[DeTomaso] Clutch Line Flaring
Ken Green
kenn_green at yahoo.com
Wed Jun 10 00:06:35 EDT 2015
I bought a Brakequip kit that has both flares:
http://www.brakequip.com/shop/high-speed-flaring-tool-kit-professional-bq350
They had a deal at the SEMA show if you are not in a hurry.
From: Mike Thomas <mbefthomas at comcast.net>
To: detomaso at poca.com
Sent: Tuesday, June 9, 2015 5:39 PM
Subject: [DeTomaso] Clutch Line Flaring
I need to cut the line to my clutch master to install a nut to meet the end
of the fitting on one of the CNC clutch masters. Can someone who has one of
these tell me if the ends of the connector are 45 or 37.5 degrees? What was
stock, and can you recommend a good flaring tool set that will do both or
should I stick to one angle? Will be doing all new brake lines during the
restoration in a few years, so don't mind getting a decent flaring kit.
Thanks
Mike Thomas
Pres., Panteras Northwest
Yellow '74 #6328
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
I bought a Brakequip kit that has both flares:
[1]http://www.brakequip.com/shop/high-speed-flaring-tool-kit-profession
al-bq350
They had a deal at the SEMA show if you are not in a hurry.
__________________________________________________________________
From: Mike Thomas <mbefthomas at comcast.net>
To: detomaso at poca.com
Sent: Tuesday, June 9, 2015 5:39 PM
Subject: [DeTomaso] Clutch Line Flaring
I need to cut the line to my clutch master to install a nut to meet the
end
of the fitting on one of the CNC clutch masters. Can someone who has
one of
these tell me if the ends of the connector are 45 or 37.5 degrees?
What was
stock, and can you recommend a good flaring tool set that will do both
or
should I stick to one angle? Will be doing all new brake lines during
the
restoration in a few years, so don't mind getting a decent flaring kit.
Thanks
Mike Thomas
Pres., Panteras Northwest
Yellow '74 #6328
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at poca.com
[3]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. http://www.brakequip.com/shop/high-speed-flaring-tool-kit-professional-bq350
2. mailto:DeTomaso at poca.com
3. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list