[DeTomaso] ?Car stalls with hard braking to a stop only, not curves etc
Don Thomas
dtpantera at gmail.com
Mon May 11 01:06:43 EDT 2009
I would also check and see if you have the Holley 26-89 Fuel Bowl vent Baffle installed.
If you don't have that, I would... at a minimum... get that installed.
I hope that helps.
-dt
RKMosier at aol.com wrote:
> More than likely that sloshing is it. Mine does it also. I have lowered
> the float level a little more than normal. For a while, per a tech at
> Holley, I ran a hose from one vent to the other with a v cut in the middle and
> on the top. Apparently an old race trick. That helped but did not
> eliminate the problem. I guess I could lower the float more but not being a carb
> expert either I don't know what the down side to that is. Anyone have an
> idea?
>
> Richard
> 3714
>
More information about the DeTomaso
mailing list