[DeTomaso] clutch slave not compressing fully
SOBill at aol.com
SOBill at aol.com
Wed May 9 15:57:49 EDT 2012
Jim,
If you remove the spring and disconnect the slave from the linkage, you
should be able to push the slave piston all the way up into the slave
cylinder. If you can do that, the slave is not the problem. If you can't do that
something is wrong with the slave.
The spring is quite strong. Takes vise grips to install or remove.
If the slave cylinder is ok, something is wrong with the linkage between
the slave and the clutch. That linkage should easily move so as to push the
slave piston up into the cylinder.
Have fun today,
sobill at aol.com
More information about the DeTomaso
mailing list