[DeTomaso] Wheels again

[Dmaument]

Dennis claims the timken conversion moves the hub 3/16" and I do have the rotor conversion too. 

Sent from my iPad

On May 19, 2011, at 8:14 PM, Larry Finch <fresnofinches at aol.com> wrote:

> 
> .... I have Quella's roller bearing upright conversion and it moves the hub out....
> ----------------
> 
> Are you sure about that?  I also have Quella's tapered roller bearing conversion, and the hub is
> positioned as stock. I run Pantera East Campys 17x11 and 335/35x17.  The backspacing is 6.5"
> 
> With heavily rolled fender lips, fender contact is only on 
> big downhill expansion joints or with luggage and passenger.
> 
> NOW, if you have a rear rotor conversion also, THAT may have moved things outboard. 
> 
> Obviously, YMMV.
> 
> Larry
> 
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso