[DeTomaso] ZF questions

[Dave Londry]

I gave it a try Bill, but it felt like tearing.
Didn't take any time to slip the shaft out and in again though.
tks
dave

On 3/27/2011 2:23 PM, bill gaino wrote:
> Dave, I just installed mine last week. I just streached it over that thick spacer. If you don't want to, you can take the side cover off and remove the 2 setscrews. Seems I had to move that shaft from one trans to the other when I swapped them. Perhaps the allen wrench goes through a hole with a rubber plug in it on the side cover, feel around underside.  Bill 1362
> -----Original Message-----
>> From: Dave Londry<davel at emspace.com>
>> Sent: Mar 27, 2011 5:10 PM
>> To: Pantera List<DeTomaso at realbig.com>
>> Subject: [DeTomaso] ZF questions
>>
>>
>> My ZF didn't have a bellows over the "Gearshift Operating Shaft" (#627
>> in the manual exploded view).
>> In order to install one, I need to get the splined stub-shaft, off the
>> end of the shaft.
>> It's held on with what looks like a tapered, hollow pin
>>   and the end that I need to whack to get it out is next to the main
>> body, so I can't get at it.
>> Anybody have a neat way of removing it, before I take off the selector
>> cover??
>>
>> tks
>> dave
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>
> If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com
>
>