[DeTomaso] Heater Box

[Bjoern Flesland]

I like your work. Very impressive!
Cheers Bjoern




On Sun, Mar 13, 2011 at 11:05 PM, <gow2 at rc-tech.net> wrote:

> I have mentioned before the heater box I am working on. I took some more
> photos today. This is all from scratch project. There is nothing stock
> about what I am doing. There is no a/c just heat or fan. An unfortunate
> part of my construction is that the box will need to be riveted to the
> chassis before putting in the fan. This requires some assembly of the box
> as I put it together (which is not yet). Right now it just requires a lot
> of clecos.
>
> There are 8 sets of doors to be operated by servo. There is a fresh air
> intake, recirculated air, 2-defog, 2-floor heater and 2 fresh air vents.
> These will all be operated by servos controlled through an Arduino:
>
> http://www.arduino.cc/
>
> The Arduino will allow me to program any control over any vent I would
> like.
>
> This is the mock up of what had been constructed so far. What is left is
> mounting servos, a little heater core fitment, and programing the Arduino:
>
>
> These are the fresh air doors:
>
> http://www.rc-tech.net/pantera1/hb/hb6.jpg
>
> http://www.rc-tech.net/pantera1/hb/hb8.jpg
>
> The recirculation vent being the big round vent on top. Aluminum flat was
> bent round and welded to make ducts:
>
> http://www.rc-tech.net/pantera1/hb/hb9.jpg
>
> http://www.rc-tech.net/pantera1/hb/hb10.jpg
>
> Anyway, kind of different.
>
> Gary
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>