[DeTomaso] new radiator and fans????
Ken Green
kenn_green at yahoo.com
Mon Mar 7 18:59:29 EST 2016
You might want to look at John Taphorn's cooling design. It is not a trivial change, but appears to be the current thinking:
http://www.spacecitypanteras.com/Technical/Pantera_Cooling-JTaphorn.pdf
From: Larry Finch via DeTomaso <detomaso at poca.com>
To: DeTomaso Forum <detomaso at poca.com>
Sent: Monday, March 7, 2016 2:56 PM
Subject: [DeTomaso] new radiator and fans????
All,
I am starting from scratch on a cooling system for 2511.
I have no fans and no radiator. That leaves all options on the table. In the scheme of things, all choices will be about the same money, so I have no real financial constraints.
I had a Quella/Ron Davis triple-pass and Hall’s Mirriah pusher fans. The combo worked fine.
Hood has no vents and I will not be adding them.
I currently have a rear-mounted AC condenser and do not intend to move it to a forward position.
I will likely lay the new radiator down a little bit to allow my Kirk Evans fiberglass upper shroud to be installed. That project got put on the back burner due to interference with the taller aftermarket Quella radiator.
I am leaning towards a shrouded sucker fan layout. Something akin to Jack DeRyke’s version, where he added a 1” spacer strip to move the fans further from the radiator core, instead of right next to the core.
Aluminum or brass are both on the table.
I am asking for the Family’s collective wisdom:
Knowing what you know, with no limitations, what would your choices be?
Thanks,
Larry
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
You might want to look at John Taphorn's cooling design. It is not a
trivial change, but appears to be the current thinking:
[1]http://www.spacecitypanteras.com/Technical/Pantera_Cooling-JTaphorn.
pdf
__________________________________________________________________
From: Larry Finch via DeTomaso <detomaso at poca.com>
To: DeTomaso Forum <detomaso at poca.com>
Sent: Monday, March 7, 2016 2:56 PM
Subject: [DeTomaso] new radiator and fans????
All,
I am starting from scratch on a cooling system for 2511.
I have no fans and no radiator. That leaves all options on the table.
In the scheme of things, all choices will be about the same money, so I
have no real financial constraints.
I had a Quella/Ron Davis triple-pass and Hallas Mirriah pusher fans.
The combo worked fine.
Hood has no vents and I will not be adding them.
I currently have a rear-mounted AC condenser and do not intend to move
it to a forward position.
I will likely lay the new radiator down a little bit to allow my Kirk
Evans fiberglass upper shroud to be installed. That project got put on
the back burner due to interference with the taller aftermarket Quella
radiator.
I am leaning towards a shrouded sucker fan layout. Something akin to
Jack DeRykeas version, where he added a 1a spacer strip to move the
fans further from the radiator core, instead of right next to the core.
Aluminum or brass are both on the table.
I am asking for the Familyas collective wisdom:
Knowing what you know, with no limitations, what would your choices be?
Thanks,
Larry
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at poca.com
[3]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. http://www.spacecitypanteras.com/Technical/Pantera_Cooling-JTaphorn.pdf
2. mailto:DeTomaso at poca.com
3. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list