[DeTomaso] SHIFT ROD CENTER SUPPORT

[JDeRyke at aol.com]

In a message dated 4/2/11 1:43:28 AM, Thomas.Tornblom at hax.se writes:

> I made one out of a rod end and added a teflon bushing:
> http://www.hax.se/trunion2.jpeg
> http://www.hax.se/trunion3.jpeg
> http://www.hax.se/trunion4.jpeg
> http://www.hax.se/trunion5.jpeg
> http://www.hax.se/trunion6.jpeg
> 
And what Thomas didn't mention is, he did this at least 10 years ago. I 
think its a clever design worth copying. No chance of the bushing coming loose 
with a lip on one side and a snap-ring on the other. FWIW- J DeRyke