[DeTomaso] head drilling for air release

[MikeLDrew at aol.com]

In a message dated 9/3/09 6 59 4, asajay at asajay.com writes:


> I found out from a Ferarri friend, the recommended procedure for his
> Ferarri is to run a tube from a top radiator bleed back to the swirl
> tank.  Run the engine until there are no air bubbles, then seal the
> radiator bleed.  All done.
> 
Some L-model Panteras were configured that way from the factory, and there 
is also a TSB to that effect.

Experience ultimately showed that it didn't work, apparently, because I 
believe the later '73-74 cars did away with the feature.

Mike