[DeTomaso] ZF questions

[bill gaino]

Dave, I just installed mine last week. I just streached it over that thick spacer. If you don't want to, you can take the side cover off and remove the 2 setscrews. Seems I had to move that shaft from one trans to the other when I swapped them. Perhaps the allen wrench goes through a hole with a rubber plug in it on the side cover, feel around underside.  Bill 1362
-----Original Message-----
>From: Dave Londry <davel at emspace.com>
>Sent: Mar 27, 2011 5:10 PM
>To: Pantera List <DeTomaso at realbig.com>
>Subject: [DeTomaso] ZF questions
>
>
>My ZF didn't have a bellows over the "Gearshift Operating Shaft" (#627 
>in the manual exploded view).
>In order to install one, I need to get the splined stub-shaft, off the 
>end of the shaft.
>It's held on with what looks like a tapered, hollow pin
>  and the end that I need to whack to get it out is next to the main 
>body, so I can't get at it.
>Anybody have a neat way of removing it, before I take off the selector 
>cover??
>
>tks
>dave
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso


If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com