[DeTomaso] Clutch Problem Identified
tmshinro at aol.com
tmshinro at aol.com
Fri Jul 1 19:14:55 EDT 2011
I finally had some time to look for my clutch problem (had to deal with a sick daughter all day and it was 104 degree heat index outside (only a sauna like 87 in the garage).
After dinking around with the slave cylinder I discovered that the clutch arm would not return all the way (the stop bolt was over an inch from the stop). I then saw that the clutch pivot arm that clamps to the ZF shaft had broken at the base of the top clamp. This explains the "snap" I heard when it broke.
So the good news is that I don't have to pull the ZF and shell out for a new clutch. The part is ordered so hopefully I get everything working again next week.
Happy Fourth to everyone.
Tom
#5186
More information about the DeTomaso
mailing list