[DeTomaso] Extracting broken bolts by EDM disintegration

[Bill Lewis]

HOT ROD Magazine for December 2014 - has an article about removing broken bolts, bits, taps, etc., from metal objects with a machine called an Elox "Electrical Discharge machine" (EDM), which was originally built in the 1940's.  The process, "…can non-invasively  vaporize the broken part, leaving the surrounding material unscathed."    ---------------------------------------------------------------------  If you are interested or need more info:  Jim's Tap Extracting   www.extractit.com       I am not familiar with this, but the word "vaporize" really caught my attention.    ----BILL Lewis 		 	   		  
-------------- next part --------------
   HOT ROD Magazine for December 2014 - has an article about removing
   broken bolts, bits, taps, etc., from metal objects with a machine
   called an Elox "Electrical Discharge machine" (EDM), which was
   originally built in the 1940's.  The process, "can non-invasively
   vaporize the broken part, leaving the surrounding material unscathed."

   ---------------------------------------------------------------------
   If you are interested or need more info:  Jim's Tap Extracting
   www.extractit.com       I am not familiar with this, but the word
   "vaporize" really caught my attention.    ----BILL Lewis