[DeTomaso] body tilt? Mak
Tomas Gunnarsson
guson at home.se
Sun May 16 16:50:42 EDT 2010
The blue owners manual lists the distance from ground to inner lower A-arm
bolt center.
Front 185 +/- 10 mm, rear 175 +/-10 mm. This is with 185/70-15 and 215/70-15
tires.
In this case the "factory rake" would be with a front figure 10 mm higher
than the rear figure.
Tomas
-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of jjd1010 at aol.com
Sent: den 16 maj 2010 21:11
To: detomaso at realbig.com
Subject: Re: [DeTomaso] body tilt? Mak
Assuming the car had no rake from the factory, a big assumption, the object
is to get the car raked forward from there. Seems that you need to start
with the stock ride height measurements front and back and then adjust
those? Is there anywhere to find out the original measurements? Jack's
suggestion about using the rocker panels is probably as good as you can get
to find something that was level to start with.
Jeff
6559
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list