[DeTomaso] Extracting broken bolts by EDM disintegration
Gpd4
gpd4 at juno.com
Tue Nov 4 20:07:27 EST 2014
I owned a machine shop for a while and an EDM is an unreal piece of equipment. The operator would literally vaporize whatever had broken off in the hole without damaging anything else.
I miss that machine.
GPD4
Sent from my iPhone
> On Nov 4, 2014, at 4:51 PM, Bill Lewis <lotus0005 at hotmail.com> wrote:
>
> HOT ROD Magazine for December 2014 - has an article about removing
> broken bolts, bits, taps, etc., from metal objects with a machine
> called an Elox "Electrical Discharge machine" (EDM), which was
> originally built in the 1940's. The process, "can non-invasively
> vaporize the broken part, leaving the surrounding material unscathed."
>
> ---------------------------------------------------------------------
> If you are interested or need more info: Jim's Tap Extracting
> www.extractit.com I am not familiar with this, but the word
> "vaporize" really caught my attention. ----BILL Lewis
> ____________________________________________________________
> Kill Snoring With This
> Snoring Can Be Life Threatening. Learn More
> http://thirdpartyoffers.juno.com/TGL3165/5459758ff140c758f43a9mp02vuc
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list