[DeTomaso] Heater Box

[gow2 at rc-tech.net]

Thank You. New ideas always bring....new problems! :)


> I like your work. Very impressive!
> Cheers Bjoern
>
>
>
>
> On Sun, Mar 13, 2011 at 11:05 PM, <gow2 at rc-tech.net> wrote:
>
>> I have mentioned before the heater box I am working on. I took some more
>> photos today. This is all from scratch project. There is nothing stock
>> about what I am doing. There is no a/c just heat or fan. An unfortunate
>> part of my construction is that the box will need to be riveted to the
>> chassis before putting in the fan. This requires some assembly of the
>> box
>> as I put it together (which is not yet). Right now it just requires a
>> lot
>> of clecos.
>>
>> There are 8 sets of doors to be operated by servo. There is a fresh air
>> intake, recirculated air, 2-defog, 2-floor heater and 2 fresh air vents.
>> These will all be operated by servos controlled through an Arduino:
>>
>> http://www.arduino.cc/
>>
>> The Arduino will allow me to program any control over any vent I would
>> like.
>>
>> This is the mock up of what had been constructed so far. What is left is
>> mounting servos, a little heater core fitment, and programing the
>> Arduino:
>>
>>
>> These are the fresh air doors:
>>
>> http://www.rc-tech.net/pantera1/hb/hb6.jpg
>>
>> http://www.rc-tech.net/pantera1/hb/hb8.jpg
>>
>> The recirculation vent being the big round vent on top. Aluminum flat
>> was
>> bent round and welded to make ducts:
>>
>> http://www.rc-tech.net/pantera1/hb/hb9.jpg
>>
>> http://www.rc-tech.net/pantera1/hb/hb10.jpg
>>
>> Anyway, kind of different.
>>
>> Gary
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>