[DeTomaso] 351 C help..

[Roger]

Thanks everyone for the input, I knew that I could rely on you all
Roger

Sent from  Roger's iPhone

On 7 Jun 2013, at 22:21, JDeRyke at aol.com wrote:

> Roger, factory published numbers are 550 lbs for a complete engine without carb/air cleaner, starter or flywheel/flexplate. Stock starter is 16 lbs, stock clutch is 20 lbs with disc, stock uncut flywheel is 30 lbs and a Holley or Motorcraft 4bbl is around 8 lbs. So a complete all-stock engine is right around 600 lbs, depending on what you call "complete". Any aluminum or aftermarket parts subtract by about 1/2 the stock piece-part wts above. Hope this is not due to some local disaster...? 
> Cheers- J Deryke