[DeTomaso] Clutch Slave Bleeder
michael frazier
red3644 at hotmail.com
Sat Jun 29 19:42:35 EDT 2024
If you have trouble bleeding your clutch slave cylinder as I recently had, this may save you some time and aggravation. It seemed like I couldn’t get fluid to the slave. I started at the master working my way back looking for the problem. I then removed the bleeder and confirmed fluid in the cylinder. I happened to look at the bleeder and saw that there was no hole drilled for air or fluid to pass thru. Just the hold in the end. Well that’s a new one for me. This was a new slave from a vendor. They may or may not have the same source. Hope this helps.
Michael[image0.jpeg]
Sent from my iPhone
-------------- next part --------------
If you have trouble bleeding your clutch slave cylinder as I recently
had, this may save you some time and aggravation. It seemed like I
couldn't get fluid to the slave. I started at the master working my way
back looking for the problem. I then removed the bleeder and confirmed
fluid in the cylinder. I happened to look at the bleeder and saw that
there was no hole drilled for air or fluid to pass thru. Just the hold
in the end. Well that's a new one for me. This was a new slave from a
vendor. They may or may not have the same source. Hope this helps.
Michael image0.jpeg
Sent from my iPhone
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 189942 bytes
Desc: image0.jpeg
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20240629/e268c939/attachment.jpeg>
More information about the DeTomaso
mailing list