[DeTomaso] Crank Pulley spacer

[B Hower]

What brand is the damper? My PFS-80006 required a spacer and they can supply one per type engine.
 
Bud #3400 ( hitting on eight )

--- On Fri, 6/1/12, doug351c <doug351c at gmail.com> wrote:


From: doug351c <doug351c at gmail.com>
Subject: [DeTomaso] Crank Pulley spacer
To: "DeTomaso Forum" <detomaso at realbig.com>
Date: Friday, June 1, 2012, 4:15 PM


Guys,

One of our local POCA members, Warren Lubow, just installed his new engine.
I was over helping him with his wiring and noticed that his stock water pump
pulley is about 0.30" farther forward than his stock crank pulley.  He has
an aftermarket stroker crank and harmonic damper.  It apears that his damper
thickness is too thin, compared to the stock damper, by the missing amount
of distance.  Has anyone run into this same problem and arrived at a
solution that doesn't involve a custom machined spacer to move the crank
pulley forward.  Does such a spacer already exist?

Doug Braun
blue 73L #5505

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso