[DeTomaso] Coolant Screen

[Garth Rodericks]

I've read good things about the Gano filter.

What I like most about the Tefba filter is that there's no need to drain the cooling system and break a hose seal to clean the filter. Merely unscrew the top and lift out the filter screen. Brilliant design!



In a message dated 5/10/10 15 05 32, dsmtjoy at cox.net writes:


> I've been running them for years with no problems.  The only complaint 
> I've
> heard was from one guy who installed one, never checked or cleaned it and
> then got kicked off when it got fully clogged and blew his coolant hose 
> off.
> Contact info below.  Again the usual disclaimers apply.
> 

In a message dated 5/10/10 21 46 58, MikeLDrew at aol.com writes:

Mine blew off because I failed to heed the directions when I installed one 
in my GT350 clone.   They want you to safety-wire the two hose clamps 
together.  I couldn't see the need, so I didn't.   Then I romped on the gas, at 
6000 rpm the motor torqued on the mounts, pulled the filter out of the 
radiator hose, and BLEAH!   the water got pumped into the radiator fan, then blew 
all over my freshly detailed engine bay.

Grrr!!!

The filter itself worked really well; it was amazing how much gick was 
extracted from the cooling system...

Mike