[DeTomaso] Signal-cancel cam

[Dave Londry]

OK - too much travel at 3:00 I guess.
Any clue on the method?
dave

On 21/08/2012 11:17 AM, Jim Gray wrote:
> Actually, Dave, I think it goes at 9:00 position, IIRC.  SOBill has some
> pictures posted on the POCA gallery, I think.
>
> Jim Gray
>
>
>
> ----- Original Message ----
> From: Dave Londry <davel at emspace.com>
> To: Pantera List <DeTomaso at realbig.com>
> Sent: Tue, August 21, 2012 12:44:05 PM
> Subject: [DeTomaso] Signal-cancel cam
>
> I have one of those cams which is in the top position with the
> wheel/steering straight and I imagine it should be at 3 o'clock.
>
> What's the easy way to re-position it?
> I have Mike's note about replacing it, but can it be re-indexed the same
> way?
>
> tks
> dave
>
> "All you have to do to change the cam is remove the steering wheel hub.
> There's a spring under the hub, and the cam is in between the spring and
> the hub.  It just slides right over the end of the shaft.  It acts upon the
> switch but isn't a part of it.  There's a projection on the face of the cam
> which engages a groove or hole in the steering wheel hub so that the cam
> turns with the wheel/hub."
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>