[DeTomaso] Bolt length

[Doug Braun]

The stock 351C head bolts I have measured out as 1/2NC-13 x 4.25".  I put
one through a spare head and it extends 1.05" below the head deck.

Doug Braun
blue 73L #5505

-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of Fredrik Gustavsson
Sent: Sunday, November 11, 2007 10:20 AM
To: detomaso at realbig.com
Subject: [DeTomaso] Bolt length


How long are the stock cylinder heads bolts and how deep  in the block are
they when installed?
I need to know this before I start to fabricate the torque plate.

Thanks
Fredrik