[DeTomaso] Heater Hoses & Pipes

[SOBill at aol.com]

You can bend the pipes IF you use a tubing bender tool. Most any  auto store 
or home repair store sells tubing benders. They come in sizes to fit  
different diameter tubes. If you try to bend it without a tubing bender, you  will 
kink the pipe instead.
 
Thomas gives good advice. If you slip enough hose on the tube  so you can use 
two hose clamps, you will be doubly OK.
 
Have fun.
 
SOBill  Taylor
sobill at aol.com  






**************It's only a deal if it's where you want to go. Find your travel 
deal here.      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)