[DeTomaso] Crank Pulley spacer
doug351c
doug351c at gmail.com
Sat Jun 2 13:18:59 EDT 2012
We already verified that the water pump pulley is the correct distance from
the block by comparing with another Pantera.
-----Original Message-----
From: Forest Goodhart [mailto:forestg at att.net]
Sent: Friday, June 01, 2012 2:21 PM
To: doug351c at gmail.com; DeTomaso Forum
Subject: Re: [DeTomaso] Crank Pulley spacer
What about the rest of the pulleys? It could be the crank or the dampener
or the water pump.
----------------------------------------------------------------------------
--
From: doug351c <doug351c at gmail.com>
To: DeTomaso Forum <detomaso at realbig.com>
Sent: Fri, June 1, 2012 2:16:29 PM
Subject: [DeTomaso] Crank Pulley spacer
Guys,
One of our local POCA members, Warren Lubow, just installed his new
engine.
I was over helping him with his wiring and noticed that his stock water
pump
pulley is about 0.30" farther forward than his stock crank pulley. He has
an aftermarket stroker crank and harmonic damper. It apears that his
damper
thickness is too thin, compared to the stock damper, by the missing amount
of distance. Has anyone run into this same problem and arrived at a
solution that doesn't involve a custom machined spacer to move the crank
pulley forward. Does such a spacer already exist?
Doug Braun
blue 73L #5505
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list