[DeTomaso] Engine Break In - Oil Pump Prime
Chance Dorsey
chance.dorsey at yahoo.com
Fri Feb 1 23:32:10 EST 2013
CCW is the correct way.
I also rotated the crank two full turns (From TDC 1 to TDC 1) while I was running the drill.
Thanks,
Chance Dorsey
Austin, TX
On Feb 1, 2013, at 8:50 PM, sean mundy <seanmundy at hotmail.com> wrote:
>
> I've finally got my ZF and new engine back in my car and getting closer to first startup.
> After filling up with oil I am trying to spin the oil pump to prime the engine but I'm not seeing results.
> I have spun my drill in reverse and clockwise for over a minute each way but no oil has yet emerged
> from the rockers and into the top of the heads. The drill has way more drag in the reverse direction but nothing
> is happening. Do I got this right? Thanks, Sean
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list