[DeTomaso] Signal-cancel cam
Jim Gray
grayjim at att.net
Tue Aug 21 14:17:25 EDT 2012
Actually, Dave, I think it goes at 9:00 position, IIRC. SOBill has some
pictures posted on the POCA gallery, I think.
Jim Gray
----- Original Message ----
From: Dave Londry <davel at emspace.com>
To: Pantera List <DeTomaso at realbig.com>
Sent: Tue, August 21, 2012 12:44:05 PM
Subject: [DeTomaso] Signal-cancel cam
I have one of those cams which is in the top position with the
wheel/steering straight and I imagine it should be at 3 o'clock.
What's the easy way to re-position it?
I have Mike's note about replacing it, but can it be re-indexed the same
way?
tks
dave
"All you have to do to change the cam is remove the steering wheel hub.
There's a spring under the hub, and the cam is in between the spring and
the hub. It just slides right over the end of the shaft. It acts upon the
switch but isn't a part of it. There's a projection on the face of the cam
which engages a groove or hole in the steering wheel hub so that the cam
turns with the wheel/hub."
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list