[DeTomaso] Swapping Clutch Maser - HELP

[MikeLDrew at aol.com]

In a message dated 5/18/11 22 29 28, artstephens at verizon.net writes:


> I used a hole saw to put a 2.25 inch hole in the side of the pedal box, 
> (2.5
> would work better and plugs are easier to find). That was one of the best
> modifications I have ever done to my car. It made changing the clutch 
> master
> infinitely easier.
> 

...although it was completely unnecessary, because you didn't actually have 
to pull that pin/clevis/rod out in the first place?   What you did was make 
a miserable job much easier, true...but a job that doesn't need to be done 
shouldn't be done, easy or no. :>)

Mike (wish I had thought of doing it th smart way, by pulling the pushrod 
out of the master and leaving it in place, but after struggling for years 
changing other people's masters the hard way, I learned the smart technique 
from Wilkinson....)