[DeTomaso] Engine Break In - Oil Pump Prime
Sean
seanmundy at hotmail.com
Fri Feb 1 23:48:59 EST 2013
I guess I need to be patient and let the drill do the spinning. I will try tomorrow and let you know. Thanks!!!
Sent from my iPhone
On Feb 1, 2013, at 8:32 PM, Chance Dorsey <chance.dorsey at yahoo.com> wrote:
> CCW is the correct way.
>
> I also rotated the crank two full turns (From TDC 1 to TDC 1) while I was running the drill.
>
> Thanks,
>
> Chance Dorsey
> Austin, TX
>
> On Feb 1, 2013, at 8:50 PM, sean mundy <seanmundy at hotmail.com> wrote:
>
>>
>> I've finally got my ZF and new engine back in my car and getting closer to first startup.
>> After filling up with oil I am trying to spin the oil pump to prime the engine but I'm not seeing results.
>> I have spun my drill in reverse and clockwise for over a minute each way but no oil has yet emerged
>> from the rockers and into the top of the heads. The drill has way more drag in the reverse direction but nothing
>> is happening. Do I got this right? Thanks, Sean
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> http://poca.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list