432]<bill at incendium.com>
> To: michael frazier [435][433]<red3644 at hotmail.com>,
> [436][434]"detomaso at server.detomasolist.com"
[437][435]<detomaso at server.detomasolist.com>
> Subject: Re: [DeTomaso] NPC, Need transmission suggestions
> Message-ID:
[438][436]<asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com>
> Content-Type: text/plain; charset="utf-8"
>
> Michael:Screw that put a Ford flat head V8 in that suckered.?
>
>
>
> CheersBill MooreCalgary
> -------- Original message --------From: michael frazier
[439][437]<red3644 at hotmail.com> Date: 2016-09-16 3:46 PM (GMT-07:00) To:
[[438]440]detomaso at server.detomasolist.com Subject: [DeTomaso] NPC, Need
transmission suggestions
> Hi All,
> I?m putting a 1951 Ford truck back on the road.? It sat in a barn
since 1961 and only has 25k miles,
> but those were farm miles and it is beat though not rusted out.?
Beautiful Rat Rod patina that will
> remain.? The frame is boxed and cross braced, and holds a complete
Jaguar XJ suspension front and back.
> I plan to run a spare Cleveland, actually a real Boss 351, and want
an overdrive transmission.? Manual or
> automatic, either one.? It won?t be drag raced but will be used
regularly and would likely be run in an
> open road race some time.? That?s the reason for the overdrive.
>
> I?ve been out of this part of the game for a while and was wondering
what would work well.
> What would bolt up and work.? What would it come out of?
>
> Any info and ideas would be greatly appreciated.
> Michael
>
> Sent from Mail<[140][441][439]https://go.microsoft.com/fwlink/?LinkId=55098
6>
for Windows 10
>
>
> ?? Hi All,
>
> ?? I'm putting a 1951 Ford truck back on the road.? It sat in a barn
since
> ?? 1961 and only has 25k miles,
>
> ?? but those were farm miles and it is beat though not rusted out.
> ?? Beautiful Rat Rod patina that will
>
> ?? remain.? The frame is boxed and cross braced, and holds a complete
> ?? Jaguar XJ suspension front and back.
>
> ?? I plan to run a spare Cleveland, actually a real Boss 351, and
want an
> ?? overdrive transmission.? Manual or
>
> ?? automatic, either one.? It won't be drag raced but will be used
> ?? regularly and would likely be run in an
>
> ?? open road race some time.? That's the reason for the overdrive.
>
>
> ?? I've been out of this part of the game for a while and was
wondering
> ?? what would work well.
>
> ?? What would bolt up and work.? What would it come out of?
>
>
> ?? Any info and ideas would be greatly appreciated.
>
> ?? Michael
>
>
> ?? Sent from [1]Mail for Windows 10
>
> References
>
> ?? 1. [141][442][440]https://go.microsoft.com/fwlink/?LinkId=550986
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[441]443]DeTomaso at server.detomasolist.com
> [142][444][442]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> Michael:
>
> Screw that put a Ford flat head V8 in that suckered.
>
> Cheers
>
> Bill Moore
>
> Calgary
>
> -------- Original message --------
> From: michael frazier [445][443]<red3644 at hotmail.com>
> Date: 2016-09-16 3:46 PM (GMT-07:00)
> To: [[444]446]detomaso at server.detomasolist.com
> Subject: [DeTomaso] NPC, Need transmission suggestions
>
> Hi All,
> I'm putting a 1951 Ford truck back on the road. It sat in a barn
since
> 1961 and only has 25k miles,
> but those were farm miles and it is beat though not rusted out.
> Beautiful Rat Rod patina that will
> remain. The frame is boxed and cross braced, and holds a
complete
> Jaguar XJ suspension front and back.
> I plan to run a spare Cleveland, actually a real Boss 351, and
want an
> overdrive transmission. Manual or
> automatic, either one. It won't be drag raced but will be used
> regularly and would likely be run in an
> open road race some time. That's the reason for the overdrive.
> I've been out of this part of the game for a while and was
wondering
> what would work well.
> What would bolt up and work. What would it come out of?
> Any info and ideas would be greatly appreciated.
> Michael
> Sent from
Mail<[143][447][445]https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
> Hi All,
> I'm putting a 1951 Ford truck back on the road. It sat in a
barn
> since
> 1961 and only has 25k miles,
> but those were farm miles and it is beat though not rusted
out.
> Beautiful Rat Rod patina that will
> remain. The frame is boxed and cross braced, and holds a
complete
> Jaguar XJ suspension front and back.
> I plan to run a spare Cleveland, actually a real Boss 351, and
want
> an
> overdrive transmission. Manual or
> automatic, either one. It won't be drag raced but will be
used
> regularly and would likely be run in an
> open road race some time. That's the reason for the
overdrive.
> I've been out of this part of the game for a while and was
wondering
> what would work well.
> What would bolt up and work. What would it come out of?
> Any info and ideas would be greatly appreciated.
> Michael
> Sent from [1]Mail for Windows 10
> References
> 1. [144][448][446]https://go.microsoft.com/fwlink/?LinkId=550986
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[447]449]DeTomaso at server.detomasolist.com
> [145][450][448]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> ------------------------------
>
> Message: 24
> Date: Fri, 16 Sep 2016 16:31:46 -0600
> From: bill [451][449]<bill at incendium.com>
> To: David Nunn [452][450]<dnunn at telus.net>, 'Mike Drew' [453][451]<MikeLDre
w at aol.com>
,
> 'Julian Kift' [454][452]<julian_kift at hotmail.com>
> Cc: [[453]455]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Message-ID:
[456][454]<twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com>
> Content-Type: text/plain; charset="utf-8"
>
> Wow !,,,,
> That looks to nice to cover up.....
>
>
>
>
> CheersBill MooreCalgary
> -------- Original message --------From: David Nunn [457][455]<dnunn at telus.n
et>
Date: 2016-09-16 4:04 PM (GMT-07:00) To: 'Mike Drew'
[458][456]<MikeLDrew at aol.com>, 'Julian Kift' [459][457]<julian_kift at hotmail.c
om> Cc:
[[458]460]detomaso at server.detomasolist.com Subject: Re: [DeTomaso] Sanden
Compressors noises
> Julian,
>
> Further to what Mike wrote; here's a photo of the front of my engine,
with
> both IPSCO items installed.
>
> David
>
>
> -----Original Message-----
> From: Mike Drew [[146][461][459]mailto:MikeLDrew at aol.com]
> Sent: September 16, 2016 2:19 PM
> To: Julian Kift [462][460]<julian_kift at hotmail.com>
> Cc: David Nunn [463][461]<dnunn at telus.net>; [[462]464]detomaso at server.detom
asolist.co
m
> Subject: Re: [DeTomaso] Sanden Compressors noises
>
> Julian,
>
> Yes, he mentioned two different products for different applications
but only
> had a link for the stock replacement idler. My photo shows the idler
that
> replaces the alternator to tension the water pump belt.
>
> Mike
>
> Sent from my iPhone
>
> On Sep 16, 2016, at 14:16, Julian Kift [465][463]<julian_kift at hotmail.com>
wrote:
>
>> ?? Mike,
>>
>> ?? It gets even better, that looks to be a different idler again,
the one
>> ?? that was previously linked appears to go in the stock location,
but was
>> ?? adjustable from the front negating the usual need to get a wrench
on
>> ?? the rear.
>> ?? Julian
>> ????
__________________________________________________________________
>>
>> ?? From: DeTomaso [466][464]<detomaso-bounces at server.detomasolist.com> on
behalf of
>> ?? Mike Drew via DeTomaso [467][465]<detomaso at server.detomasolist.com>
>> ?? Sent: Friday, September 16, 2016 2:11 PM
>> ?? To: David Nunn
>> ?? Cc: [468][466]<detomaso at server.detomasolist.com>
>> ?? Subject: Re: [DeTomaso] Sanden Compressors noises
>>
>> ?? All,
>> ?? Here is a photo of the IPSCO water pump idler pulley setup. Note
there
>> ?? is no alternator in view, as this car is fitted with a flat
firewall
>> ?? kit that moves the alternator outboard of the A/C system.
>> ??
[[469][467]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
]
>> ?? Mike
>> ?? Sent from my iPhone
>> ?? On Sep 15, 2016, at 15:41, "David Nunn" [470][468]<dnunn at telus.net> wro
te:
>>> ? Rob,
>>>
>>> ? If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit.
It?
>>> eliminates the "fitted", non-adjustable belt and makes it
>> ?? adjustable.
>>> ? It sure makes installation a lot easier. It's not listed on
IPSCO's
>> ?? web
>>> ? site so you have to call or e-mail to get details.
>>>
>>> ? Also, IPSCO has an idler pulley kit that makes installation and
>> ?? belt
>>> ? tensioning a breeze.
>>>
>>> ? [1][471][469]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>>>
>>> References
>>>
>>> ? 1. [1][472][470]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
>> ?? [2][Idler%20Pulley.jpg]
>> ?? [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ...
>> ?? [147]www.ipsco.org
>> ?? Pantera Idler Pulley Assembly . Replacement for factory Idler
Pulley,
>> ?? this assembly allow adjustment without trying to hold a wrench
behind
>> ?? the bracket to tighten in ...
>>> _______________________________________________
>>>
>>>
>>> Detomaso Email List is not managed by POCA Posted emails must not
>>> exceed 1.5 Megabytes DeTomaso mailing list
>>> [[471]473]DeTomaso at server.detomasolist.com
>>> [4][474][472]http://server.detomasolist.com/mailman/listinfo/detomaso
>>>
>>> To manage your subscription (change email address, unsubscribe,
etc.)
>> ?? use the links above.
>>> Members who post to this list grant license to the list to forward
>> ?? any message posted here to all past, current, or future members
of the
>> ?? list. They also grant the list owner permission to maintain an
archive
>> ?? or approve the archiving of list messages.
>> ?? _______________________________________________
>> ?? Detomaso Email List is not managed by POCA
>> ?? Posted emails must not exceed 1.5 Megabytes
>> ?? DeTomaso mailing list
>> ?? [[473]475]DeTomaso at server.detomasolist.com
>> ?? [5][476][474]http://server.detomasolist.com/mailman/listinfo/detomaso
>> ?? To manage your subscription (change email address, unsubscribe,
etc.)
>> ?? use the links above.
>> ?? Members who post to this list grant license to the list to
forward any
>> ?? message posted here to all past, current, or future members of
the
>> ?? list. They also grant the list owner permission to maintain an
archive
>> ?? or approve the archiving of list messages.
>>
>> References
>>
>> ?? 1. [148][477][475]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> ?? 2. [149][478][476]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> ?? 3. [150][479][477]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.h
tm
>> ?? 4. [151][480][478]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> ?? 5. [152][481][479]http://server.detomasolist.com/mailman/listinfo/detom
aso
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA Posted emails must not
>> exceed 1.5 Megabytes DeTomaso mailing list
>> [[480]482]DeTomaso at server.detomasolist.com
>> [153][483][481]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive or
approve
> the archiving of list messages.
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[482]484]DeTomaso at server.detomasolist.com
> [154][485][483]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> -------------- next part --------------
> Wow !,,,,
>
> That looks to nice to cover up.....
>
> Cheers
>
> Bill Moore
>
> Calgary
>
> -------- Original message --------
> From: David Nunn [486][484]<dnunn at telus.net>
> Date: 2016-09-16 4:04 PM (GMT-07:00)
> To: 'Mike Drew' [487][485]<MikeLDrew at aol.com>, 'Julian Kift'
> [488][486]<julian_kift at hotmail.com>
> Cc: [[487]489]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Sanden Compressors noises
>
> Julian,
> Further to what Mike wrote; here's a photo of the front of my
engine,
> with
> both IPSCO items installed.
> David
> -----Original Message-----
> From: Mike Drew [[155][490][488]mailto:MikeLDrew at aol.com]
> Sent: September 16, 2016 2:19 PM
> To: Julian Kift [491][489]<julian_kift at hotmail.com>
> Cc: David Nunn [492][490]<dnunn at telus.net>;
[[491]493]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Sanden Compressors noises
> Julian,
> Yes, he mentioned two different products for different
applications but
> only
> had a link for the stock replacement idler. My photo shows the
idler
> that
> replaces the alternator to tension the water pump belt.
> Mike
> Sent from my iPhone
> On Sep 16, 2016, at 14:16, Julian Kift [494][492]<julian_kift at hotmail.c
om>
wrote:
> > Mike,
> >
> > It gets even better, that looks to be a different idler
again, the
> one
> > that was previously linked appears to go in the stock
location, but
> was
> > adjustable from the front negating the usual need to get a
wrench
> on
> > the rear.
> > Julian
> >
>
__________________________________________________________________
> >
> > From: DeTomaso [495][493]<detomaso-bounces at server.detomasolist.com>
on
behalf
> of
> > Mike Drew via DeTomaso [496][494]<detomaso at server.detomasolist.com>
> > Sent: Friday, September 16, 2016 2:11 PM
> > To: David Nunn
> > Cc: [497][495]<detomaso at server.detomasolist.com>
> > Subject: Re: [DeTomaso] Sanden Compressors noises
> >
> > All,
> > Here is a photo of the IPSCO water pump idler pulley setup.
Note
> there
> > is no alternator in view, as this car is fitted with a flat
> firewall
> > kit that moves the alternator outboard of the A/C system.
> >
>
[[498][496]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
]
> > Mike
> > Sent from my iPhone
> > On Sep 15, 2016, at 15:41, "David Nunn" [499][497]<dnunn at telus.net>
wrote:
> >> Rob,
> >>
> >> If I'm not mistaken, IPSCO sells a kit that modifies Kirk's
kit.
> It
> >> eliminates the "fitted", non-adjustable belt and makes it
> > adjustable.
> >> It sure makes installation a lot easier. It's not listed on
IPSCO's
> > web
> >> site so you have to call or e-mail to get details.
> >>
> >> Also, IPSCO has an idler pulley kit that makes installation
and
> > belt
> >> tensioning a breeze.
> >>
> >> [1][500][498]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.ht
m
> >>
> >> References
> >>
> >> 1. [1][501][499]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley
.htm
> > [2][Idler%20Pulley.jpg]
> > [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking
...
> > [156]www.ipsco.org
> > Pantera Idler Pulley Assembly . Replacement for factory Idler
> Pulley,
> > this assembly allow adjustment without trying to hold a
wrench
> behind
> > the bracket to tighten in ...
> >> _______________________________________________
> >>
> >>
> >> Detomaso Email List is not managed by POCA Posted emails must
not
> >> exceed 1.5 Megabytes DeTomaso mailing list
> >> [[500]502]DeTomaso at server.detomasolist.com
> >> [4][503][501]http://server.detomasolist.com/mailman/listinfo/detomas
o
> >>
> >> To manage your subscription (change email address,
unsubscribe,
> etc.)
> > use the links above.
> >>
> >> Members who post to this list grant license to the list to
forward
> > any message posted here to all past, current, or future
members of
> the
> > list. They also grant the list owner permission to maintain
an
> archive
> > or approve the archiving of list messages.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [[502]504]DeTomaso at server.detomasolist.com
> > [5][505][503]http://server.detomasolist.com/mailman/listinfo/detoma
so
> > To manage your subscription (change email address,
unsubscribe,
> etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
forward
> any
> > message posted here to all past, current, or future members
of the
> > list. They also grant the list owner permission to maintain
an
> archive
> > or approve the archiving of list messages.
> >
> > References
> >
> > 1.
[157][506][504]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 2.
[158][507][505]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 3.
[159][508][506]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
> > 4.
[160][509][507]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 5.
[161][510][508]http://server.detomasolist.com/mailman/listinfo/detomaso
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA Posted emails must
not
> > exceed 1.5 Megabytes DeTomaso mailing list
> > [[509]511]DeTomaso at server.detomasolist.com
> > [162][512][510]http://server.detomasolist.com/mailman/listinfo/detoma
so
> >
> > To manage your subscription (change email address, unsubscribe,
etc.)
> use
> the links above.
> >
> > Members who post to this list grant license to the list to
forward
> any
> message posted here to all past, current, or future members of
the
> list.
> They also grant the list owner permission to maintain an archive
or
> approve
> the archiving of list messages.
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[511]513]DeTomaso at server.detomasolist.com
> [163][514][512]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to
forward any
> message posted here to all past, current, or future members of
the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[513]515]DeTomaso at server.detomasolist.com
> [164][516][514]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
>
> ------------------------------
>
> End of DeTomaso Digest, Vol 147, Issue 19
> *****************************************
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[515]517]DeTomaso at server.detomasolist.com
[165][518][516]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. [519][517]http://server.detomasolist.com/mailman/listinfo/detomaso
2. [520][518]http://server.detomasolist.com/mailman/listinfo/detomaso
3. [521][519]mailto:thimes at jpl.nasa.gov
4. [522][520]http://server.detomasolist.com/mailman/listinfo/detomaso
5. [523][521]mailto:thimes at jpl.nasa.gov
6. [524][522]mailto:detomaso-bounces at server.detomasolist.com
7. [525][523]mailto:demongusta at gmail.com
8. [526][524]mailto:detomaso at server.detomasolist.com
9. [527][525]mailto:detomaso at server.detomasolist.com
10. [528][526]mailto:detomaso at server.detomasolist.com
11. [529][527]mailto:detomaso at server.detomasolist.com
12. [530][528]mailto:DeTomaso at server.detomasolist.com
13. [531][529]http://server.detomasolist.com/mailman/listinfo/detomaso
14. [532][530]http://server.detomasolist.com/mailman/listinfo/detomaso
15. [533][531]http://centralwines.com/
16. [534][532]http://facebook.com/CentralLiquors
17. [535][533]mailto:DeTomaso at server.detomasolist.com
18. [536][534]http://server.detomasolist.com/mailman/listinfo/detomaso
19. [537][535]mailto:thimes at jpl.nasa.gov
20. [538][536]mailto:detomaso-bounces at server.detomasolist.com
21. [539][537]mailto:demongusta at gmail.com
22. [540][538]mailto:detomaso at server.detomasolist.com
23. [541][539]mailto:detomaso at server.detomasolist.com
24. [542][540]mailto:detomaso at server.detomasolist.com
25. [543][541]mailto:detomaso at server.detomasolist.com
26. [544][542]mailto:DeTomaso at server.detomasolist.com
27. [545][543]http://server.detomasolist.com/mailman/listinfo/detomaso
28. [546][544]http://server.detomasolist.com/mailman/listinfo/detomaso
29. [547][545]mailto:terry.himes at jpl.nasa.gov
30. [548][546]mailto:thimes at jpl.nasa.gov
31. [549][547]mailto:detomaso-bounces at server.detomasolist.com
32. [550][548]mailto:demongusta at gmail.com
33. [551][549]mailto:detomaso at server.detomasolist.com
34. [552][550]mailto:detomaso at server.detomasolist.com
35. [553][551]mailto:detomaso at server.detomasolist.com
36. [554][552]mailto:detomaso at server.detomasolist.com
37. [555][553]mailto:DeTomaso at server.detomasolist.com
38. [556][554]http://server.detomasolist.com/mailman/listinfo/detomaso
39. [557][555]http://server.detomasolist.com/mailman/listinfo/detomaso
40. [558][556]http://www.PanteraParts.com/
41. [559][557]http://server.detomasolist.com/mailman/listinfo/detomaso
42. [560][558]https://www.summitracing.com/parts/mcl-1402-22
43. [561][559]https://www.summitracing.com/parts/mcl-1402-22
44. [562][560]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/
unive
rsal/primary-fans.html
45. [563][561]http://server.detomasolist.com/mailman/listinfo/detomaso
46. [564][562]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/
unive
rsal/primary-fans.html
47. [565][563]mailto:DeTomaso at server.detomasolist.com
48. [566][564]http://server.detomasolist.com/mailman/listinfo/detomaso
49. [567][565]http://centralwines.com/
50. [568][566]http://facebook.com/CentralLiquors
51. [569][567]mailto:DeTomaso at server.detomasolist.com
52. [570][568]http://server.detomasolist.com/mailman/listinfo/detomaso
53. [571][569]http://centralwines.com/
54. [572][570]http://facebook.com/CentralLiquors
55. [573][571]mailto:mycars at comcast.net
56. [574][572]mailto:detomaso at server.detomasolist.com
57. [575][573]mailto:DeTomaso at server.detomasolist.com
58. [576][574]http://server.detomasolist.com/mailman/listinfo/detomaso
59. [577][575]http://weldwheels.com/shop/street-strip/sport-forged-wheels/pros
tar.h
tml
60. [578][576]http://centralwines.com/
61. [579][577]http://facebook.com/CentralLiquors
62. [580][578]mailto:mycars at comcast.net
63. [581][579]mailto:detomaso at server.detomasolist.com
64. [582][580]mailto:DeTomaso at server.detomasolist.com
65. [583][581]http://server.detomasolist.com/mailman/listinfo/detomaso
66. [584][582]http://server.detomasolist.com/mailman/listinfo/detomaso
67. [585][583]http://weldwheels.com/shop/street-strip/sport-forged-wheels/pros
tar.h
tml
68. [586][584]mailto:mycars at comcast.net
69. [587]mail[588][585]588]mailto:4]detomaso at server.detomasolist.com
70. [589]mail[590][586]590]mailto:5]DeTomaso at server.detomasolist.com
71. [591][587]http://server.detomasolist.com/mailman/listinfo/detomaso
72. [592][588]http://centralwines.com/
73. [593][589]http://facebook.com/CentralLiquors
74. [594][590]mailto:mycars at comcast.net
75. [595][591]mailto:detomaso at server.detomasolist.com
76. [596][592]mailto:DeTomaso at server.detomasolist.com
77. [597][593]http://server.detomasolist.com/mailman/listinfo/detomaso
78. [598][594]mailto:DeTomaso at server.detomasolist.com
79. [599][595]http://server.detomasolist.com/mailman/listinfo/detomaso
80. [600][596]http://server.detomasolist.com/mailman/listinfo/detomaso
81. [601][597]http://server.detomasolist.com/mailman/listinfo/detomaso
82. [602][598]http://server.detomasolist.com/mailman/listinfo/detomaso
83. [603][599]mailto:will.kooiman at gmail.com
84. [604][600]mailto:detomaso at server.detomasolist.com
85. [605][601]mailto:DeTomaso at server.detomasolist.com
86. [606][602]http://server.detomasolist.com/mailman/listinfo/detomaso
87. [607][603]mailto:DeTomaso at server.detomasolist.com
88. [608][604]http://server.detomasolist.com/mailman/listinfo/detomaso
89. [609][605]http://server.detomasolist.com/mailman/listinfo/detomaso
90. [610][606]http://server.detomasolist.com/mailman/listinfo/detomaso
91. [611][607]http://server.detomasolist.com/pipermail/detomaso/attachments/20
16091
6/33a69e52/attachment-0001.jpeg
92. [612][608]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
93. [613][609]http://server.detomasolist.com/mailman/listinfo/detomaso
94. [614][610]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
95. [615][611]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg]<[616][6
12]http://
[613]www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
96. [617][614]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
97. [618][615]http://www.ipsco.org/
98. [619][616]http://server.detomasolist.com/mailman/listinfo/detomaso
99. [620][617]http://server.detomasolist.com/mailman/listinfo/detomaso
100. [621][618]http://www.ipsco.org/
101. [622][619]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
102. [623][620]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
103. [624][621]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
104. [625][622]http://server.detomasolist.com/mailman/listinfo/detomaso
105. [626][623]http://server.detomasolist.com/mailman/listinfo/detomaso
106. [627][624]http://server.detomasolist.com/pipermail/detomaso/attachments/20
16091
6/ed6ee2dd/attachment-0001.jpeg
107. [628][625]http://www.ipsco.org/
108. [629][626]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
109. [630][627]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
110. [631][628]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
111. [632][629]http://server.detomasolist.com/mailman/listinfo/detomaso
112. [633][630]http://server.detomasolist.com/mailman/listinfo/detomaso
113. [634][631]http://server.detomasolist.com/mailman/listinfo/detomaso
114. [635][632]http://server.detomasolist.com/mailman/listinfo/detomaso
115. [636][633]http://server.detomasolist.com/mailman/listinfo/detomaso
116. [637][634]http://server.detomasolist.com/mailman/listinfo/detomaso
117. [638][635]http://server.detomasolist.com/mailman/listinfo/detomaso
118. [639][636]http://server.detomasolist.com/mailman/listinfo/detomaso
119. [640][637]mailto:larrys at panteraparts.com
120. [641][638]mailto:detomaso-bounces at server.detomasolist.com
121. [642][639]mailto:will.kooiman at gmail.com
122. [643][640]mailto:detomaso at server.detomasolist.com
123. [644][641]mailto:DeTomaso at server.detomasolist.com
124. [645][642]http://server.detomasolist.com/mailman/listinfo/detomaso
125. [646][643]mailto:DeTomaso at server.detomasolist.com
126. [647][644]http://server.detomasolist.com/mailman/listinfo/detomaso
127. [648][645]mailto:DeTomaso at server.detomasolist.com
128. [649][646]http://server.detomasolist.com/mailman/listinfo/detomaso
129. [650][647]https://go.microsoft.com/fwlink/?LinkId=550986
130. [651][648]https://go.microsoft.com/fwlink/?LinkId=550986
131. [652][649]mailto:MikeLDrew at aol.com
132. [653][650]http://www.ipsco.org/
133. [654][651]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
134. [655][652]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
135. [656][653]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
136. [657][654]http://server.detomasolist.com/mailman/listinfo/detomaso
137. [658][655]http://server.detomasolist.com/mailman/listinfo/detomaso
138. [659][656]http://server.detomasolist.com/mailman/listinfo/detomaso
139. [660][657]http://server.detomasolist.com/pipermail/detomaso/attachments/20
16091
6/e7e2256b/attachment-0001.jpg
140. [661][658]https://go.microsoft.com/fwlink/?LinkId=550986
141. [662][659]https://go.microsoft.com/fwlink/?LinkId=550986
142. [663][660]http://server.detomasolist.com/mailman/listinfo/detomaso
143. [664][661]https://go.microsoft.com/fwlink/?LinkId=550986
144. [665][662]https://go.microsoft.com/fwlink/?LinkId=550986
145. [666][663]http://server.detomasolist.com/mailman/listinfo/detomaso
146. [667][664]mailto:MikeLDrew at aol.com
147. [668][665]http://www.ipsco.org/
148. [669][666]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
149. [670][667]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
150. [671][668]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
151. [672][669]http://server.detomasolist.com/mailman/listinfo/detomaso
152. [673][670]http://server.detomasolist.com/mailman/listinfo/detomaso
153. [674][671]http://server.detomasolist.com/mailman/listinfo/detomaso
154. [675][672]http://server.detomasolist.com/mailman/listinfo/detomaso
155. [676][673]mailto:MikeLDrew at aol.com
156. [677][674]http://www.ipsco.org/
157. [678][675]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
158. [679][676]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
159. [680][677]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
160. [681][678]http://server.detomasolist.com/mailman/listinfo/detomaso
161. [682][679]http://server.detomasolist.com/mailman/listinfo/detomaso
162. [683][680]http://server.detomasolist.com/mailman/listinfo/detomaso
163. [684][681]http://server.detomasolist.com/mailman/listinfo/detomaso
164. [685][682]http://server.detomasolist.com/mailman/listinfo/detomaso
165. [686][683]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[684]687]DeTomaso at server.detomasolist.com
[688][685]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.
Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.
References
1. [686]mailto:detomaso-bounces at server.detomasolist.com
2. [687]mailto:owen at tadhgcooke.com
3. [688]mailto:detomaso at server.detomasolist.com
4. [689]mailto:detomaso-request at server.detomasolist.com
5. [690]mailto:detomaso at server.detomasolist.com
6. [691]http://server.detomasolist.com/mailman/listinfo/detomaso
7. [692]mailto:detomaso-request at server.detomasolist.com
8. [693]mailto:detomaso-owner at server.detomasolist.com
9. [694]mailto:demongusta at gmail.com
10. [695]mailto:detomaso at server.detomasolist.com
11. [696]mailto:detomaso at server.detomasolist.com
12. [697]mailto:detomaso at server.detomasolist.com
13. [698]mailto:detomaso at server.detomasolist.com
14. [699]mailto:CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com
15. [700]mailto:terry.himes at jpl.nasa.gov
16. [701]mailto:demongusta at gmail.com
17. [702]mailto:detomaso at server.detomasolist.com
18. [703]mailto:detomaso at server.detomasolist.com
19. [704]mailto:D4016E9F.92F3B%thimes at jpl.nasa.gov
20. [705]mailto:thimes at jpl.nasa.gov
21. [706]mailto:thimes at jpl.nasa.gov
22. [707]mailto:detomaso-bounces at server.detomasolist.com
23. [708]mailto:detomaso-bounces at server.detomasolist.com
24. [709]mailto:demongusta at gmail.com
25. [710]mailto:demongusta at gmail.com
26. [711]mailto:detomaso at server.detomasolist.com
27. [712]mailto:detomaso at server.detomasolist.com
28. [713]mailto:detomaso at server.detomasolist.com
29. [714]mailto:detomaso at server.detomasolist.com
30. [715]mailto:detomaso at server.detomasolist.com
31. [716]mailto:detomaso at server.detomasolist.com
32. [717]mailto:detomaso at server.detomasolist.com
33. [718]mailto:detomaso at server.detomasolist.com
34. [719]mailto:DeTomaso at server.detomasolist.com
35. [720]mailto:DeTomaso at server.detomasolist.com
36. [721]http://server.detomasolist.com/mailman/listinfo/detomaso
37. [722]mail[723]mailto:1]thimes at jpl.nasa.gov
38. mailto:[[724]2]detomaso-bounces at server.detomasolist.com
39. mailto:[[725]3]demongusta at gmail.com
40. mailto:[[726]4]detomaso at server.detomasolist.com
41. mailto:[[727]5]detomaso at server.detomasolist.com
42. mailto:[[728]6]detomaso at server.detomasolist.com
43. mailto:[[729]7]detomaso at server.detomasolist.com
44. [730]mail[731]mailto:8]DeTomaso at server.detomasolist.com
45. [732]http://server.detomasolist.com/mailman/listinfo/detomaso
46. [733]mailto:thimes at jpl.nasa.gov
47. [734]mailto:detomaso-bounces at server.detomasolist.com
48. [735]mailto:demongusta at gmail.com
49. [736]mailto:detomaso at server.detomasolist.com
50. [737]mailto:detomaso at server.detomasolist.com
51. [738]mailto:detomaso at server.detomasolist.com
52. [739]mailto:detomaso at server.detomasolist.com
53. [740]mailto:DeTomaso at server.detomasolist.com
54. [741]http://server.detomasolist.com/mailman/listinfo/detomaso
55. [742]mailto:mycars at comcast.net
56. [743]mailto:detomaso at server.detomasolist.com
57. [744]mailto:6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net
58. [745]mailto:lashdeep at yahoo.com
59. [746]mailto:mycars at comcast.net
60. [747]mailto:detomaso at server.detomasolist.com
61. [748]mailto:detomaso at server.detomasolist.com
62. [749]mailto:1287234121.1004140.1474045730621 at mail.yahoo.com
63. [750]mailto:mycars at comcast.net
64. [751]mailto:detomaso at server.detomasolist.com
65. [752]mailto:DeTomaso at server.detomasolist.com
66. [753]http://server.detomasolist.com/mailman/listinfo/detomaso
67. [754]mailto:mycars at comcast.net
68. [755]mailto:detomaso at server.detomasolist.com
69. [756]mail[757]mailto:3]DeTomaso at server.detomasolist.com
70. [758]http://server.detomasolist.com/mailman/listinfo/detomaso
71. [759]http://centralwines.com/
72. [760]http://facebook.com/CentralLiquors
73. [761]mailto:DeTomaso at server.detomasolist.com
74. [762]http://server.detomasolist.com/mailman/listinfo/detomaso
75. [763]mailto:demongusta at gmail.com
76. [764]mailto:terry.himes at jpl.nasa.gov
77. [765]mailto:detomaso at server.detomasolist.com
78. [766]mailto:detomaso at server.detomasolist.com
79. [767]mailto:09791B61-DE0D-40CC-859D-437A8528952A at gmail.com
80. [768]mailto:terry.himes at jpl.nasa.gov
81. [769]mailto:thimes at jpl.nasa.gov
82. [770]mailto:thimes at jpl.nasa.gov
83. [771]mailto:detomaso-bounces at server.detomasolist.com
84. [772]mailto:detomaso-bounces at server.detomasolist.com
85. [773]mailto:demongusta at gmail.com
86. [774]mailto:demongusta at gmail.com
87. [775]mailto:detomaso at server.detomasolist.com
88. [776]mailto:detomaso at server.detomasolist.com
89. [777]mailto:detomaso at server.detomasolist.com
90. [778]mailto:detomaso at server.detomasolist.com
91. [779]mailto:detomaso at server.detomasolist.com
92. [780]mailto:detomaso at server.detomasolist.com
93. [781]mailto:detomaso at server.detomasolist.com
94. [782]mailto:detomaso at server.detomasolist.com
95. [783]mailto:DeTomaso at server.detomasolist.com
96. [784]mailto:DeTomaso at server.detomasolist.com
97. [785]http://server.detomasolist.com/mailman/listinfo/detomaso
98. [786]http://server.detomasolist.com/mailman/listinfo/detomaso
99. mailto:[[787]1]terry.himes at jpl.nasa.gov
100. [788]mail[789]mailto:2]thimes at jpl.nasa.gov
101. mailto:[[790]3]detomaso-bounces at server.detomasolist.com
102. mailto:[[791]4]demongusta at gmail.com
103. mailto:[[792]5]detomaso at server.detomasolist.com
104. mailto:[[793]6]detomaso at server.detomasolist.com
105. mailto:[[794]7]detomaso at server.detomasolist.com
106. mailto:[[795]8]detomaso at server.detomasolist.com
107. [796]mail[797]mailto:9]DeTomaso at server.detomasolist.com
108. [798]http://server.detomasolist.com/mailman/listinfo/detomaso
109. [799]mailto:terry.himes at jpl.nasa.gov
110. [800]mailto:thimes at jpl.nasa.gov
111. [801]mailto:detomaso-bounces at server.detomasolist.com
112. [802]mailto:demongusta at gmail.com
113. [803]mailto:detomaso at server.detomasolist.com
114. [804]mailto:detomaso at server.detomasolist.com
115. [805]mailto:detomaso at server.detomasolist.com
116. [806]mailto:detomaso at server.detomasolist.com
117. [807]mailto:DeTomaso at server.detomasolist.com
118. [808]http://server.detomasolist.com/mailman/listinfo/detomaso
119. [809]mailto:demongusta at gmail.com
120. [810]mailto:GR2835 at comcast.net
121. [811]mailto:detomaso at server.detomasolist.com
122. [812]mailto:detomaso at server.detomasolist.com
123. [813]mailto:2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com
124. [814]mailto:GR2835 at comcast.net
125. [815]mailto:demongusta at gmail.com
126. [816]mailto:detomaso at server.detomasolist.com
127. [817]mailto:detomaso at server.detomasolist.com
128. [818]mailto:DeTomaso at server.detomasolist.com
129. [819]http://server.detomasolist.com/mailman/listinfo/detomaso
130. [820]mailto:larrys at panteraparts.com
131. [821]mailto:demongusta at gmail.com
132. [822]mailto:detomaso at server.detomasolist.com
133. [823]mailto:detomaso at server.detomasolist.com
134. [824]mailto:D4018324.17A0EF%larrys at panteraparts.com
135. [825]mailto:detomaso-bounces at server.detomasolist.comonbehalfof
136. [826]mailto:demongusta at gmail.com
137. [827]mailto:DeTomaso at server.detomasolist.com
138. [828]http://server.detomasolist.com/mailman/listinfo/detomaso
139. [829]mailto:cmccann1972 at gmail.com
140. [830]mailto:detomaso at server.detomasolist.com
141. [831]mailto:CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail
.com
142. [832]https://www.summitracing.com/parts/mcl-1402-22
143. [833]https://www.summitracing.com/parts/mcl-1402-22
144. [834]https://www.summitracing.com/parts/mcl-1402-22
145. [835]mailto:kenn_green at yahoo.com
146. [836]mailto:demongusta at gmail.com
147. [837]mailto:detomaso at server.detomasolist.com
148. [838]mailto:detomaso at server.detomasolist.com
149. [839]mailto:1796334072.2409059.1474054066544 at mail.yahoo.com
150. [840]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
151. [841]mailto:demongusta at gmail.com
152. [842]mailto:detomaso at server.detomasolist.com
153. [843]mailto:detomaso at server.detomasolist.com
154. [844]mailto:detomaso at server.detomasolist.com
155. [845]mailto:detomaso at server.detomasolist.com
156. [846]mailto:DeTomaso at server.detomasolist.com
157. [847]http://server.detomasolist.com/mailman/listinfo/detomaso
158. [848]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
159. [849]mailto:demongusta at gmail.com
160. [850]mailto:detomaso at server.detomasolist.com
161. [851]mailto:detomaso at server.detomasolist.com
162. [852]mailto:detomaso at server.detomasolist.com
163. [853]mailto:detomaso at server.detomasolist.com
164. [854]mail[855]mailto:2]DeTomaso at server.detomasolist.com
165. [856]http://server.detomasolist.com/mailman/listinfo/detomaso
166. [857]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
167. [858]mailto:DeTomaso at server.detomasolist.com
168. [859]http://server.detomasolist.com/mailman/listinfo/detomaso
169. [860]mailto:fresnofinches at aol.com
170. [861]mailto:detomaso at server.detomasolist.com
171. [862]mailto:6C366701-6502-47C0-A0DC-59494515D156 at aol.com
172. [863]mailto:mycars at comcast.net
173. [864]mailto:lashdeep at yahoo.com
174. [865]mailto:detomaso at server.detomasolist.com
175. [866]mailto:detomaso at server.detomasolist.com
176. [867]mailto:37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net
177. [868]http://centralwines.com/
178. [869]http://facebook.com/CentralLiquors
179. [870]mailto:mycars at comcast.net
180. [871]mailto:detomaso at server.detomasolist.com
181. [872]mailto:DeTomaso at server.detomasolist.com
182. [873]mailto:DeTomaso at server.detomasolist.com
183. [874]http://server.detomasolist.com/mailman/listinfo/detomaso
184. [875]mailto:mycars at comcast.net
185. [876]mail[877]mailto:4]detomaso at server.detomasolist.com
186. [878]mail[879]mailto:5]DeTomaso at server.detomasolist.com
187. [880]http://server.detomasolist.com/mailman/listinfo/detomaso
188. [881]http://centralwines.com/
189. [882]http://facebook.com/CentralLiquors
190. [883]mailto:mycars at comcast.net
191. [884]mailto:detomaso at server.detomasolist.com
192. [885]mailto:DeTomaso at server.detomasolist.com
193. [886]http://server.detomasolist.com/mailman/listinfo/detomaso
194. [887]mailto:mycars at comcast.net
195. [888]mailto:detomaso at server.detomasolist.com
196. [889]mailto:013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net
197. [890]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
198. [891]mailto:mycars at comcast.net
199. [892]mail[893]mailto:4]detomaso at server.detomasolist.com
200. [894]mail[895]mailto:5]DeTomaso at server.detomasolist.com
201. [896]http://server.detomasolist.com/mailman/listinfo/detomaso
202. [897]http://centralwines.com/
203. [898]http://facebook.com/CentralLiquors
204. [899]mailto:mycars at comcast.net
205. [900]mailto:detomaso at server.detomasolist.com
206. [901]mailto:DeTomaso at server.detomasolist.com
207. [902]http://server.detomasolist.com/mailman/listinfo/detomaso
208. [903]mailto:DeTomaso at server.detomasolist.com
209. [904]http://server.detomasolist.com/mailman/listinfo/detomaso
210. [905]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
211. [906]mailto:mycars at comcast.net
212. [907]mail[908]mailto:3]4]detomaso at server.detomasolist.com
213. [909]mail[910]mailto:4]5]DeTomaso at server.detomasolist.com
214. [911]http://server.detomasolist.com/mailman/listinfo/detomaso
215. [912]http://centralwines.com/
216. [913]http://facebook.com/CentralLiquors
217. [914]mailto:mycars at comcast.net
218. [915]mailto:detomaso at server.detomasolist.com
219. [916]mailto:DeTomaso at server.detomasolist.com
220. [917]http://server.detomasolist.com/mailman/listinfo/detomaso
221. [918]mail[919]mailto:12]DeTomaso at server.detomasolist.com
222. [920]http://server.detomasolist.com/mailman/listinfo/detomaso
223. [921]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
224. [922]mailto:mycars at comcast.net
225. [923]mailto:4
226. [924]mailto:69][925]mailto:69]mailto:4]detomaso at server.detomasolist.com
227. [926]mailto:5
228. [927]mailto:70][928]mailto:70]mailto:5]DeTomaso at server.detomasolist.com
229. [929]http://server.detomasolist.com/mailman/listinfo/detomaso
230. [930]http://centralwines.com/
231. [931]http://facebook.com/CentralLiquors
232. [932]mailto:mycars at comcast.net
233. [933]mailto:detomaso at server.detomasolist.com
234. [934]mailto:DeTomaso at server.detomasolist.com
235. [935]http://server.detomasolist.com/mailman/listinfo/detomaso
236. [936]mailto:DeTomaso at server.detomasolist.com
237. [937]http://server.detomasolist.com/mailman/listinfo/detomaso
238. [938]mailto:will.kooiman at gmail.com
239. [939]mailto:fresnofinches at aol.com
240. [940]mailto:detomaso at server.detomasolist.com
241. [941]mailto:D401CD29.16A666%will.kooiman at gmail.com
242. [942]mailto:detomaso at server.detomasolist.com
243. [943]mailto:DeTomaso at server.detomasolist.com
244. [944]http://server.detomasolist.com/mailman/listinfo/detomaso
245. [945]mailto:cmccann1972 at gmail.com
246. [946]mailto:will.kooiman at gmail.com
247. [947]mailto:detomaso at server.detomasolist.com
248. [948]mailto:fresnofinches at aol.com
249. [949]mailto:CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail
.com
250. [950]mailto:will.kooiman at gmail.com
251. [951]mailto:detomaso at server.detomasolist.com
252. [952]mailto:DeTomaso at server.detomasolist.com
253. [953]http://server.detomasolist.com/mailman/listinfo/detomaso
254. [954]mailto:DeTomaso at server.detomasolist.com
255. [955]http://server.detomasolist.com/mailman/listinfo/detomaso
256. mailto:[[956]1]will.kooiman at gmail.com
257. mailto:[[957]2]detomaso at server.detomasolist.com
258. [958]mail[959]mailto:3]DeTomaso at server.detomasolist.com
259. [960]http://server.detomasolist.com/mailman/listinfo/detomaso
260. [961]mail[962]mailto:5]DeTomaso at server.detomasolist.com
261. [963]http://server.detomasolist.com/mailman/listinfo/detomaso
262. [964]mailto:will.kooiman at gmail.com
263. [965]mailto:detomaso at server.detomasolist.com
264. [966]mailto:DeTomaso at server.detomasolist.com
265. [967]http://server.detomasolist.com/mailman/listinfo/detomaso
266. [968]mailto:DeTomaso at server.detomasolist.com
267. [969]http://server.detomasolist.com/mailman/listinfo/detomaso
268. [970]mailto:larrys at panteraparts.com
269. [971]mailto:will.kooiman at gmail.com
270. [972]mailto:fresnofinches at aol.com
271. [973]mailto:detomaso at server.detomasolist.com
272. [974]mailto:D401A883.17A144%larrys at panteraparts.com
273. [975]mailto:detomaso-bounces at server.detomasolist.comonbehalfof
274. [976]mailto:will.kooiman at gmail.com
275. [977]mailto:detomaso at server.detomasolist.com
276. [978]mailto:DeTomaso at server.detomasolist.com
277. [979]http://server.detomasolist.com/mailman/listinfo/detomaso
278. [980]mailto:DeTomaso at server.detomasolist.com
279. [981]http://server.detomasolist.com/mailman/listinfo/detomaso
280. [982]mailto:MikeLDrew at aol.com
281. [983]mailto:dnunn at telus.net
282. [984]mailto:detomaso at server.detomasolist.com
283. [985]mailto:detomaso at server.detomasolist.com
284. [986]mailto:C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com
285. [987]http://server.detomasolist.com/pipermail/detomaso/attachments/2016
286. [988]mailto:dnunn at telus.net
287. [989]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
288. [990]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
289. [991]mailto:DeTomaso at server.detomasolist.com
290. [992]http://server.detomasolist.com/mailman/listinfo/detomaso
291. [993]mailto:julian_kift at hotmail.com
292. [994]mailto:dnunn at telus.net
293. [995]mailto:MikeLDrew at aol.com
294. [996]mailto:detomaso at server.detomasolist.com
295. [997]mailto:detomaso at server.detomasolist.com
296. [998]mailto:CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.
prod.outlook.com
297. [999]mailto:detomaso-bounces at server.detomasolist.com
298. [1000]mailto:detomaso at server.detomasolist.com
299. [1001]mailto:detomaso at server.detomasolist.com
300. [1002]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
301. [1003]mailto:dnunn at telus.net
302. [1004]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
303. [1005]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
304. [1006]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
305. [1007]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
306. [1008]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
307. [1009]mailto:DeTomaso at server.detomasolist.com
308. [1010]http://server.detomasolist.com/mailman/listinfo/detomaso
309. [1011]mailto:DeTomaso at server.detomasolist.com
310. [1012]http://server.detomasolist.com/mailman/listinfo/detomaso
311. [1013]mailto:detomaso-bounces at server.detomasolist.com
312. [1014]mailto:detomaso at server.detomasolist.com
313. [1015]mailto:detomaso at server.detomasolist.com
314. [1016]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
315. [1017]mailto:dnunn at telus.net
316. [1018]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
317. [1019]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
318. [1020]mailto:DeTomaso at server.detomasolist.com
319. [1021]http://server.detomasolist.com/mailman/listinfo/detomaso
320. [1022]mailto:DeTomaso at server.detomasolist.com
321. [1023]http://server.detomasolist.com/mailman/listinfo/detomaso
322. [1024]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
323. [1025]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
324. [1026]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
325. [1027]http://server.detomasolist.com/mailman/listinfo/detomaso
326. [1028]http://server.detomasolist.com/mailman/listinfo/detomaso
327. [1029]http://server.detomasolist.com/pipermail/detomaso/attachments/201
328. [1030]mailto:MikeLDrew at aol.com
329. [1031]mailto:julian_kift at hotmail.com
330. [1032]mailto:dnunn at telus.net
331. [1033]mailto:detomaso at server.detomasolist.com
332. [1034]mailto:detomaso at server.detomasolist.com
333. [1035]mailto:7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com
334. [1036]mailto:julian_kift at hotmail.com
335. [1037]mailto:detomaso-bounces at server.detomasolist.com
336. [1038]mailto:detomaso at server.detomasolist.com
337. [1039]mailto:detomaso at server.detomasolist.com
338. [1040]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
339. [1041]mailto:dnunn at telus.net
340. [1042]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
341. [1043]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
342. [1044]mailto:DeTomaso at server.detomasolist.com
343. [1045]http://server.detomasolist.com/mailman/listinfo/detomaso
344. [1046]mailto:DeTomaso at server.detomasolist.com
345. [1047]http://server.detomasolist.com/mailman/listinfo/detomaso
346. [1048]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
347. [1049]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
348. [1050]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
349. [1051]http://server.detomasolist.com/mailman/listinfo/detomaso
350. [1052]http://server.detomasolist.com/mailman/listinfo/detomaso
351. [1053]mailto:DeTomaso at server.detomasolist.com
352. [1054]http://server.detomasolist.com/mailman/listinfo/detomaso
353. [1055]mailto:fresnofinches at aol.com
354. [1056]mailto:detomaso at server.detomasolist.com
355. [1057]mailto:78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com
356. [1058]mailto:larrys at panteraparts.com
357. [1059]mailto:detomaso-bounces at server.detomasolist.comonbehalfof
358. [1060]mailto:will.kooiman at gmail.com
359. [1061]mailto:detomaso at server.detomasolist.com
360. [1062]mailto:DeTomaso at server.detomasolist.com
361. [1063]http://server.detomasolist.com/mailman/listinfo/detomaso
362. [1064]mailto:DeTomaso at server.detomasolist.com
363. [1065]http://server.detomasolist.com/mailman/listinfo/detomaso
364. [1066]mailto:cmccann1972 at gmail.com
365. [1067]mailto:larrys at panteraparts.com
366. [1068]mailto:detomaso at server.detomasolist.com
367. [1069]mailto:fresnofinches at aol.com
368. [1070]mailto:CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmai
l.com
369. [1071]mailto:larrys at panteraparts.com
370. [1072]mailto:detomaso-bounces at server.detomasolist.comonbehalfof
371. [1073]mailto:will.kooiman at gmail.com
372. [1074]mailto:detomaso at server.detomasolist.com
373. [1075]mailto:DeTomaso at server.detomasolist.com
374. [1076]http://server.detomasolist.com/mailman/listinfo/detomaso
375. [1077]mailto:DeTomaso at server.detomasolist.com
376. [1078]http://server.detomasolist.com/mailman/listinfo/detomaso
377. [1079]mailto:DeTomaso at server.detomasolist.com
378. [1080]http://server.detomasolist.com/mailman/listinfo/detomaso
379. mailto:[[1081]1]larrys at panteraparts.com
380. mailto:[[1082]2]detomaso-bounces at server.detomasolist.comonbehalfof
381. [1083]mail[1084]mailto:3]will.kooiman at gmail.com
382. mailto:[[1085]4]detomaso at server.detomasolist.com
383. [1086]mail[1087]mailto:5]DeTomaso at server.detomasolist.com
384. [1088]http://server.detomasolist.com/mailman/listinfo/detomaso
385. [1089]mail[1090]mailto:7]DeTomaso at server.detomasolist.com
386. [1091]http://server.detomasolist.com/mailman/listinfo/detomaso
387. [1092]mail[1093]mailto:9]DeTomaso at server.detomasolist.com
388. [1094]http://server.detomasolist.com/mailman/listinfo/detomaso
389. [1095]mailto:larrys at panteraparts.com
390. [1096]mailto:detomaso-bounces at server.detomasolist.com
391. [1097]mailto:will.kooiman at gmail.com
392. [1098]mailto:detomaso at server.detomasolist.com
393. [1099]mailto:DeTomaso at server.detomasolist.com
394. [1100]http://server.detomasolist.com/mailman/listinfo/detomaso
395. [1101]mailto:DeTomaso at server.detomasolist.com
396. [1102]http://server.detomasolist.com/mailman/listinfo/detomaso
397. [1103]mailto:DeTomaso at server.detomasolist.com
398. [1104]http://server.detomasolist.com/mailman/listinfo/detomaso
399. [1105]mailto:red3644 at hotmail.com
400. [1106]mailto:detomaso at server.detomasolist.com
401. [1107]mailto:detomaso at server.detomasolist.com
402. [1108]mailto:SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07
.prod.outlook.com
403. [1109]https://go.microsoft.com/fwlink/?LinkId=550986
404. [1110]https://go.microsoft.com/fwlink/?LinkId=550986
405. [1111]mailto:dnunn at telus.net
406. [1112]mailto:MikeLDrew at aol.com
407. [1113]mailto:julian_kift at hotmail.com
408. [1114]mailto:detomaso at server.detomasolist.com
409. [1115]mailto:003301d21066$5739cc80$05ad6580$@telus.net
410. [1116]mailto:MikeLDrew at aol.com
411. [1117]mailto:julian_kift at hotmail.com
412. [1118]mailto:dnunn at telus.net
413. [1119]mailto:detomaso at server.detomasolist.com
414. [1120]mailto:julian_kift at hotmail.com
415. [1121]mailto:detomaso-bounces at server.detomasolist.com
416. [1122]mailto:detomaso at server.detomasolist.com
417. [1123]mailto:detomaso at server.detomasolist.com
418. [1124]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
419. [1125]mailto:dnunn at telus.net
420. [1126]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
421. [1127]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
422. [1128]mailto:DeTomaso at server.detomasolist.com
423. [1129]http://server.detomasolist.com/mailman/listinfo/detomaso
424. [1130]mailto:DeTomaso at server.detomasolist.com
425. [1131]http://server.detomasolist.com/mailman/listinfo/detomaso
426. [1132]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
427. [1133]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
428. [1134]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
429. [1135]http://server.detomasolist.com/mailman/listinfo/detomaso
430. [1136]http://server.detomasolist.com/mailman/listinfo/detomaso
431. [1137]mailto:DeTomaso at server.detomasolist.com
432. [1138]http://server.detomasolist.com/mailman/listinfo/detomaso
433. [1139]http://server.detomasolist.com/pipermail/detomaso/attachments/201
434. [1140]mailto:bill at incendium.com
435. [1141]mailto:red3644 at hotmail.com
436. [1142]mailto:detomaso at server.detomasolist.com
437. [1143]mailto:detomaso at server.detomasolist.com
438. [1144]mailto:asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com
439. [1145]mailto:red3644 at hotmail.com
440. [1146]mailto:detomaso at server.detomasolist.com
441. [1147]https://go.microsoft.com/fwlink/?LinkId=550986
442. [1148]https://go.microsoft.com/fwlink/?LinkId=550986
443. [1149]mailto:DeTomaso at server.detomasolist.com
444. [1150]http://server.detomasolist.com/mailman/listinfo/detomaso
445. [1151]mailto:red3644 at hotmail.com
446. [1152]mailto:detomaso at server.detomasolist.com
447. [1153]https://go.microsoft.com/fwlink/?LinkId=550986
448. [1154]https://go.microsoft.com/fwlink/?LinkId=550986
449. [1155]mailto:DeTomaso at server.detomasolist.com
450. [1156]http://server.detomasolist.com/mailman/listinfo/detomaso
451. [1157]mailto:bill at incendium.com
452. [1158]mailto:dnunn at telus.net
453. [1159]mailto:MikeLDrew at aol.com
454. [1160]mailto:julian_kift at hotmail.com
455. [1161]mailto:detomaso at server.detomasolist.com
456. [1162]mailto:twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com
457. [1163]mailto:dnunn at telus.net
458. [1164]mailto:MikeLDrew at aol.com
459. [1165]mailto:julian_kift at hotmail.com
460. [1166]mailto:detomaso at server.detomasolist.com
461. [1167]mailto:MikeLDrew at aol.com
462. [1168]mailto:julian_kift at hotmail.com
463. [1169]mailto:dnunn at telus.net
464. [1170]mailto:detomaso at server.detomasolist.com
465. [1171]mailto:julian_kift at hotmail.com
466. [1172]mailto:detomaso-bounces at server.detomasolist.com
467. [1173]mailto:detomaso at server.detomasolist.com
468. [1174]mailto:detomaso at server.detomasolist.com
469. [1175]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
470. [1176]mailto:dnunn at telus.net
471. [1177]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
472. [1178]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
473. [1179]mailto:DeTomaso at server.detomasolist.com
474. [1180]http://server.detomasolist.com/mailman/listinfo/detomaso
475. [1181]mailto:DeTomaso at server.detomasolist.com
476. [1182]http://server.detomasolist.com/mailman/listinfo/detomaso
477. [1183]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
478. [1184]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
479. [1185]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
480. [1186]http://server.detomasolist.com/mailman/listinfo/detomaso
481. [1187]http://server.detomasolist.com/mailman/listinfo/detomaso
482. [1188]mailto:DeTomaso at server.detomasolist.com
483. [1189]http://server.detomasolist.com/mailman/listinfo/detomaso
484. [1190]mailto:DeTomaso at server.detomasolist.com
485. [1191]http://server.detomasolist.com/mailman/listinfo/detomaso
486. [1192]mailto:dnunn at telus.net
487. [1193]mailto:MikeLDrew at aol.com
488. [1194]mailto:julian_kift at hotmail.com
489. [1195]mailto:detomaso at server.detomasolist.com
490. [1196]mailto:MikeLDrew at aol.com
491. [1197]mailto:julian_kift at hotmail.com
492. [1198]mailto:dnunn at telus.net
493. [1199]mailto:detomaso at server.detomasolist.com
494. [1200]mailto:julian_kift at hotmail.com
495. [1201]mailto:detomaso-bounces at server.detomasolist.com
496. [1202]mailto:detomaso at server.detomasolist.com
497. [1203]mailto:detomaso at server.detomasolist.com
498. [1204]cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
499. [1205]mailto:dnunn at telus.net
500. [1206]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
501. [1207]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
502. [1208]mailto:DeTomaso at server.detomasolist.com
503. [1209]http://server.detomasolist.com/mailman/listinfo/detomaso
504. [1210]mailto:DeTomaso at server.detomasolist.com
505. [1211]http://server.detomasolist.com/mailman/listinfo/detomaso
506. [1212]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
507. [1213]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
508. [1214]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
509. [1215]http://server.detomasolist.com/mailman/listinfo/detomaso
510. [1216]http://server.detomasolist.com/mailman/listinfo/detomaso
511. [1217]mailto:DeTomaso at server.detomasolist.com
512. [1218]http://server.detomasolist.com/mailman/listinfo/detomaso
513. [1219]mailto:DeTomaso at server.detomasolist.com
514. [1220]http://server.detomasolist.com/mailman/listinfo/detomaso
515. [1221]mailto:DeTomaso at server.detomasolist.com
516. [1222]http://server.detomasolist.com/mailman/listinfo/detomaso
517. [1223]mailto:DeTomaso at server.detomasolist.com
518. [1224]http://server.detomasolist.com/mailman/listinfo/detomaso
519. [1225]http://server.detomasolist.com/mailman/listinfo/detomaso
520. [1226]http://server.detomasolist.com/mailman/listinfo/detomaso
521. [1227]mailto:thimes at jpl.nasa.gov
522. [1228]http://server.detomasolist.com/mailman/listinfo/detomaso
523. [1229]mailto:thimes at jpl.nasa.gov
524. [1230]mailto:detomaso-bounces at server.detomasolist.com
525. [1231]mailto:demongusta at gmail.com
526. [1232]mailto:detomaso at server.detomasolist.com
527. [1233]mailto:detomaso at server.detomasolist.com
528. [1234]mailto:detomaso at server.detomasolist.com
529. [1235]mailto:detomaso at server.detomasolist.com
530. [1236]mailto:DeTomaso at server.detomasolist.com
531. [1237]http://server.detomasolist.com/mailman/listinfo/detomaso
532. [1238]http://server.detomasolist.com/mailman/listinfo/detomaso
533. [1239]http://centralwines.com/
534. [1240]http://facebook.com/CentralLiquors
535. [1241]mailto:DeTomaso at server.detomasolist.com
536. [1242]http://server.detomasolist.com/mailman/listinfo/detomaso
537. [1243]mailto:thimes at jpl.nasa.gov
538. [1244]mailto:detomaso-bounces at server.detomasolist.com
539. [1245]mailto:demongusta at gmail.com
540. [1246]mailto:detomaso at server.detomasolist.com
541. [1247]mailto:detomaso at server.detomasolist.com
542. [1248]mailto:detomaso at server.detomasolist.com
543. [1249]mailto:detomaso at server.detomasolist.com
544. [1250]mailto:DeTomaso at server.detomasolist.com
545. [1251]http://server.detomasolist.com/mailman/listinfo/detomaso
546. [1252]http://server.detomasolist.com/mailman/listinfo/detomaso
547. [1253]mailto:terry.himes at jpl.nasa.gov
548. [1254]mailto:thimes at jpl.nasa.gov
549. [1255]mailto:detomaso-bounces at server.detomasolist.com
550. [1256]mailto:demongusta at gmail.com
551. [1257]mailto:detomaso at server.detomasolist.com
552. [1258]mailto:detomaso at server.detomasolist.com
553. [1259]mailto:detomaso at server.detomasolist.com
554. [1260]mailto:detomaso at server.detomasolist.com
555. [1261]mailto:DeTomaso at server.detomasolist.com
556. [1262]http://server.detomasolist.com/mailman/listinfo/detomaso
557. [1263]http://server.detomasolist.com/mailman/listinfo/detomaso
558. [1264]http://www.PanteraParts.com/
559. [1265]http://server.detomasolist.com/mailman/listinfo/detomaso
560. [1266]https://www.summitracing.com/parts/mcl-1402-22
561. [1267]https://www.summitracing.com/parts/mcl-1402-22
562. [1268]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
ersal/primary-fans.html
563. [1269]http://server.detomasolist.com/mailman/listinfo/detomaso
564. [1270]https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
ersal/primary-fans.html
565. [1271]mailto:DeTomaso at server.detomasolist.com
566. [1272]http://server.detomasolist.com/mailman/listinfo/detomaso
567. [1273]http://centralwines.com/
568. [1274]http://facebook.com/CentralLiquors
569. [1275]mailto:DeTomaso at server.detomasolist.com
570. [1276]http://server.detomasolist.com/mailman/listinfo/detomaso
571. [1277]http://centralwines.com/
572. [1278]http://facebook.com/CentralLiquors
573. [1279]mailto:mycars at comcast.net
574. [1280]mailto:detomaso at server.detomasolist.com
575. [1281]mailto:DeTomaso at server.detomasolist.com
576. [1282]http://server.detomasolist.com/mailman/listinfo/detomaso
577. [1283]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.
html
578. [1284]http://centralwines.com/
579. [1285]http://facebook.com/CentralLiquors
580. [1286]mailto:mycars at comcast.net
581. [1287]mailto:detomaso at server.detomasolist.com
582. [1288]mailto:DeTomaso at server.detomasolist.com
583. [1289]http://server.detomasolist.com/mailman/listinfo/detomaso
584. [1290]http://server.detomasolist.com/mailman/listinfo/detomaso
585. [1291]http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.
html
586. [1292]mailto:mycars at comcast.net
587. [1293]mailto:4
588. [1294]mail[1295]mailto:mailto:4]detomaso at server.detomasolist.com
589. [1296]mailto:5
590. [1297]mail[1298]mailto:mailto:5]DeTomaso at server.detomasolist.com
591. [1299]http://server.detomasolist.com/mailman/listinfo/detomaso
592. [1300]http://centralwines.com/
593. [1301]http://facebook.com/CentralLiquors
594. [1302]mailto:mycars at comcast.net
595. [1303]mailto:detomaso at server.detomasolist.com
596. [1304]mailto:DeTomaso at server.detomasolist.com
597. [1305]http://server.detomasolist.com/mailman/listinfo/detomaso
598. [1306]mailto:DeTomaso at server.detomasolist.com
599. [1307]http://server.detomasolist.com/mailman/listinfo/detomaso
600. [1308]http://server.detomasolist.com/mailman/listinfo/detomaso
601. [1309]http://server.detomasolist.com/mailman/listinfo/detomaso
602. [1310]http://server.detomasolist.com/mailman/listinfo/detomaso
603. [1311]mailto:will.kooiman at gmail.com
604. [1312]mailto:detomaso at server.detomasolist.com
605. [1313]mailto:DeTomaso at server.detomasolist.com
606. [1314]http://server.detomasolist.com/mailman/listinfo/detomaso
607. [1315]mailto:DeTomaso at server.detomasolist.com
608. [1316]http://server.detomasolist.com/mailman/listinfo/detomaso
609. [1317]http://server.detomasolist.com/mailman/listinfo/detomaso
610. [1318]http://server.detomasolist.com/mailman/listinfo/detomaso
611. [1319]http://server.detomasolist.com/pipermail/detomaso/attachments/201609
16/33a69e52/attachment-0001.jpeg
612. [1320]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
613. [1321]http://server.detomasolist.com/mailman/listinfo/detomaso
614. [1322]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
615. [1323]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
616. [1324]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
617. [1325]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
618. [1326]http://www.ipsco.org/
619. [1327]http://server.detomasolist.com/mailman/listinfo/detomaso
620. [1328]http://server.detomasolist.com/mailman/listinfo/detomaso
621. [1329]http://www.ipsco.org/
622. [1330]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
623. [1331]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
624. [1332]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
625. [1333]http://server.detomasolist.com/mailman/listinfo/detomaso
626. [1334]http://server.detomasolist.com/mailman/listinfo/detomaso
627. [1335]http://server.detomasolist.com/pipermail/detomaso/attachments/201609
16/ed6ee2dd/attachment-0001.jpeg
628. [1336]http://www.ipsco.org/
629. [1337]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
630. [1338]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
631. [1339]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
632. [1340]http://server.detomasolist.com/mailman/listinfo/detomaso
633. [1341]http://server.detomasolist.com/mailman/listinfo/detomaso
634. [1342]http://server.detomasolist.com/mailman/listinfo/detomaso
635. [1343]http://server.detomasolist.com/mailman/listinfo/detomaso
636. [1344]http://server.detomasolist.com/mailman/listinfo/detomaso
637. [1345]http://server.detomasolist.com/mailman/listinfo/detomaso
638. [1346]http://server.detomasolist.com/mailman/listinfo/detomaso
639. [1347]http://server.detomasolist.com/mailman/listinfo/detomaso
640. [1348]mailto:larrys at panteraparts.com
641. [1349]mailto:detomaso-bounces at server.detomasolist.com
642. [1350]mailto:will.kooiman at gmail.com
643. [1351]mailto:detomaso at server.detomasolist.com
644. [1352]mailto:DeTomaso at server.detomasolist.com
645. [1353]http://server.detomasolist.com/mailman/listinfo/detomaso
646. [1354]mailto:DeTomaso at server.detomasolist.com
647. [1355]http://server.detomasolist.com/mailman/listinfo/detomaso
648. [1356]mailto:DeTomaso at server.detomasolist.com
649. [1357]http://server.detomasolist.com/mailman/listinfo/detomaso
650. [1358]https://go.microsoft.com/fwlink/?LinkId=550986
651. [1359]https://go.microsoft.com/fwlink/?LinkId=550986
652. [1360]mailto:MikeLDrew at aol.com
653. [1361]http://www.ipsco.org/
654. [1362]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
655. [1363]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
656. [1364]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
657. [1365]http://server.detomasolist.com/mailman/listinfo/detomaso
658. [1366]http://server.detomasolist.com/mailman/listinfo/detomaso
659. [1367]http://server.detomasolist.com/mailman/listinfo/detomaso
660. [1368]http://server.detomasolist.com/pipermail/detomaso/attachments/201609
16/e7e2256b/attachment-0001.jpg
661. [1369]https://go.microsoft.com/fwlink/?LinkId=550986
662. [1370]https://go.microsoft.com/fwlink/?LinkId=550986
663. [1371]http://server.detomasolist.com/mailman/listinfo/detomaso
664. [1372]https://go.microsoft.com/fwlink/?LinkId=550986
665. [1373]https://go.microsoft.com/fwlink/?LinkId=550986
666. [1374]http://server.detomasolist.com/mailman/listinfo/detomaso
667. [1375]mailto:MikeLDrew at aol.com
668. [1376]http://www.ipsco.org/
669. [1377]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
670. [1378]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
671. [1379]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
672. [1380]http://server.detomasolist.com/mailman/listinfo/detomaso
673. [1381]http://server.detomasolist.com/mailman/listinfo/detomaso
674. [1382]http://server.detomasolist.com/mailman/listinfo/detomaso
675. [1383]http://server.detomasolist.com/mailman/listinfo/detomaso
676. [1384]mailto:MikeLDrew at aol.com
677. [1385]http://www.ipsco.org/
678. [1386]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
679. [1387]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
680. [1388]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
681. [1389]http://server.detomasolist.com/mailman/listinfo/detomaso
682. [1390]http://server.detomasolist.com/mailman/listinfo/detomaso
683. [1391]http://server.detomasolist.com/mailman/listinfo/detomaso
684. [1392]http://server.detomasolist.com/mailman/listinfo/detomaso
685. [1393]http://server.detomasolist.com/mailman/listinfo/detomaso
686. [1394]http://server.detomasolist.com/mailman/listinfo/detomaso
687. [1395]mailto:DeTomaso at server.detomasolist.com
688. [1396]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1397]DeTomaso at server.detomasolist.com
[1398]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.
Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.
References
Visible links
1. mailto:detomaso-bounces at server.detomasolist.com
2. mailto:owen at tadhgcooke.com
3. mailto:3]detomaso at server.detomasolist.com
4. mailto:4]detomaso-request at server.detomasolist.com
5. mailto:5]detomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
7. mailto:7]detomaso-request at server.detomasolist.com
8. mailto:8]detomaso-owner at server.detomasolist.com
9. mailto:demongusta at gmail.com
10. mailto:detomaso at server.detomasolist.com
11. mailto:detomaso at server.detomasolist.com
12. mailto:detomaso at server.detomasolist.com
13. mailto:detomaso at server.detomasolist.com
14. mailto:CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com
15. mailto:terry.himes at jpl.nasa.gov
16. mailto:demongusta at gmail.com
17. mailto:detomaso at server.detomasolist.com
18. mailto:detomaso at server.detomasolist.com
19. mailto:D4016E9F.92F3B%thimes at jpl.nasa.gov
20. mailto:20]thimes at jpl.nasa.gov
21. mailto:thimes at jpl.nasa.gov
22. mailto:22]detomaso-bounces at server.detomasolist.com
23. mailto:detomaso-bounces at server.detomasolist.com
24. mailto:24]demongusta at gmail.com
25. mailto:demongusta at gmail.com
26. mailto:26]detomaso at server.detomasolist.com
27. mailto:detomaso at server.detomasolist.com
28. mailto:28]detomaso at server.detomasolist.com
29. mailto:detomaso at server.detomasolist.com
30. mailto:30]detomaso at server.detomasolist.com
31. mailto:detomaso at server.detomasolist.com
32. mailto:32]detomaso at server.detomasolist.com
33. mailto:detomaso at server.detomasolist.com
34. mailto:34]DeTomaso at server.detomasolist.com
35. mailto:DeTomaso at server.detomasolist.com
36. http://server.detomasolist.com/mailman/listinfo/detomaso
37. mailto:37]1]thimes at jpl.nasa.gov
38. mailto:[2]detomaso-bounces at server.detomasolist.com
39. mailto:[3]demongusta at gmail.com
40. mailto:[4]detomaso at server.detomasolist.com
41. mailto:[5]detomaso at server.detomasolist.com
42. mailto:[6]detomaso at server.detomasolist.com
43. mailto:[7]detomaso at server.detomasolist.com
44. mailto:44]8]DeTomaso at server.detomasolist.com
45. http://server.detomasolist.com/mailman/listinfo/detomaso
46. mailto:thimes at jpl.nasa.gov
47. mailto:detomaso-bounces at server.detomasolist.com
48. mailto:demongusta at gmail.com
49. mailto:detomaso at server.detomasolist.com
50. mailto:detomaso at server.detomasolist.com
51. mailto:detomaso at server.detomasolist.com
52. mailto:detomaso at server.detomasolist.com
53. mailto:DeTomaso at server.detomasolist.com
54. http://server.detomasolist.com/mailman/listinfo/detomaso
55. mailto:mycars at comcast.net
56. mailto:56]detomaso at server.detomasolist.com
57. mailto:6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net
58. mailto:lashdeep at yahoo.com
59. mailto:mycars at comcast.net
60. mailto:detomaso at server.detomasolist.com
61. mailto:detomaso at server.detomasolist.com
62. mailto:1287234121.1004140.1474045730621 at mail.yahoo.com
63. mailto:mycars at comcast.net
64. mailto:64]detomaso at server.detomasolist.com
65. mailto:65]DeTomaso at server.detomasolist.com
66. http://server.detomasolist.com/mailman/listinfo/detomaso
67. mailto:mycars at comcast.net
68. mailto:68]detomaso at server.detomasolist.com
69. mailto:69]3]DeTomaso at server.detomasolist.com
70. http://server.detomasolist.com/mailman/listinfo/detomaso
71. http://centralwines.com/
72. http://facebook.com/CentralLiquors
73. mailto:DeTomaso at server.detomasolist.com
74. http://server.detomasolist.com/mailman/listinfo/detomaso
75. mailto:demongusta at gmail.com
76. mailto:terry.himes at jpl.nasa.gov
77. mailto:detomaso at server.detomasolist.com
78. mailto:detomaso at server.detomasolist.com
79. mailto:09791B61-DE0D-40CC-859D-437A8528952A at gmail.com
80. mailto:terry.himes at jpl.nasa.gov
81. mailto:81]thimes at jpl.nasa.gov
82. mailto:thimes at jpl.nasa.gov
83. mailto:83]detomaso-bounces at server.detomasolist.com
84. mailto:detomaso-bounces at server.detomasolist.com
85. mailto:85]demongusta at gmail.com
86. mailto:demongusta at gmail.com
87. mailto:87]detomaso at server.detomasolist.com
88. mailto:detomaso at server.detomasolist.com
89. mailto:89]detomaso at server.detomasolist.com
90. mailto:detomaso at server.detomasolist.com
91. mailto:91]detomaso at server.detomasolist.com
92. mailto:detomaso at server.detomasolist.com
93. mailto:93]detomaso at server.detomasolist.com
94. mailto:detomaso at server.detomasolist.com
95. mailto:95]DeTomaso at server.detomasolist.com
96. mailto:DeTomaso at server.detomasolist.com
97. http://server.detomasolist.com/mailman/listinfo/detomaso
98. http://server.detomasolist.com/mailman/listinfo/detomaso
99. mailto:[1]terry.himes at jpl.nasa.gov
100. mailto:100]2]thimes at jpl.nasa.gov
101. mailto:[3]detomaso-bounces at server.detomasolist.com
102. mailto:[4]demongusta at gmail.com
103. mailto:[5]detomaso at server.detomasolist.com
104. mailto:[6]detomaso at server.detomasolist.com
105. mailto:[7]detomaso at server.detomasolist.com
106. mailto:[8]detomaso at server.detomasolist.com
107. mailto:107]9]DeTomaso at server.detomasolist.com
108. http://server.detomasolist.com/mailman/listinfo/detomaso
109. mailto:terry.himes at jpl.nasa.gov
110. mailto:thimes at jpl.nasa.gov
111. mailto:detomaso-bounces at server.detomasolist.com
112. mailto:demongusta at gmail.com
113. mailto:detomaso at server.detomasolist.com
114. mailto:detomaso at server.detomasolist.com
115. mailto:detomaso at server.detomasolist.com
116. mailto:detomaso at server.detomasolist.com
117. mailto:DeTomaso at server.detomasolist.com
118. http://server.detomasolist.com/mailman/listinfo/detomaso
119. mailto:demongusta at gmail.com
120. mailto:120]GR2835 at comcast.net
121. mailto:detomaso at server.detomasolist.com
122. mailto:detomaso at server.detomasolist.com
123. mailto:2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com
124. mailto:124]GR2835 at comcast.net
125. mailto:demongusta at gmail.com
126. mailto:126]detomaso at server.detomasolist.com
127. mailto:127]detomaso at server.detomasolist.com
128. mailto:128]DeTomaso at server.detomasolist.com
129. http://server.detomasolist.com/mailman/listinfo/detomaso
130. mailto:larrys at panteraparts.com
131. mailto:demongusta at gmail.com
132. mailto:detomaso at server.detomasolist.com
133. mailto:detomaso at server.detomasolist.com
134. mailto:D4018324.17A0EF%larrys at panteraparts.com
135. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
136. mailto:136]demongusta at gmail.com
137. mailto:137]DeTomaso at server.detomasolist.com
138. http://server.detomasolist.com/mailman/listinfo/detomaso
139. mailto:cmccann1972 at gmail.com
140. mailto:140]detomaso at server.detomasolist.com
141. mailto:CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail.com
142. https://www.summitracing.com/parts/mcl-1402-22
143. https://www.summitracing.com/parts/mcl-1402-22
144. https://www.summitracing.com/parts/mcl-1402-22
145. mailto:kenn_green at yahoo.com
146. mailto:demongusta at gmail.com
147. mailto:detomaso at server.detomasolist.com
148. mailto:detomaso at server.detomasolist.com
149. mailto:1796334072.2409059.1474054066544 at mail.yahoo.com
150. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
151. mailto:demongusta at gmail.com
152. mailto:detomaso at server.detomasolist.com
153. mailto:detomaso at server.detomasolist.com
154. mailto:detomaso at server.detomasolist.com
155. mailto:detomaso at server.detomasolist.com
156. mailto:156]DeTomaso at server.detomasolist.com
157. http://server.detomasolist.com/mailman/listinfo/detomaso
158. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
159. mailto:demongusta at gmail.com
160. mailto:detomaso at server.detomasolist.com
161. mailto:detomaso at server.detomasolist.com
162. mailto:detomaso at server.detomasolist.com
163. mailto:detomaso at server.detomasolist.com
164. mailto:164]2]DeTomaso at server.detomasolist.com
165. http://server.detomasolist.com/mailman/listinfo/detomaso
166. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
167. mailto:DeTomaso at server.detomasolist.com
168. http://server.detomasolist.com/mailman/listinfo/detomaso
169. mailto:fresnofinches at aol.com
170. mailto:detomaso at server.detomasolist.com
171. mailto:6C366701-6502-47C0-A0DC-59494515D156 at aol.com
172. mailto:mycars at comcast.net
173. mailto:lashdeep at yahoo.com
174. mailto:detomaso at server.detomasolist.com
175. mailto:detomaso at server.detomasolist.com
176. mailto:37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net
177. http://centralwines.com/
178. http://facebook.com/CentralLiquors
179. mailto:mycars at comcast.net
180. mailto:180]detomaso at server.detomasolist.com
181. mailto:181]DeTomaso at server.detomasolist.com
182. mailto:DeTomaso at server.detomasolist.com
183. http://server.detomasolist.com/mailman/listinfo/detomaso
184. mailto:mycars at comcast.net
185. mailto:185]4]detomaso at server.detomasolist.com
186. mailto:186]5]DeTomaso at server.detomasolist.com
187. http://server.detomasolist.com/mailman/listinfo/detomaso
188. http://centralwines.com/
189. http://facebook.com/CentralLiquors
190. mailto:mycars at comcast.net
191. mailto:detomaso at server.detomasolist.com
192. mailto:DeTomaso at server.detomasolist.com
193. http://server.detomasolist.com/mailman/listinfo/detomaso
194. mailto:mycars at comcast.net
195. mailto:195]detomaso at server.detomasolist.com
196. mailto:013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net
197. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
198. mailto:mycars at comcast.net
199. mailto:199]4]detomaso at server.detomasolist.com
200. mailto:200]5]DeTomaso at server.detomasolist.com
201. http://server.detomasolist.com/mailman/listinfo/detomaso
202. http://centralwines.com/
203. http://facebook.com/CentralLiquors
204. mailto:mycars at comcast.net
205. mailto:detomaso at server.detomasolist.com
206. mailto:DeTomaso at server.detomasolist.com
207. http://server.detomasolist.com/mailman/listinfo/detomaso
208. mailto:208]DeTomaso at server.detomasolist.com
209. http://server.detomasolist.com/mailman/listinfo/detomaso
210. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
211. mailto:mycars at comcast.net
212. mailto:212]3]4]detomaso at server.detomasolist.com
213. mailto:213]4]5]DeTomaso at server.detomasolist.com
214. http://server.detomasolist.com/mailman/listinfo/detomaso
215. http://centralwines.com/
216. http://facebook.com/CentralLiquors
217. mailto:mycars at comcast.net
218. mailto:detomaso at server.detomasolist.com
219. mailto:DeTomaso at server.detomasolist.com
220. http://server.detomasolist.com/mailman/listinfo/detomaso
221. mailto:221]12]DeTomaso at server.detomasolist.com
222. http://server.detomasolist.com/mailman/listinfo/detomaso
223. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
224. mailto:mycars at comcast.net
225. mailto:226]69]mailto:4]detomaso at server.detomasolist.com
226. mailto:228]70]mailto:5]DeTomaso at server.detomasolist.com
227. http://server.detomasolist.com/mailman/listinfo/detomaso
228. http://centralwines.com/
229. http://facebook.com/CentralLiquors
230. mailto:mycars at comcast.net
231. mailto:detomaso at server.detomasolist.com
232. mailto:DeTomaso at server.detomasolist.com
233. http://server.detomasolist.com/mailman/listinfo/detomaso
234. mailto:DeTomaso at server.detomasolist.com
235. http://server.detomasolist.com/mailman/listinfo/detomaso
236. mailto:will.kooiman at gmail.com
237. mailto:fresnofinches at aol.com
238. mailto:detomaso at server.detomasolist.com
239. mailto:D401CD29.16A666%will.kooiman at gmail.com
240. mailto:detomaso at server.detomasolist.com
241. mailto:243]DeTomaso at server.detomasolist.com
242. http://server.detomasolist.com/mailman/listinfo/detomaso
243. mailto:cmccann1972 at gmail.com
244. mailto:will.kooiman at gmail.com
245. mailto:detomaso at server.detomasolist.com
246. mailto:fresnofinches at aol.com
247. mailto:CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail.com
248. mailto:will.kooiman at gmail.com
249. mailto:detomaso at server.detomasolist.com
250. mailto:252]DeTomaso at server.detomasolist.com
251. http://server.detomasolist.com/mailman/listinfo/detomaso
252. mailto:254]DeTomaso at server.detomasolist.com
253. http://server.detomasolist.com/mailman/listinfo/detomaso
254. mailto:[1]will.kooiman at gmail.com
255. mailto:[2]detomaso at server.detomasolist.com
256. mailto:258]3]DeTomaso at server.detomasolist.com
257. http://server.detomasolist.com/mailman/listinfo/detomaso
258. mailto:260]5]DeTomaso at server.detomasolist.com
259. http://server.detomasolist.com/mailman/listinfo/detomaso
260. mailto:will.kooiman at gmail.com
261. mailto:detomaso at server.detomasolist.com
262. mailto:DeTomaso at server.detomasolist.com
263. http://server.detomasolist.com/mailman/listinfo/detomaso
264. mailto:DeTomaso at server.detomasolist.com
265. http://server.detomasolist.com/mailman/listinfo/detomaso
266. mailto:larrys at panteraparts.com
267. mailto:will.kooiman at gmail.com
268. mailto:fresnofinches at aol.com
269. mailto:detomaso at server.detomasolist.com
270. mailto:D401A883.17A144%larrys at panteraparts.com
271. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
272. mailto:274]will.kooiman at gmail.com
273. mailto:detomaso at server.detomasolist.com
274. mailto:276]DeTomaso at server.detomasolist.com
275. http://server.detomasolist.com/mailman/listinfo/detomaso
276. mailto:278]DeTomaso at server.detomasolist.com
277. http://server.detomasolist.com/mailman/listinfo/detomaso
278. mailto:MikeLDrew at aol.com
279. mailto:dnunn at telus.net
280. mailto:detomaso at server.detomasolist.com
281. mailto:detomaso at server.detomasolist.com
282. mailto:C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com
283. http://server.detomasolist.com/pipermail/detomaso/attachments/2016
284. mailto:dnunn at telus.net
285. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
286. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
287. mailto:289]DeTomaso at server.detomasolist.com
288. http://server.detomasolist.com/mailman/listinfo/detomaso
289. mailto:julian_kift at hotmail.com
290. mailto:dnunn at telus.net
291. mailto:MikeLDrew at aol.com
292. mailto:detomaso at server.detomasolist.com
293. mailto:detomaso at server.detomasolist.com
294. mailto:CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.prod.outlook.com
295. mailto:detomaso-bounces at server.detomasolist.com
296. mailto:detomaso at server.detomasolist.com
297. mailto:detomaso at server.detomasolist.com
298. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
299. mailto:dnunn at telus.net
300. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
301. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
302. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
303. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
304. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
305. mailto:307]DeTomaso at server.detomasolist.com
306. http://server.detomasolist.com/mailman/listinfo/detomaso
307. mailto:309]DeTomaso at server.detomasolist.com
308. http://server.detomasolist.com/mailman/listinfo/detomaso
309. mailto:detomaso-bounces at server.detomasolist.com
310. mailto:detomaso at server.detomasolist.com
311. mailto:detomaso at server.detomasolist.com
312. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
313. mailto:dnunn at telus.net
314. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
315. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
316. mailto:318]DeTomaso at server.detomasolist.com
317. http://server.detomasolist.com/mailman/listinfo/detomaso
318. mailto:320]DeTomaso at server.detomasolist.com
319. http://server.detomasolist.com/mailman/listinfo/detomaso
320. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
321. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
322. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
323. http://server.detomasolist.com/mailman/listinfo/detomaso
324. http://server.detomasolist.com/mailman/listinfo/detomaso
325. http://server.detomasolist.com/pipermail/detomaso/attachments/201
326. mailto:MikeLDrew at aol.com
327. mailto:julian_kift at hotmail.com
328. mailto:dnunn at telus.net
329. mailto:detomaso at server.detomasolist.com
330. mailto:detomaso at server.detomasolist.com
331. mailto:7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com
332. mailto:julian_kift at hotmail.com
333. mailto:detomaso-bounces at server.detomasolist.com
334. mailto:detomaso at server.detomasolist.com
335. mailto:detomaso at server.detomasolist.com
336. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
337. mailto:dnunn at telus.net
338. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
339. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
340. mailto:342]DeTomaso at server.detomasolist.com
341. http://server.detomasolist.com/mailman/listinfo/detomaso
342. mailto:344]DeTomaso at server.detomasolist.com
343. http://server.detomasolist.com/mailman/listinfo/detomaso
344. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
345. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
346. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
347. http://server.detomasolist.com/mailman/listinfo/detomaso
348. http://server.detomasolist.com/mailman/listinfo/detomaso
349. mailto:351]DeTomaso at server.detomasolist.com
350. http://server.detomasolist.com/mailman/listinfo/detomaso
351. mailto:fresnofinches at aol.com
352. mailto:detomaso at server.detomasolist.com
353. mailto:78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com
354. mailto:larrys at panteraparts.com
355. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
356. mailto:358]will.kooiman at gmail.com
357. mailto:detomaso at server.detomasolist.com
358. mailto:360]DeTomaso at server.detomasolist.com
359. http://server.detomasolist.com/mailman/listinfo/detomaso
360. mailto:362]DeTomaso at server.detomasolist.com
361. http://server.detomasolist.com/mailman/listinfo/detomaso
362. mailto:cmccann1972 at gmail.com
363. mailto:larrys at panteraparts.com
364. mailto:detomaso at server.detomasolist.com
365. mailto:fresnofinches at aol.com
366. mailto:CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmail.com
367. mailto:larrys at panteraparts.com
368. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
369. mailto:371]will.kooiman at gmail.com
370. mailto:detomaso at server.detomasolist.com
371. mailto:373]DeTomaso at server.detomasolist.com
372. http://server.detomasolist.com/mailman/listinfo/detomaso
373. mailto:375]DeTomaso at server.detomasolist.com
374. http://server.detomasolist.com/mailman/listinfo/detomaso
375. mailto:377]DeTomaso at server.detomasolist.com
376. http://server.detomasolist.com/mailman/listinfo/detomaso
377. mailto:[1]larrys at panteraparts.com
378. mailto:[2]detomaso-bounces at server.detomasolist.comonbehalfof
379. mailto:381]3]will.kooiman at gmail.com
380. mailto:[4]detomaso at server.detomasolist.com
381. mailto:383]5]DeTomaso at server.detomasolist.com
382. http://server.detomasolist.com/mailman/listinfo/detomaso
383. mailto:385]7]DeTomaso at server.detomasolist.com
384. http://server.detomasolist.com/mailman/listinfo/detomaso
385. mailto:387]9]DeTomaso at server.detomasolist.com
386. http://server.detomasolist.com/mailman/listinfo/detomaso
387. mailto:larrys at panteraparts.com
388. mailto:detomaso-bounces at server.detomasolist.com
389. mailto:will.kooiman at gmail.com
390. mailto:detomaso at server.detomasolist.com
391. mailto:DeTomaso at server.detomasolist.com
392. http://server.detomasolist.com/mailman/listinfo/detomaso
393. mailto:DeTomaso at server.detomasolist.com
394. http://server.detomasolist.com/mailman/listinfo/detomaso
395. mailto:DeTomaso at server.detomasolist.com
396. http://server.detomasolist.com/mailman/listinfo/detomaso
397. mailto:red3644 at hotmail.com
398. mailto:detomaso at server.detomasolist.com
399. mailto:detomaso at server.detomasolist.com
400. mailto:SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07.prod.outlook.com
401. https://go.microsoft.com/fwlink/?LinkId=550986
402. https://go.microsoft.com/fwlink/?LinkId=550986
403. mailto:dnunn at telus.net
404. mailto:MikeLDrew at aol.com
405. mailto:julian_kift at hotmail.com
406. mailto:408]detomaso at server.detomasolist.com
407. mailto:003301d21066$5739cc80$05ad6580$@telus.net
408. mailto:MikeLDrew at aol.com
409. mailto:julian_kift at hotmail.com
410. mailto:dnunn at telus.net
411. mailto:413]detomaso at server.detomasolist.co
412. mailto:julian_kift at hotmail.com
413. mailto:detomaso-bounces at server.detomasolist.com
414. mailto:detomaso at server.detomasolist.com
415. mailto:detomaso at server.detomasolist.com
416. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
417. mailto:dnunn at telus.net
418. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
419. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
420. mailto:422]DeTomaso at server.detomasolist.com
421. http://server.detomasolist.com/mailman/listinfo/detomaso
422. mailto:424]DeTomaso at server.detomasolist.com
423. http://server.detomasolist.com/mailman/listinfo/detomaso
424. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
425. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
426. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
427. http://server.detomasolist.com/mailman/listinfo/detomaso
428. http://server.detomasolist.com/mailman/listinfo/detomaso
429. mailto:431]DeTomaso at server.detomasolist.com
430. http://server.detomasolist.com/mailman/listinfo/detomaso
431. http://server.detomasolist.com/pipermail/detomaso/attachments/201
432. mailto:bill at incendium.com
433. mailto:red3644 at hotmail.com
434. mailto:detomaso at server.detomasolist.com
435. mailto:detomaso at server.detomasolist.com
436. mailto:asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com
437. mailto:red3644 at hotmail.com
438. mailto:440]detomaso at server.detomasolist.com
439. https://go.microsoft.com/fwlink/?LinkId=550986
440. https://go.microsoft.com/fwlink/?LinkId=550986
441. mailto:443]DeTomaso at server.detomasolist.com
442. http://server.detomasolist.com/mailman/listinfo/detomaso
443. mailto:red3644 at hotmail.com
444. mailto:446]detomaso at server.detomasolist.com
445. https://go.microsoft.com/fwlink/?LinkId=550986
446. https://go.microsoft.com/fwlink/?LinkId=550986
447. mailto:449]DeTomaso at server.detomasolist.com
448. http://server.detomasolist.com/mailman/listinfo/detomaso
449. mailto:bill at incendium.com
450. mailto:dnunn at telus.net
451. mailto:MikeLDrew at aol.com
452. mailto:julian_kift at hotmail.com
453. mailto:455]detomaso at server.detomasolist.com
454. mailto:twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com
455. mailto:dnunn at telus.net
456. mailto:MikeLDrew at aol.com
457. mailto:julian_kift at hotmail.com
458. mailto:460]detomaso at server.detomasolist.com
459. mailto:MikeLDrew at aol.com
460. mailto:julian_kift at hotmail.com
461. mailto:dnunn at telus.net
462. mailto:464]detomaso at server.detomasolist.co
463. mailto:julian_kift at hotmail.com
464. mailto:detomaso-bounces at server.detomasolist.com
465. mailto:detomaso at server.detomasolist.com
466. mailto:detomaso at server.detomasolist.com
467. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
468. mailto:dnunn at telus.net
469. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
470. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
471. mailto:473]DeTomaso at server.detomasolist.com
472. http://server.detomasolist.com/mailman/listinfo/detomaso
473. mailto:475]DeTomaso at server.detomasolist.com
474. http://server.detomasolist.com/mailman/listinfo/detomaso
475. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
476. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
477. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
478. http://server.detomasolist.com/mailman/listinfo/detomaso
479. http://server.detomasolist.com/mailman/listinfo/detomaso
480. mailto:482]DeTomaso at server.detomasolist.com
481. http://server.detomasolist.com/mailman/listinfo/detomaso
482. mailto:484]DeTomaso at server.detomasolist.com
483. http://server.detomasolist.com/mailman/listinfo/detomaso
484. mailto:dnunn at telus.net
485. mailto:MikeLDrew at aol.com
486. mailto:julian_kift at hotmail.com
487. mailto:489]detomaso at server.detomasolist.com
488. mailto:MikeLDrew at aol.com
489. mailto:julian_kift at hotmail.com
490. mailto:dnunn at telus.net
491. mailto:493]detomaso at server.detomasolist.com
492. mailto:julian_kift at hotmail.com
493. mailto:detomaso-bounces at server.detomasolist.com
494. mailto:detomaso at server.detomasolist.com
495. mailto:detomaso at server.detomasolist.com
496. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
497. mailto:dnunn at telus.net
498. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
499. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
500. mailto:502]DeTomaso at server.detomasolist.com
501. http://server.detomasolist.com/mailman/listinfo/detomaso
502. mailto:504]DeTomaso at server.detomasolist.com
503. http://server.detomasolist.com/mailman/listinfo/detomaso
504. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
505. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
506. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
507. http://server.detomasolist.com/mailman/listinfo/detomaso
508. http://server.detomasolist.com/mailman/listinfo/detomaso
509. mailto:511]DeTomaso at server.detomasolist.com
510. http://server.detomasolist.com/mailman/listinfo/detomaso
511. mailto:513]DeTomaso at server.detomasolist.com
512. http://server.detomasolist.com/mailman/listinfo/detomaso
513. mailto:515]DeTomaso at server.detomasolist.com
514. http://server.detomasolist.com/mailman/listinfo/detomaso
515. mailto:517]DeTomaso at server.detomasolist.com
516. http://server.detomasolist.com/mailman/listinfo/detomaso
517. http://server.detomasolist.com/mailman/listinfo/detomaso
518. http://server.detomasolist.com/mailman/listinfo/detomaso
519. mailto:thimes at jpl.nasa.gov
520. http://server.detomasolist.com/mailman/listinfo/detomaso
521. mailto:thimes at jpl.nasa.gov
522. mailto:detomaso-bounces at server.detomasolist.com
523. mailto:demongusta at gmail.com
524. mailto:detomaso at server.detomasolist.com
525. mailto:detomaso at server.detomasolist.com
526. mailto:detomaso at server.detomasolist.com
527. mailto:detomaso at server.detomasolist.com
528. mailto:DeTomaso at server.detomasolist.com
529. http://server.detomasolist.com/mailman/listinfo/detomaso
530. http://server.detomasolist.com/mailman/listinfo/detomaso
531. http://centralwines.com/
532. http://facebook.com/CentralLiquors
533. mailto:DeTomaso at server.detomasolist.com
534. http://server.detomasolist.com/mailman/listinfo/detomaso
535. mailto:thimes at jpl.nasa.gov
536. mailto:detomaso-bounces at server.detomasolist.com
537. mailto:demongusta at gmail.com
538. mailto:detomaso at server.detomasolist.com
539. mailto:detomaso at server.detomasolist.com
540. mailto:detomaso at server.detomasolist.com
541. mailto:detomaso at server.detomasolist.com
542. mailto:DeTomaso at server.detomasolist.com
543. http://server.detomasolist.com/mailman/listinfo/detomaso
544. http://server.detomasolist.com/mailman/listinfo/detomaso
545. mailto:terry.himes at jpl.nasa.gov
546. mailto:thimes at jpl.nasa.gov
547. mailto:detomaso-bounces at server.detomasolist.com
548. mailto:demongusta at gmail.com
549. mailto:detomaso at server.detomasolist.com
550. mailto:detomaso at server.detomasolist.com
551. mailto:detomaso at server.detomasolist.com
552. mailto:detomaso at server.detomasolist.com
553. mailto:DeTomaso at server.detomasolist.com
554. http://server.detomasolist.com/mailman/listinfo/detomaso
555. http://server.detomasolist.com/mailman/listinfo/detomaso
556. http://www.PanteraParts.com/
557. http://server.detomasolist.com/mailman/listinfo/detomaso
558. https://www.summitracing.com/parts/mcl-1402-22
559. https://www.summitracing.com/parts/mcl-1402-22
560. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/unive
561. http://server.detomasolist.com/mailman/listinfo/detomaso
562. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/unive
563. mailto:DeTomaso at server.detomasolist.com
564. http://server.detomasolist.com/mailman/listinfo/detomaso
565. http://centralwines.com/
566. http://facebook.com/CentralLiquors
567. mailto:DeTomaso at server.detomasolist.com
568. http://server.detomasolist.com/mailman/listinfo/detomaso
569. http://centralwines.com/
570. http://facebook.com/CentralLiquors
571. mailto:mycars at comcast.net
572. mailto:detomaso at server.detomasolist.com
573. mailto:DeTomaso at server.detomasolist.com
574. http://server.detomasolist.com/mailman/listinfo/detomaso
575. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.h
576. http://centralwines.com/
577. http://facebook.com/CentralLiquors
578. mailto:mycars at comcast.net
579. mailto:detomaso at server.detomasolist.com
580. mailto:DeTomaso at server.detomasolist.com
581. http://server.detomasolist.com/mailman/listinfo/detomaso
582. http://server.detomasolist.com/mailman/listinfo/detomaso
583. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.h
584. mailto:mycars at comcast.net
585. mailto:588]mailto:4]detomaso at server.detomasolist.com
586. mailto:590]mailto:5]DeTomaso at server.detomasolist.com
587. http://server.detomasolist.com/mailman/listinfo/detomaso
588. http://centralwines.com/
589. http://facebook.com/CentralLiquors
590. mailto:mycars at comcast.net
591. mailto:detomaso at server.detomasolist.com
592. mailto:DeTomaso at server.detomasolist.com
593. http://server.detomasolist.com/mailman/listinfo/detomaso
594. mailto:DeTomaso at server.detomasolist.com
595. http://server.detomasolist.com/mailman/listinfo/detomaso
596. http://server.detomasolist.com/mailman/listinfo/detomaso
597. http://server.detomasolist.com/mailman/listinfo/detomaso
598. http://server.detomasolist.com/mailman/listinfo/detomaso
599. mailto:will.kooiman at gmail.com
600. mailto:detomaso at server.detomasolist.com
601. mailto:DeTomaso at server.detomasolist.com
602. http://server.detomasolist.com/mailman/listinfo/detomaso
603. mailto:DeTomaso at server.detomasolist.com
604. http://server.detomasolist.com/mailman/listinfo/detomaso
605. http://server.detomasolist.com/mailman/listinfo/detomaso
606. http://server.detomasolist.com/mailman/listinfo/detomaso
607. http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
608. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
609. http://server.detomasolist.com/mailman/listinfo/detomaso
610. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
611. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
612. http:///
613. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
614. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
615. http://www.ipsco.org/
616. http://server.detomasolist.com/mailman/listinfo/detomaso
617. http://server.detomasolist.com/mailman/listinfo/detomaso
618. http://www.ipsco.org/
619. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
620. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
621. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
622. http://server.detomasolist.com/mailman/listinfo/detomaso
623. http://server.detomasolist.com/mailman/listinfo/detomaso
624. http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
625. http://www.ipsco.org/
626. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
627. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
628. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
629. http://server.detomasolist.com/mailman/listinfo/detomaso
630. http://server.detomasolist.com/mailman/listinfo/detomaso
631. http://server.detomasolist.com/mailman/listinfo/detomaso
632. http://server.detomasolist.com/mailman/listinfo/detomaso
633. http://server.detomasolist.com/mailman/listinfo/detomaso
634. http://server.detomasolist.com/mailman/listinfo/detomaso
635. http://server.detomasolist.com/mailman/listinfo/detomaso
636. http://server.detomasolist.com/mailman/listinfo/detomaso
637. mailto:larrys at panteraparts.com
638. mailto:detomaso-bounces at server.detomasolist.com
639. mailto:will.kooiman at gmail.com
640. mailto:detomaso at server.detomasolist.com
641. mailto:DeTomaso at server.detomasolist.com
642. http://server.detomasolist.com/mailman/listinfo/detomaso
643. mailto:DeTomaso at server.detomasolist.com
644. http://server.detomasolist.com/mailman/listinfo/detomaso
645. mailto:DeTomaso at server.detomasolist.com
646. http://server.detomasolist.com/mailman/listinfo/detomaso
647. https://go.microsoft.com/fwlink/?LinkId=550986
648. https://go.microsoft.com/fwlink/?LinkId=550986
649. mailto:MikeLDrew at aol.com
650. http://www.ipsco.org/
651. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
652. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
653. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
654. http://server.detomasolist.com/mailman/listinfo/detomaso
655. http://server.detomasolist.com/mailman/listinfo/detomaso
656. http://server.detomasolist.com/mailman/listinfo/detomaso
657. http://server.detomasolist.com/pipermail/detomaso/attachments/2016091
658. https://go.microsoft.com/fwlink/?LinkId=550986
659. https://go.microsoft.com/fwlink/?LinkId=550986
660. http://server.detomasolist.com/mailman/listinfo/detomaso
661. https://go.microsoft.com/fwlink/?LinkId=550986
662. https://go.microsoft.com/fwlink/?LinkId=550986
663. http://server.detomasolist.com/mailman/listinfo/detomaso
664. mailto:MikeLDrew at aol.com
665. http://www.ipsco.org/
666. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
667. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
668. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
669. http://server.detomasolist.com/mailman/listinfo/detomaso
670. http://server.detomasolist.com/mailman/listinfo/detomaso
671. http://server.detomasolist.com/mailman/listinfo/detomaso
672. http://server.detomasolist.com/mailman/listinfo/detomaso
673. mailto:MikeLDrew at aol.com
674. http://www.ipsco.org/
675. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
676. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
677. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
678. http://server.detomasolist.com/mailman/listinfo/detomaso
679. http://server.detomasolist.com/mailman/listinfo/detomaso
680. http://server.detomasolist.com/mailman/listinfo/detomaso
681. http://server.detomasolist.com/mailman/listinfo/detomaso
682. http://server.detomasolist.com/mailman/listinfo/detomaso
683. http://server.detomasolist.com/mailman/listinfo/detomaso
684. mailto:687]DeTomaso at server.detomasolist.com
685. http://server.detomasolist.com/mailman/listinfo/detomaso
686. mailto:detomaso-bounces at server.detomasolist.com
687. mailto:owen at tadhgcooke.com
688. mailto:detomaso at server.detomasolist.com
689. mailto:detomaso-request at server.detomasolist.com
690. mailto:detomaso at server.detomasolist.com
691. http://server.detomasolist.com/mailman/listinfo/detomaso
692. mailto:detomaso-request at server.detomasolist.com
693. mailto:detomaso-owner at server.detomasolist.com
694. mailto:demongusta at gmail.com
695. mailto:detomaso at server.detomasolist.com
696. mailto:detomaso at server.detomasolist.com
697. mailto:detomaso at server.detomasolist.com
698. mailto:detomaso at server.detomasolist.com
699. mailto:CF682A66-9CF9-422E-AD65-2D23A9ABE4BC at gmail.com
700. mailto:terry.himes at jpl.nasa.gov
701. mailto:demongusta at gmail.com
702. mailto:detomaso at server.detomasolist.com
703. mailto:detomaso at server.detomasolist.com
704. mailto:D4016E9F.92F3B%thimes at jpl.nasa.gov
705. mailto:thimes at jpl.nasa.gov
706. mailto:thimes at jpl.nasa.gov
707. mailto:detomaso-bounces at server.detomasolist.com
708. mailto:detomaso-bounces at server.detomasolist.com
709. mailto:demongusta at gmail.com
710. mailto:demongusta at gmail.com
711. mailto:detomaso at server.detomasolist.com
712. mailto:detomaso at server.detomasolist.com
713. mailto:detomaso at server.detomasolist.com
714. mailto:detomaso at server.detomasolist.com
715. mailto:detomaso at server.detomasolist.com
716. mailto:detomaso at server.detomasolist.com
717. mailto:detomaso at server.detomasolist.com
718. mailto:detomaso at server.detomasolist.com
719. mailto:DeTomaso at server.detomasolist.com
720. mailto:DeTomaso at server.detomasolist.com
721. http://server.detomasolist.com/mailman/listinfo/detomaso
722. mailto:1
723. mailto:mailto:1]thimes at jpl.nasa.gov
724. mailto:2]detomaso-bounces at server.detomasolist.com
725. mailto:3]demongusta at gmail.com
726. mailto:4]detomaso at server.detomasolist.com
727. mailto:5]detomaso at server.detomasolist.com
728. mailto:6]detomaso at server.detomasolist.com
729. mailto:7]detomaso at server.detomasolist.com
730. mailto:8
731. mailto:mailto:8]DeTomaso at server.detomasolist.com
732. http://server.detomasolist.com/mailman/listinfo/detomaso
733. mailto:thimes at jpl.nasa.gov
734. mailto:detomaso-bounces at server.detomasolist.com
735. mailto:demongusta at gmail.com
736. mailto:detomaso at server.detomasolist.com
737. mailto:detomaso at server.detomasolist.com
738. mailto:detomaso at server.detomasolist.com
739. mailto:detomaso at server.detomasolist.com
740. mailto:DeTomaso at server.detomasolist.com
741. http://server.detomasolist.com/mailman/listinfo/detomaso
742. mailto:mycars at comcast.net
743. mailto:detomaso at server.detomasolist.com
744. mailto:6fa00360-0d5e-3618-1132-2455f7b0aca2 at comcast.net
745. mailto:lashdeep at yahoo.com
746. mailto:mycars at comcast.net
747. mailto:detomaso at server.detomasolist.com
748. mailto:detomaso at server.detomasolist.com
749. mailto:1287234121.1004140.1474045730621 at mail.yahoo.com
750. mailto:mycars at comcast.net
751. mailto:detomaso at server.detomasolist.com
752. mailto:DeTomaso at server.detomasolist.com
753. http://server.detomasolist.com/mailman/listinfo/detomaso
754. mailto:mycars at comcast.net
755. mailto:detomaso at server.detomasolist.com
756. mailto:3
757. mailto:mailto:3]DeTomaso at server.detomasolist.com
758. http://server.detomasolist.com/mailman/listinfo/detomaso
759. http://centralwines.com/
760. http://facebook.com/CentralLiquors
761. mailto:DeTomaso at server.detomasolist.com
762. http://server.detomasolist.com/mailman/listinfo/detomaso
763. mailto:demongusta at gmail.com
764. mailto:terry.himes at jpl.nasa.gov
765. mailto:detomaso at server.detomasolist.com
766. mailto:detomaso at server.detomasolist.com
767. mailto:09791B61-DE0D-40CC-859D-437A8528952A at gmail.com
768. mailto:terry.himes at jpl.nasa.gov
769. mailto:thimes at jpl.nasa.gov
770. mailto:thimes at jpl.nasa.gov
771. mailto:detomaso-bounces at server.detomasolist.com
772. mailto:detomaso-bounces at server.detomasolist.com
773. mailto:demongusta at gmail.com
774. mailto:demongusta at gmail.com
775. mailto:detomaso at server.detomasolist.com
776. mailto:detomaso at server.detomasolist.com
777. mailto:detomaso at server.detomasolist.com
778. mailto:detomaso at server.detomasolist.com
779. mailto:detomaso at server.detomasolist.com
780. mailto:detomaso at server.detomasolist.com
781. mailto:detomaso at server.detomasolist.com
782. mailto:detomaso at server.detomasolist.com
783. mailto:DeTomaso at server.detomasolist.com
784. mailto:DeTomaso at server.detomasolist.com
785. http://server.detomasolist.com/mailman/listinfo/detomaso
786. http://server.detomasolist.com/mailman/listinfo/detomaso
787. mailto:1]terry.himes at jpl.nasa.gov
788. mailto:2
789. mailto:mailto:2]thimes at jpl.nasa.gov
790. mailto:3]detomaso-bounces at server.detomasolist.com
791. mailto:4]demongusta at gmail.com
792. mailto:5]detomaso at server.detomasolist.com
793. mailto:6]detomaso at server.detomasolist.com
794. mailto:7]detomaso at server.detomasolist.com
795. mailto:8]detomaso at server.detomasolist.com
796. mailto:9
797. mailto:mailto:9]DeTomaso at server.detomasolist.com
798. http://server.detomasolist.com/mailman/listinfo/detomaso
799. mailto:terry.himes at jpl.nasa.gov
800. mailto:thimes at jpl.nasa.gov
801. mailto:detomaso-bounces at server.detomasolist.com
802. mailto:demongusta at gmail.com
803. mailto:detomaso at server.detomasolist.com
804. mailto:detomaso at server.detomasolist.com
805. mailto:detomaso at server.detomasolist.com
806. mailto:detomaso at server.detomasolist.com
807. mailto:DeTomaso at server.detomasolist.com
808. http://server.detomasolist.com/mailman/listinfo/detomaso
809. mailto:demongusta at gmail.com
810. mailto:GR2835 at comcast.net
811. mailto:detomaso at server.detomasolist.com
812. mailto:detomaso at server.detomasolist.com
813. mailto:2334BABE-726C-4D16-85EA-BB997B2B61CB at gmail.com
814. mailto:GR2835 at comcast.net
815. mailto:demongusta at gmail.com
816. mailto:detomaso at server.detomasolist.com
817. mailto:detomaso at server.detomasolist.com
818. mailto:DeTomaso at server.detomasolist.com
819. http://server.detomasolist.com/mailman/listinfo/detomaso
820. mailto:larrys at panteraparts.com
821. mailto:demongusta at gmail.com
822. mailto:detomaso at server.detomasolist.com
823. mailto:detomaso at server.detomasolist.com
824. mailto:D4018324.17A0EF%larrys at panteraparts.com
825. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
826. mailto:demongusta at gmail.com
827. mailto:DeTomaso at server.detomasolist.com
828. http://server.detomasolist.com/mailman/listinfo/detomaso
829. mailto:cmccann1972 at gmail.com
830. mailto:detomaso at server.detomasolist.com
831. mailto:CAFwr-MXfE-RBLar+qAHGPYYWnwSszwYufvAcAcUT2ngvZZ1Aqg at mail.gmail.com
832. https://www.summitracing.com/parts/mcl-1402-22
833. https://www.summitracing.com/parts/mcl-1402-22
834. https://www.summitracing.com/parts/mcl-1402-22
835. mailto:kenn_green at yahoo.com
836. mailto:demongusta at gmail.com
837. mailto:detomaso at server.detomasolist.com
838. mailto:detomaso at server.detomasolist.com
839. mailto:1796334072.2409059.1474054066544 at mail.yahoo.com
840. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
841. mailto:demongusta at gmail.com
842. mailto:detomaso at server.detomasolist.com
843. mailto:detomaso at server.detomasolist.com
844. mailto:detomaso at server.detomasolist.com
845. mailto:detomaso at server.detomasolist.com
846. mailto:DeTomaso at server.detomasolist.com
847. http://server.detomasolist.com/mailman/listinfo/detomaso
848. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/univ
849. mailto:demongusta at gmail.com
850. mailto:detomaso at server.detomasolist.com
851. mailto:detomaso at server.detomasolist.com
852. mailto:detomaso at server.detomasolist.com
853. mailto:detomaso at server.detomasolist.com
854. mailto:2
855. mailto:mailto:2]DeTomaso at server.detomasolist.com
856. http://server.detomasolist.com/mailman/listinfo/detomaso
857. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/uni
858. mailto:DeTomaso at server.detomasolist.com
859. http://server.detomasolist.com/mailman/listinfo/detomaso
860. mailto:fresnofinches at aol.com
861. mailto:detomaso at server.detomasolist.com
862. mailto:6C366701-6502-47C0-A0DC-59494515D156 at aol.com
863. mailto:mycars at comcast.net
864. mailto:lashdeep at yahoo.com
865. mailto:detomaso at server.detomasolist.com
866. mailto:detomaso at server.detomasolist.com
867. mailto:37e8f14d-dde9-3ce5-f312-4dd9b1c3f234 at comcast.net
868. http://centralwines.com/
869. http://facebook.com/CentralLiquors
870. mailto:mycars at comcast.net
871. mailto:detomaso at server.detomasolist.com
872. mailto:DeTomaso at server.detomasolist.com
873. mailto:DeTomaso at server.detomasolist.com
874. http://server.detomasolist.com/mailman/listinfo/detomaso
875. mailto:mycars at comcast.net
876. mailto:4
877. mailto:mailto:4]detomaso at server.detomasolist.com
878. mailto:5
879. mailto:mailto:5]DeTomaso at server.detomasolist.com
880. http://server.detomasolist.com/mailman/listinfo/detomaso
881. http://centralwines.com/
882. http://facebook.com/CentralLiquors
883. mailto:mycars at comcast.net
884. mailto:detomaso at server.detomasolist.com
885. mailto:DeTomaso at server.detomasolist.com
886. http://server.detomasolist.com/mailman/listinfo/detomaso
887. mailto:mycars at comcast.net
888. mailto:detomaso at server.detomasolist.com
889. mailto:013ad905-7f93-99e8-761f-878f602ee6cb at comcast.net
890. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
891. mailto:mycars at comcast.net
892. mailto:4
893. mailto:mailto:4]detomaso at server.detomasolist.com
894. mailto:5
895. mailto:mailto:5]DeTomaso at server.detomasolist.com
896. http://server.detomasolist.com/mailman/listinfo/detomaso
897. http://centralwines.com/
898. http://facebook.com/CentralLiquors
899. mailto:mycars at comcast.net
900. mailto:detomaso at server.detomasolist.com
901. mailto:DeTomaso at server.detomasolist.com
902. http://server.detomasolist.com/mailman/listinfo/detomaso
903. mailto:DeTomaso at server.detomasolist.com
904. http://server.detomasolist.com/mailman/listinfo/detomaso
905. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
906. mailto:mycars at comcast.net
907. mailto:3
908. mailto:mailto:3]4]detomaso at server.detomasolist.com
909. mailto:4
910. mailto:mailto:4]5]DeTomaso at server.detomasolist.com
911. http://server.detomasolist.com/mailman/listinfo/detomaso
912. http://centralwines.com/
913. http://facebook.com/CentralLiquors
914. mailto:mycars at comcast.net
915. mailto:detomaso at server.detomasolist.com
916. mailto:DeTomaso at server.detomasolist.com
917. http://server.detomasolist.com/mailman/listinfo/detomaso
918. mailto:12
919. mailto:mailto:12]DeTomaso at server.detomasolist.com
920. http://server.detomasolist.com/mailman/listinfo/detomaso
921. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar
922. mailto:mycars at comcast.net
923. mailto:4
924. mailto:69
925. mailto:mailto:69]mailto:4]detomaso at server.detomasolist.com
926. mailto:5
927. mailto:70
928. mailto:mailto:70]mailto:5]DeTomaso at server.detomasolist.com
929. http://server.detomasolist.com/mailman/listinfo/detomaso
930. http://centralwines.com/
931. http://facebook.com/CentralLiquors
932. mailto:mycars at comcast.net
933. mailto:detomaso at server.detomasolist.com
934. mailto:DeTomaso at server.detomasolist.com
935. http://server.detomasolist.com/mailman/listinfo/detomaso
936. mailto:DeTomaso at server.detomasolist.com
937. http://server.detomasolist.com/mailman/listinfo/detomaso
938. mailto:will.kooiman at gmail.com
939. mailto:fresnofinches at aol.com
940. mailto:detomaso at server.detomasolist.com
941. mailto:D401CD29.16A666%will.kooiman at gmail.com
942. mailto:detomaso at server.detomasolist.com
943. mailto:DeTomaso at server.detomasolist.com
944. http://server.detomasolist.com/mailman/listinfo/detomaso
945. mailto:cmccann1972 at gmail.com
946. mailto:will.kooiman at gmail.com
947. mailto:detomaso at server.detomasolist.com
948. mailto:fresnofinches at aol.com
949. mailto:CAFwr-MXS50CCAQsJNmavjATb-j1RSZxcQrYF3EOYwY-xD=9Jpg at mail.gmail.com
950. mailto:will.kooiman at gmail.com
951. mailto:detomaso at server.detomasolist.com
952. mailto:DeTomaso at server.detomasolist.com
953. http://server.detomasolist.com/mailman/listinfo/detomaso
954. mailto:DeTomaso at server.detomasolist.com
955. http://server.detomasolist.com/mailman/listinfo/detomaso
956. mailto:1]will.kooiman at gmail.com
957. mailto:2]detomaso at server.detomasolist.com
958. mailto:3
959. mailto:mailto:3]DeTomaso at server.detomasolist.com
960. http://server.detomasolist.com/mailman/listinfo/detomaso
961. mailto:5
962. mailto:mailto:5]DeTomaso at server.detomasolist.com
963. http://server.detomasolist.com/mailman/listinfo/detomaso
964. mailto:will.kooiman at gmail.com
965. mailto:detomaso at server.detomasolist.com
966. mailto:DeTomaso at server.detomasolist.com
967. http://server.detomasolist.com/mailman/listinfo/detomaso
968. mailto:DeTomaso at server.detomasolist.com
969. http://server.detomasolist.com/mailman/listinfo/detomaso
970. mailto:larrys at panteraparts.com
971. mailto:will.kooiman at gmail.com
972. mailto:fresnofinches at aol.com
973. mailto:detomaso at server.detomasolist.com
974. mailto:D401A883.17A144%larrys at panteraparts.com
975. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
976. mailto:will.kooiman at gmail.com
977. mailto:detomaso at server.detomasolist.com
978. mailto:DeTomaso at server.detomasolist.com
979. http://server.detomasolist.com/mailman/listinfo/detomaso
980. mailto:DeTomaso at server.detomasolist.com
981. http://server.detomasolist.com/mailman/listinfo/detomaso
982. mailto:MikeLDrew at aol.com
983. mailto:dnunn at telus.net
984. mailto:detomaso at server.detomasolist.com
985. mailto:detomaso at server.detomasolist.com
986. mailto:C4C5C3CB-D201-4825-A845-85208C7B8B62 at aol.com
987. http://server.detomasolist.com/pipermail/detomaso/attachments/2016
988. mailto:dnunn at telus.net
989. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
990. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
991. mailto:DeTomaso at server.detomasolist.com
992. http://server.detomasolist.com/mailman/listinfo/detomaso
993. mailto:julian_kift at hotmail.com
994. mailto:dnunn at telus.net
995. mailto:MikeLDrew at aol.com
996. mailto:detomaso at server.detomasolist.com
997. mailto:detomaso at server.detomasolist.com
998. mailto:CY4PR18MB12865ADBFE3EEDECFFB644A895F30 at CY4PR18MB1286.namprd18.prod.outlook.com
999. mailto:detomaso-bounces at server.detomasolist.com
1000. mailto:detomaso at server.detomasolist.com
1001. mailto:detomaso at server.detomasolist.com
1002. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1003. mailto:dnunn at telus.net
1004. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1005. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1006. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
1007. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1008. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1009. mailto:DeTomaso at server.detomasolist.com
1010. http://server.detomasolist.com/mailman/listinfo/detomaso
1011. mailto:DeTomaso at server.detomasolist.com
1012. http://server.detomasolist.com/mailman/listinfo/detomaso
1013. mailto:detomaso-bounces at server.detomasolist.com
1014. mailto:detomaso at server.detomasolist.com
1015. mailto:detomaso at server.detomasolist.com
1016. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1017. mailto:dnunn at telus.net
1018. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1019. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1020. mailto:DeTomaso at server.detomasolist.com
1021. http://server.detomasolist.com/mailman/listinfo/detomaso
1022. mailto:DeTomaso at server.detomasolist.com
1023. http://server.detomasolist.com/mailman/listinfo/detomaso
1024. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1025. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1026. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1027. http://server.detomasolist.com/mailman/listinfo/detomaso
1028. http://server.detomasolist.com/mailman/listinfo/detomaso
1029. http://server.detomasolist.com/pipermail/detomaso/attachments/201
1030. mailto:MikeLDrew at aol.com
1031. mailto:julian_kift at hotmail.com
1032. mailto:dnunn at telus.net
1033. mailto:detomaso at server.detomasolist.com
1034. mailto:detomaso at server.detomasolist.com
1035. mailto:7B7EDC5D-6016-45F7-B580-31A839921366 at aol.com
1036. mailto:julian_kift at hotmail.com
1037. mailto:detomaso-bounces at server.detomasolist.com
1038. mailto:detomaso at server.detomasolist.com
1039. mailto:detomaso at server.detomasolist.com
1040. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1041. mailto:dnunn at telus.net
1042. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1043. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1044. mailto:DeTomaso at server.detomasolist.com
1045. http://server.detomasolist.com/mailman/listinfo/detomaso
1046. mailto:DeTomaso at server.detomasolist.com
1047. http://server.detomasolist.com/mailman/listinfo/detomaso
1048. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1049. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1050. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1051. http://server.detomasolist.com/mailman/listinfo/detomaso
1052. http://server.detomasolist.com/mailman/listinfo/detomaso
1053. mailto:DeTomaso at server.detomasolist.com
1054. http://server.detomasolist.com/mailman/listinfo/detomaso
1055. mailto:fresnofinches at aol.com
1056. mailto:detomaso at server.detomasolist.com
1057. mailto:78A89D59-A850-402B-8862-ABC7DFF75CD9 at aol.com
1058. mailto:larrys at panteraparts.com
1059. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
1060. mailto:will.kooiman at gmail.com
1061. mailto:detomaso at server.detomasolist.com
1062. mailto:DeTomaso at server.detomasolist.com
1063. http://server.detomasolist.com/mailman/listinfo/detomaso
1064. mailto:DeTomaso at server.detomasolist.com
1065. http://server.detomasolist.com/mailman/listinfo/detomaso
1066. mailto:cmccann1972 at gmail.com
1067. mailto:larrys at panteraparts.com
1068. mailto:detomaso at server.detomasolist.com
1069. mailto:fresnofinches at aol.com
1070. mailto:CAFwr-MWHHeaX0ok7ajqCPFCdY9WbHzjGrnmoMoMYuHjYFCj-cA at mail.gmail.com
1071. mailto:larrys at panteraparts.com
1072. mailto:detomaso-bounces at server.detomasolist.comonbehalfof
1073. mailto:will.kooiman at gmail.com
1074. mailto:detomaso at server.detomasolist.com
1075. mailto:DeTomaso at server.detomasolist.com
1076. http://server.detomasolist.com/mailman/listinfo/detomaso
1077. mailto:DeTomaso at server.detomasolist.com
1078. http://server.detomasolist.com/mailman/listinfo/detomaso
1079. mailto:DeTomaso at server.detomasolist.com
1080. http://server.detomasolist.com/mailman/listinfo/detomaso
1081. mailto:1]larrys at panteraparts.com
1082. mailto:2]detomaso-bounces at server.detomasolist.comonbehalfof
1083. mailto:3
1084. mailto:mailto:3]will.kooiman at gmail.com
1085. mailto:4]detomaso at server.detomasolist.com
1086. mailto:5
1087. mailto:mailto:5]DeTomaso at server.detomasolist.com
1088. http://server.detomasolist.com/mailman/listinfo/detomaso
1089. mailto:7
1090. mailto:mailto:7]DeTomaso at server.detomasolist.com
1091. http://server.detomasolist.com/mailman/listinfo/detomaso
1092. mailto:9
1093. mailto:mailto:9]DeTomaso at server.detomasolist.com
1094. http://server.detomasolist.com/mailman/listinfo/detomaso
1095. mailto:larrys at panteraparts.com
1096. mailto:detomaso-bounces at server.detomasolist.com
1097. mailto:will.kooiman at gmail.com
1098. mailto:detomaso at server.detomasolist.com
1099. mailto:DeTomaso at server.detomasolist.com
1100. http://server.detomasolist.com/mailman/listinfo/detomaso
1101. mailto:DeTomaso at server.detomasolist.com
1102. http://server.detomasolist.com/mailman/listinfo/detomaso
1103. mailto:DeTomaso at server.detomasolist.com
1104. http://server.detomasolist.com/mailman/listinfo/detomaso
1105. mailto:red3644 at hotmail.com
1106. mailto:detomaso at server.detomasolist.com
1107. mailto:detomaso at server.detomasolist.com
1108. mailto:SN1PR07MB2254F82A006D414EA80223FCB9F30 at SN1PR07MB2254.namprd07.prod.outlook.com
1109. https://go.microsoft.com/fwlink/?LinkId=550986
1110. https://go.microsoft.com/fwlink/?LinkId=550986
1111. mailto:dnunn at telus.net
1112. mailto:MikeLDrew at aol.com
1113. mailto:julian_kift at hotmail.com
1114. mailto:detomaso at server.detomasolist.com
1115. mailto:003301d21066$5739cc80$05ad6580$@telus.net
1116. mailto:MikeLDrew at aol.com
1117. mailto:julian_kift at hotmail.com
1118. mailto:dnunn at telus.net
1119. mailto:detomaso at server.detomasolist.com
1120. mailto:julian_kift at hotmail.com
1121. mailto:detomaso-bounces at server.detomasolist.com
1122. mailto:detomaso at server.detomasolist.com
1123. mailto:detomaso at server.detomasolist.com
1124. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1125. mailto:dnunn at telus.net
1126. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1127. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1128. mailto:DeTomaso at server.detomasolist.com
1129. http://server.detomasolist.com/mailman/listinfo/detomaso
1130. mailto:DeTomaso at server.detomasolist.com
1131. http://server.detomasolist.com/mailman/listinfo/detomaso
1132. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1133. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1134. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1135. http://server.detomasolist.com/mailman/listinfo/detomaso
1136. http://server.detomasolist.com/mailman/listinfo/detomaso
1137. mailto:DeTomaso at server.detomasolist.com
1138. http://server.detomasolist.com/mailman/listinfo/detomaso
1139. http://server.detomasolist.com/pipermail/detomaso/attachments/201
1140. mailto:bill at incendium.com
1141. mailto:red3644 at hotmail.com
1142. mailto:detomaso at server.detomasolist.com
1143. mailto:detomaso at server.detomasolist.com
1144. mailto:asutxkibtwmp20w9x9fxrayp.1474064813467 at email.android.com
1145. mailto:red3644 at hotmail.com
1146. mailto:detomaso at server.detomasolist.com
1147. https://go.microsoft.com/fwlink/?LinkId=550986
1148. https://go.microsoft.com/fwlink/?LinkId=550986
1149. mailto:DeTomaso at server.detomasolist.com
1150. http://server.detomasolist.com/mailman/listinfo/detomaso
1151. mailto:red3644 at hotmail.com
1152. mailto:detomaso at server.detomasolist.com
1153. https://go.microsoft.com/fwlink/?LinkId=550986
1154. https://go.microsoft.com/fwlink/?LinkId=550986
1155. mailto:DeTomaso at server.detomasolist.com
1156. http://server.detomasolist.com/mailman/listinfo/detomaso
1157. mailto:bill at incendium.com
1158. mailto:dnunn at telus.net
1159. mailto:MikeLDrew at aol.com
1160. mailto:julian_kift at hotmail.com
1161. mailto:detomaso at server.detomasolist.com
1162. mailto:twbfe1jjjap5dl76l23cu2gv.1474065106843 at email.android.com
1163. mailto:dnunn at telus.net
1164. mailto:MikeLDrew at aol.com
1165. mailto:julian_kift at hotmail.com
1166. mailto:detomaso at server.detomasolist.com
1167. mailto:MikeLDrew at aol.com
1168. mailto:julian_kift at hotmail.com
1169. mailto:dnunn at telus.net
1170. mailto:detomaso at server.detomasolist.com
1171. mailto:julian_kift at hotmail.com
1172. mailto:detomaso-bounces at server.detomasolist.com
1173. mailto:detomaso at server.detomasolist.com
1174. mailto:detomaso at server.detomasolist.com
1175. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1176. mailto:dnunn at telus.net
1177. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1178. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1179. mailto:DeTomaso at server.detomasolist.com
1180. http://server.detomasolist.com/mailman/listinfo/detomaso
1181. mailto:DeTomaso at server.detomasolist.com
1182. http://server.detomasolist.com/mailman/listinfo/detomaso
1183. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1184. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1185. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1186. http://server.detomasolist.com/mailman/listinfo/detomaso
1187. http://server.detomasolist.com/mailman/listinfo/detomaso
1188. mailto:DeTomaso at server.detomasolist.com
1189. http://server.detomasolist.com/mailman/listinfo/detomaso
1190. mailto:DeTomaso at server.detomasolist.com
1191. http://server.detomasolist.com/mailman/listinfo/detomaso
1192. mailto:dnunn at telus.net
1193. mailto:MikeLDrew at aol.com
1194. mailto:julian_kift at hotmail.com
1195. mailto:detomaso at server.detomasolist.com
1196. mailto:MikeLDrew at aol.com
1197. mailto:julian_kift at hotmail.com
1198. mailto:dnunn at telus.net
1199. mailto:detomaso at server.detomasolist.com
1200. mailto:julian_kift at hotmail.com
1201. mailto:detomaso-bounces at server.detomasolist.com
1202. mailto:detomaso at server.detomasolist.com
1203. mailto:detomaso at server.detomasolist.com
1204. cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f at namprd18.prod.outlook.com
1205. mailto:dnunn at telus.net
1206. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1207. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1208. mailto:DeTomaso at server.detomasolist.com
1209. http://server.detomasolist.com/mailman/listinfo/detomaso
1210. mailto:DeTomaso at server.detomasolist.com
1211. http://server.detomasolist.com/mailman/listinfo/detomaso
1212. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1213. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1214. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1215. http://server.detomasolist.com/mailman/listinfo/detomaso
1216. http://server.detomasolist.com/mailman/listinfo/detomaso
1217. mailto:DeTomaso at server.detomasolist.com
1218. http://server.detomasolist.com/mailman/listinfo/detomaso
1219. mailto:DeTomaso at server.detomasolist.com
1220. http://server.detomasolist.com/mailman/listinfo/detomaso
1221. mailto:DeTomaso at server.detomasolist.com
1222. http://server.detomasolist.com/mailman/listinfo/detomaso
1223. mailto:DeTomaso at server.detomasolist.com
1224. http://server.detomasolist.com/mailman/listinfo/detomaso
1225. http://server.detomasolist.com/mailman/listinfo/detomaso
1226. http://server.detomasolist.com/mailman/listinfo/detomaso
1227. mailto:thimes at jpl.nasa.gov
1228. http://server.detomasolist.com/mailman/listinfo/detomaso
1229. mailto:thimes at jpl.nasa.gov
1230. mailto:detomaso-bounces at server.detomasolist.com
1231. mailto:demongusta at gmail.com
1232. mailto:detomaso at server.detomasolist.com
1233. mailto:detomaso at server.detomasolist.com
1234. mailto:detomaso at server.detomasolist.com
1235. mailto:detomaso at server.detomasolist.com
1236. mailto:DeTomaso at server.detomasolist.com
1237. http://server.detomasolist.com/mailman/listinfo/detomaso
1238. http://server.detomasolist.com/mailman/listinfo/detomaso
1239. http://centralwines.com/
1240. http://facebook.com/CentralLiquors
1241. mailto:DeTomaso at server.detomasolist.com
1242. http://server.detomasolist.com/mailman/listinfo/detomaso
1243. mailto:thimes at jpl.nasa.gov
1244. mailto:detomaso-bounces at server.detomasolist.com
1245. mailto:demongusta at gmail.com
1246. mailto:detomaso at server.detomasolist.com
1247. mailto:detomaso at server.detomasolist.com
1248. mailto:detomaso at server.detomasolist.com
1249. mailto:detomaso at server.detomasolist.com
1250. mailto:DeTomaso at server.detomasolist.com
1251. http://server.detomasolist.com/mailman/listinfo/detomaso
1252. http://server.detomasolist.com/mailman/listinfo/detomaso
1253. mailto:terry.himes at jpl.nasa.gov
1254. mailto:thimes at jpl.nasa.gov
1255. mailto:detomaso-bounces at server.detomasolist.com
1256. mailto:demongusta at gmail.com
1257. mailto:detomaso at server.detomasolist.com
1258. mailto:detomaso at server.detomasolist.com
1259. mailto:detomaso at server.detomasolist.com
1260. mailto:detomaso at server.detomasolist.com
1261. mailto:DeTomaso at server.detomasolist.com
1262. http://server.detomasolist.com/mailman/listinfo/detomaso
1263. http://server.detomasolist.com/mailman/listinfo/detomaso
1264. http://www.PanteraParts.com/
1265. http://server.detomasolist.com/mailman/listinfo/detomaso
1266. https://www.summitracing.com/parts/mcl-1402-22
1267. https://www.summitracing.com/parts/mcl-1402-22
1268. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/universal/primary-fans.html
1269. http://server.detomasolist.com/mailman/listinfo/detomaso
1270. https://www.flex-a-lite.com/electric-fans/12-volt-electric-fans/universal/primary-fans.html
1271. mailto:DeTomaso at server.detomasolist.com
1272. http://server.detomasolist.com/mailman/listinfo/detomaso
1273. http://centralwines.com/
1274. http://facebook.com/CentralLiquors
1275. mailto:DeTomaso at server.detomasolist.com
1276. http://server.detomasolist.com/mailman/listinfo/detomaso
1277. http://centralwines.com/
1278. http://facebook.com/CentralLiquors
1279. mailto:mycars at comcast.net
1280. mailto:detomaso at server.detomasolist.com
1281. mailto:DeTomaso at server.detomasolist.com
1282. http://server.detomasolist.com/mailman/listinfo/detomaso
1283. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.html
1284. http://centralwines.com/
1285. http://facebook.com/CentralLiquors
1286. mailto:mycars at comcast.net
1287. mailto:detomaso at server.detomasolist.com
1288. mailto:DeTomaso at server.detomasolist.com
1289. http://server.detomasolist.com/mailman/listinfo/detomaso
1290. http://server.detomasolist.com/mailman/listinfo/detomaso
1291. http://weldwheels.com/shop/street-strip/sport-forged-wheels/prostar.html
1292. mailto:mycars at comcast.net
1293. mailto:4
1294. mailto:mailto:4
1295. mailto:mailto:mailto:4]detomaso at server.detomasolist.com
1296. mailto:5
1297. mailto:mailto:5
1298. mailto:mailto:mailto:5]DeTomaso at server.detomasolist.com
1299. http://server.detomasolist.com/mailman/listinfo/detomaso
1300. http://centralwines.com/
1301. http://facebook.com/CentralLiquors
1302. mailto:mycars at comcast.net
1303. mailto:detomaso at server.detomasolist.com
1304. mailto:DeTomaso at server.detomasolist.com
1305. http://server.detomasolist.com/mailman/listinfo/detomaso
1306. mailto:DeTomaso at server.detomasolist.com
1307. http://server.detomasolist.com/mailman/listinfo/detomaso
1308. http://server.detomasolist.com/mailman/listinfo/detomaso
1309. http://server.detomasolist.com/mailman/listinfo/detomaso
1310. http://server.detomasolist.com/mailman/listinfo/detomaso
1311. mailto:will.kooiman at gmail.com
1312. mailto:detomaso at server.detomasolist.com
1313. mailto:DeTomaso at server.detomasolist.com
1314. http://server.detomasolist.com/mailman/listinfo/detomaso
1315. mailto:DeTomaso at server.detomasolist.com
1316. http://server.detomasolist.com/mailman/listinfo/detomaso
1317. http://server.detomasolist.com/mailman/listinfo/detomaso
1318. http://server.detomasolist.com/mailman/listinfo/detomaso
1319. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/33a69e52/attachment-0001.jpeg
1320. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1321. http://server.detomasolist.com/mailman/listinfo/detomaso
1322. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1323. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.jpg
1324. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1325. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1326. http://www.ipsco.org/
1327. http://server.detomasolist.com/mailman/listinfo/detomaso
1328. http://server.detomasolist.com/mailman/listinfo/detomaso
1329. http://www.ipsco.org/
1330. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1331. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1332. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1333. http://server.detomasolist.com/mailman/listinfo/detomaso
1334. http://server.detomasolist.com/mailman/listinfo/detomaso
1335. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/ed6ee2dd/attachment-0001.jpeg
1336. http://www.ipsco.org/
1337. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1338. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1339. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1340. http://server.detomasolist.com/mailman/listinfo/detomaso
1341. http://server.detomasolist.com/mailman/listinfo/detomaso
1342. http://server.detomasolist.com/mailman/listinfo/detomaso
1343. http://server.detomasolist.com/mailman/listinfo/detomaso
1344. http://server.detomasolist.com/mailman/listinfo/detomaso
1345. http://server.detomasolist.com/mailman/listinfo/detomaso
1346. http://server.detomasolist.com/mailman/listinfo/detomaso
1347. http://server.detomasolist.com/mailman/listinfo/detomaso
1348. mailto:larrys at panteraparts.com
1349. mailto:detomaso-bounces at server.detomasolist.com
1350. mailto:will.kooiman at gmail.com
1351. mailto:detomaso at server.detomasolist.com
1352. mailto:DeTomaso at server.detomasolist.com
1353. http://server.detomasolist.com/mailman/listinfo/detomaso
1354. mailto:DeTomaso at server.detomasolist.com
1355. http://server.detomasolist.com/mailman/listinfo/detomaso
1356. mailto:DeTomaso at server.detomasolist.com
1357. http://server.detomasolist.com/mailman/listinfo/detomaso
1358. https://go.microsoft.com/fwlink/?LinkId=550986
1359. https://go.microsoft.com/fwlink/?LinkId=550986
1360. mailto:MikeLDrew at aol.com
1361. http://www.ipsco.org/
1362. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1363. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1364. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1365. http://server.detomasolist.com/mailman/listinfo/detomaso
1366. http://server.detomasolist.com/mailman/listinfo/detomaso
1367. http://server.detomasolist.com/mailman/listinfo/detomaso
1368. http://server.detomasolist.com/pipermail/detomaso/attachments/20160916/e7e2256b/attachment-0001.jpg
1369. https://go.microsoft.com/fwlink/?LinkId=550986
1370. https://go.microsoft.com/fwlink/?LinkId=550986
1371. http://server.detomasolist.com/mailman/listinfo/detomaso
1372. https://go.microsoft.com/fwlink/?LinkId=550986
1373. https://go.microsoft.com/fwlink/?LinkId=550986
1374. http://server.detomasolist.com/mailman/listinfo/detomaso
1375. mailto:MikeLDrew at aol.com
1376. http://www.ipsco.org/
1377. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1378. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1379. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1380. http://server.detomasolist.com/mailman/listinfo/detomaso
1381. http://server.detomasolist.com/mailman/listinfo/detomaso
1382. http://server.detomasolist.com/mailman/listinfo/detomaso
1383. http://server.detomasolist.com/mailman/listinfo/detomaso
1384. mailto:MikeLDrew at aol.com
1385. http://www.ipsco.org/
1386. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1387. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1388. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
1389. http://server.detomasolist.com/mailman/listinfo/detomaso
1390. http://server.detomasolist.com/mailman/listinfo/detomaso
1391. http://server.detomasolist.com/mailman/listinfo/detomaso
1392. http://server.detomasolist.com/mailman/listinfo/detomaso
1393. http://server.detomasolist.com/mailman/listinfo/detomaso
1394. http://server.detomasolist.com/mailman/listinfo/detomaso
1395. mailto:DeTomaso at server.detomasolist.com
1396. http://server.detomasolist.com/mailman/listinfo/detomaso
1397. mailto:DeTomaso at server.detomasolist.com
1398. http://server.detomasolist.com/mailman/listinfo/detomaso
Hidden links:
1400. mailto:4
1401. mailto:5
More information about the DeTomaso
mailing list